[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 44.

dstm

full member

Activity: 350

Merit: 126

Quote from: minebomb on February 03, 2018, 01:46:20 AM

hi DSTM

please help me.

with reference to two rigs of mine that do over 3000 sols each.

almost every morning when i wake up i notice no hashrate on pool monitor for these two rigs. i then check miner and see -
connection closed by server r 0
reconnecting

what do i do ?
i have done much troubleshooting with no luck.

regards

note: i have other rigs under 3000sols on the same network that dont do this

What OS/zm-version are you on?
I'm getting similar reports recently, not sure why, are you on 0.5.8?

To make sure I'm understanding you right - zm doesn't start to mine and the last message is 'reconnecting' right?
ZM stops the GPUs during connection loss/reconnection periods to save energy, so if your system isn't stable (e.g. overclocked / unstable power supply) it's likely to fail on phases where GPUs are stopped and restarted again - the fact that your other rigs reconnect without issues seems to support this.

BansheeHero

newbie

Activity: 23

Merit: 0

Quote from: dstm on February 07, 2018, 03:30:15 PM

Quote from: m1n1ngP4d4w4n on January 29, 2018, 11:02:54 AM

Hey dtsm, how's the new version coming ? any approx ETA ? Will it be available in cuda 9.1 ?

keep up the good work !

This weekend +- a couple days seems realistic.
No it won't be compiled against cuda 9.1 in the next release. ZM's solution rate decreases by about 2% when compiled against it - so this requires a more detailed analysis first.

Any chance you could add support for Power Limit to the version? Afterburner reports it as Power % on Pascal GPUs.
It is so much work to match solutions to watt to TDP limits.

dstm

full member

Activity: 350

Merit: 126

Quote from: akuci on January 31, 2018, 03:00:22 PM

I got random disconnection issues with Nicehash pool. It says something about not supporting protocol v.01000020.

Anyway, what about 0.6? Any release date?

Support for protocol 01000020 was added in 0.5.8.

This weekend +- a couple days seems realistic.

dstm

full member

Activity: 350

Merit: 126

Quote from: bigfootnz on January 31, 2018, 02:40:05 PM

Hi dstm, I had problem on my one rig. Your miner has just stopped with error disconnected from server and stop working. It didn't try to reconnect or anything. On this location I've 3 rigs and only this one had