[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 23.

twente-mining

member

Activity: 176

Merit: 10

Quote from: Nvid on March 20, 2018, 04:33:28 AM

Quote from: ciprianpt on March 19, 2018, 05:19:38 AM

Hey ppl

I just finished testing the new v 0.6 with most of the Nvidia GTX 10xx cards, results below

GTX 1050 4GB Ti = 180 Sol/s
GTX 1060 3GB = 325 Sol/s
GTX 1060 6GB = 345 Sol/s
GTX 1070 8GB = 460 Sol/s
GTX 1070 11GB Ti = 480 Sol/s
GTX 1080 11GB Ti = 650 - 685 Sol/s

for more details check http://1stminingrig.com/new-dstms-zcash-cuda-miner-0-6-tested-reviewed/

averages from my rigs :

GTX 1070 8GB = 490 ~ 500 Sol/s
GTX 1070 TI 8GB = 510 ~ 525 Sol/s ( depending on type )
GTX 1080 TI 11GB = 718 ~ 760 Sol/s ( depending on type )

blazeaglory

newbie

Activity: 21

Merit: 0

Quote from: dwarren on March 19, 2018, 03:44:04 PM

Any numbers on a 1080 8GB ?

Im running a Gigabyte Windforce and getting roughly 500-550 sol/s (1 GPU) on average but Ill see it at 600 sol/s at times. Non OC. Stock settings

Sometimes when checking "current hash rate" via the API I'll see 800 sol/s or more but I just toss that up to some kind of misread or error.

crypper

member

Activity: 239

Merit: 12

Quote from: leonix007 on March 20, 2018, 12:29:14 AM

Quote from: ahmedshawki on March 19, 2018, 10:02:54 PM

if anybody can help what is the best miner and best pool to mine zec ?

Best miner will depends on your type of card, for Nvidia you came here at the right place.

for the pool, Flypool is my choice.

Regardless of what type of cards you have, Eth is the most profitable coin to mine for the last few weeks. So grab yourself a Claymore and mine ETH (ethermine.org is probably the most popular pool for that). If you prefer to have ZEC (which I don't) then miningpoolhub with auto-exchange may be a good choice.

OlimpFil

newbie

Activity: 7

Merit: 0

Hi DSTM!
I have a question about telemetry. The telemetry message does not display the latest, up-to-date information, but only the average value? It is quite logical to see the actual, the latest information, taken from the log of the miner, because possibly overclocking was increased, or other manipulations were performed and the average readings would not immediately reflect this change. In my opinion, the current hash is more important in monitoring than the average, which is smeared in time.

Nvid

newbie

Activity: 39

Merit: 0

Quote from: ciprianpt on March 19, 2018, 05:19:38 AM

Hey ppl

I just finished testing the new v 0.6 with most of the Nvidia GTX 10xx cards, results below

GTX 1050 4GB Ti = 180 Sol/s
GTX 1060 3GB = 325 Sol/s
GTX 1060 6GB = 345 Sol/s
GTX 1070 8GB = 460 Sol/s
GTX 1070 11GB Ti = 480 Sol/s
GTX 1080 11GB Ti = 650 - 685 Sol/s

for more details check http://1stminingrig.com/new-dstms-zcash-cuda-miner-0-6-tested-reviewed/

These are top sols you can get from your nvidias. However I recommend not using highest possible clocks on your cards as lifespan will be shortened significantly.

Regards,
Hristo

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: ahmedshawki on March 19, 2018, 10:02:54 PM

if anybody can help what is the best miner and best pool to mine zec ?

Best miner will depends on your type of card, for Nvidia you came here at the right place.

for the pool, Flypool is my choice.

Xman79

jr. member

Activity: 62

Merit: 1

Best miner: dstm

ahmedshawki

newbie

Activity: 47

Merit: 0

if anybody can help what is the best miner and best pool to mine zec ?

Vispilio

legendary

Activity: 2128

Merit: 1657

if anybody did make the switch to DSTM from EWBF for mining with 1080 TI's, how did you modify your OC settings, and did you perceive any notable hash rate improvement over EWBF with the latest 0.6 version of DSTM ?

p.s. just read the notes above: for example on EWBF for ZCASH the memory overclock makes no tangible difference whatsoever, in fact some people even put it to negative to save a bit more on watts. Does it behave differently on DSTM ? I would presume for ZCASH only the Core clock matters.

Thanks in advance

dwarren

newbie

Activity: 11

Merit: 0

Quote from: ciprianpt on March 19, 2018, 05:19:38 AM

Hey ppl

I just finished testing the new v 0.6 with most of the Nvidia GTX 10xx cards, results below

GTX 1050 4GB Ti = 180 Sol/s
GTX 1060 3GB = 325 Sol/s
GTX 1060 6GB = 345 Sol/s
GTX 1070 8GB = 460 Sol/s
GTX 1070 11GB Ti = 480 Sol/s
GTX 1080 11GB Ti = 650 - 685 Sol/s

for more details check http://1stminingrig.com/new-dstms-zcash-cuda-miner-0-6-tested-reviewed/

Any numbers on a 1080 8GB ?

snovik

newbie

Activity: 54

Merit: 0

Quote from: ciprianpt on March 19, 2018, 05:19:38 AM

Hey ppl

I just finished testing the new v 0.6 with most of the Nvidia GTX 10xx cards, results below

GTX 1050 4GB Ti = 180 Sol/s
GTX 1060 3GB = 325 Sol/s
GTX 1060 6GB = 345 Sol/s
GTX 1070 8GB = 460 Sol/s
GTX 1070 11GB Ti = 480 Sol/s
GTX 1080 11GB Ti = 650 - 685 Sol/s

for more details check http://1stminingrig.com/new-dstms-zcash-cuda-miner-0-6-tested-reviewed/

EVGA 1070 SC = 485-490 sols/s
EVGA 1080ti FTW3 = 720-730 sols/s

both on ca. 70% of power and some OC to improve efficiency

ciprianpt

jr. member

Activity: 127

Merit: 8

Hey ppl

I just finished testing the new v 0.6 with most of the Nvidia GTX 10xx cards, results below

GTX 1050 4GB Ti = 180 Sol/s
GTX 1060 3GB = 325 Sol/s
GTX 1060 6GB = 345 Sol/s
GTX 1070 8GB = 460 Sol/s
GTX 1070 11GB Ti = 480 Sol/s
GTX 1080 11GB Ti = 650 - 685 Sol/s

for more details check http://1stminingrig.com/new-dstms-zcash-cuda-miner-0-6-tested-reviewed/

jpl

member

Activity: 154

Merit: 11

for dstm.. possible naming of cards for ordering?

https://access.redhat.com/solutions/112643

linux though and not sure if it applies to windows.

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: xenonwon on March 18, 2018, 06:37:46 AM

The miner has been working for a week without problems but the last two days that this happens every 2 or 3 hours, some solution?

2018-03-15 3:27:04|gpu_id 2 76 0 an illegal instruction was encountered
2018-03-15 3:27:04|gpu 2 unresponsive - check overclocking
2018-03-15 3:27:04|cudaMemcpy 1 failed

Thanks!

One GPU is failing, check your Riser, or if you have an extra try to replace them.

if it happens its an open rig and have some dust then make some cleaning maintenance

xenonwon

newbie

Activity: 42

Merit: 0

The miner has been working for a week without problems but the last two days that this happens every 2 or 3 hours, some solution?

2018-03-15 3:27:04|gpu_id 2 76 0 an illegal instruction was encountered
2018-03-15 3:27:04|gpu 2 unresponsive - check overclocking
2018-03-15 3:27:04|cudaMemcpy 1 failed

Thanks!

jpl

member

Activity: 154

Merit: 11

win 10 64x.. have you guys seen all these update crazy settings with win 10?.. what the f should I disable?.. looks like almost everything..

{Press the Windows logo key + R then type gpedit.msc and click OK.
Go to Computer Configuration > Administrative Templates > Windows Components > Windows Update.
Double-click Configure Automatic Updates.
More items...}

atecubanoS

newbie

Activity: 32

Merit: 0

@dstm,

Any chance to see % of GPU fan usage at telemetry?

Thanks!

jpl

member

Activity: 154

Merit: 11

Quote from: dwarren on March 16, 2018, 11:37:28 AM

Not sure if this is a bug with new version Huh

The GPU are not ordered when displaying HashRate.

You can see GPU1 is showing first ??

Quote

# GPU0 GeForce GTX 1080 MB: 8114 PCI: 1:0
# GPU1 GeForce GTX 1080 MB: 8114 PCI: 3:0
# GPU2 GeForce GTX 1080 MB: 8114 PCI: 4:0
# GPU3 GeForce GTX 1080 MB: 8114 PCI: 5:0
# GPU4 GeForce GTX 1080 MB: 8114 PCI: 8:0
# GPU5 GeForce GTX 1080 MB: 8114 PCI: 9:0
# pool1 us1-zcash.flypool.org:3333
# connected to: us1-zcash.flypool.org:3333 [1/1]
# server set difficulty to: 0004189374bc6a7ef9db22d0...
> GPU1 42C Sol/s: 522.9 Sol/W: 4.19 Avg: 522.9 I/s: 278.6 Sh: 0.00 . .
> GPU0 46C Sol/s: 516.5 Sol/W: 4.16 Avg: 516.5 I/s: 277.8 Sh: 5.99 1.00 200
> GPU2 47C Sol/s: 523.0 Sol/W: 4.21 Avg: 523.0 I/s: 280.9 Sh: 0.00 . .
> GPU3 39C Sol/s: 529.1 Sol/W: 4.26 Avg: 529.1 I/s: 283.2 Sh: 5.97 1.00 200
> GPU4 46C Sol/s: 523.6 Sol/W: 4.24 Avg: 523.6 I/s: 278.1 Sh: 5.99 1.00 199
> GPU5 46C Sol/s: 514.1 Sol/W: 4.29 Avg: 514.1 I/s: 278.5 Sh: 0.00 . .
========== Sol/s: 3129.3 Sol/W: 4.22 Avg: 3129.3 I/s: 1677.1 Sh: 17.95 1.00 199
> GPU1 42C Sol/s: 522.9 Sol/W: 4.19 Avg: 522.9 I/s: 278.6 Sh: 0.00 . .
> GPU0 46C Sol/s: 516.5 Sol/W: 4.16 Avg: 516.5 I/s: 277.8 Sh: 5.99 1.00 200
> GPU2 47C Sol/s: 523.0 Sol/W: 4.21 Avg: 523.0 I/s: 280.9 Sh: 0.00 . .
> GPU3 39C Sol/s: 529.1 Sol/W: 4.26 Avg: 529.1 I/s: 283.2 Sh: 5.97 1.00 200
> GPU4 46C Sol/s: 523.6 Sol/W: 4.24 Avg: 523.6 I/s: 278.1 Sh: 5.99 1.00 199
> GPU5 46C Sol/s: 514.1 Sol/W: 4.29 Avg: 514.1 I/s: 278.5 Sh: 0.00 . .
========== Sol/s: 3129.3 Sol/W: 4.22 Avg: 3129.3 I/s: 1677.1 Sh: 17.95 1.00 199

ZM uses CUDA_DEVICE_ORDER. Nvidia specifies it's default behaviour like this:
FASTEST_FIRST causes CUDA to guess which device is fastest using a simple heuristic, and make that device 0, leaving the order of the rest of the devices unspecified.

The default behaviour can be changed by setting the environment variable 'CUDA_DEVICE_ORDER' to 'PCI_BUS_ID' which causes CUDA to order the devices by '... PCI bus ID in ascending order'.

The documentation for this is located at: http://docs.nvidia.com/cuda/cuda-c-programming-guide/index.html#env-vars

... this is from a couple threads before...

dwarren

newbie

Activity: 11

Merit: 0

Not sure if this is a bug with new version Huh

The GPU are not ordered when displaying HashRate.

You can see GPU1 is showing first ??

Quote

# GPU0 GeForce GTX 1080 MB: 8114 PCI: 1:0
# GPU1 GeForce GTX 1080 MB: 8114 PCI: 3:0
# GPU2 GeForce GTX 1080 MB: 8114 PCI: 4:0
# GPU3 GeForce GTX 1080 MB: 8114 PCI: 5:0
# GPU4 GeForce GTX 1080 MB: 8114 PCI: 8:0
# GPU5 GeForce GTX 1080 MB: 8114 PCI: 9:0
# pool1 us1-zcash.flypool.org:3333
# connected to: us1-zcash.flypool.org:3333 [1/1]
# server set difficulty to: 0004189374bc6a7ef9db22d0...
> GPU1 42C Sol/s: 522.9 Sol/W: 4.19 Avg: 522.9 I/s: 278.6 Sh: 0.00 . .
> GPU0 46C Sol/s: 516.5 Sol/W: 4.16 Avg: 516.5 I/s: 277.8 Sh: 5.99 1.00 200
> GPU2 47C Sol/s: 523.0 Sol/W: 4.21 Avg: 523.0 I/s: 280.9 Sh: 0.00 . .
> GPU3 39C Sol/s: 529.1 Sol/W: 4.26 Avg: 529.1 I/s: 283.2 Sh: 5.97 1.00 200
> GPU4 46C Sol/s: 523.6 Sol/W: 4.24 Avg: 523.6 I/s: 278.1 Sh: 5.99 1.00 199
> GPU5 46C Sol/s: 514.1 Sol/W: 4.29 Avg: 514.1 I/s: 278.5 Sh: 0.00 . .
========== Sol/s: 3129.3 Sol/W: 4.22 Avg: 3129.3 I/s: 1677.1 Sh: 17.95 1.00 199
> GPU1 42C Sol/s: 522.9 Sol/W: 4.19 Avg: 522.9 I/s: 278.6 Sh: 0.00 . .
> GPU0 46C Sol/s: 516.5 Sol/W: 4.16 Avg: 516.5 I/s: 277.8 Sh: 5.99 1.00 200
> GPU2 47C Sol/s: 523.0 Sol/W: 4.21 Avg: 523.0 I/s: 280.9 Sh: 0.00 . .
> GPU3 39C Sol/s: 529.1 Sol/W: 4.26 Avg: 529.1 I/s: 283.2 Sh: 5.97 1.00 200
> GPU4 46C Sol/s: 523.6 Sol/W: 4.24 Avg: 523.6 I/s: 278.1 Sh: 5.99 1.00 199
> GPU5 46C Sol/s: 514.1 Sol/W: 4.29 Avg: 514.1 I/s: 278.5 Sh: 0.00 . .
========== Sol/s: 3129.3 Sol/W: 4.22 Avg: 3129.3 I/s: 1677.1 Sh: 17.95 1.00 199

jpl

member

Activity: 154

Merit: 11

Quote from: romansteel on March 14, 2018, 11:23:29 PM

What do I do about zm.exe being blocked from accessing graphics hardware (Windows 10)?

Google windows defender allow program

Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 23. (Read 225062 times)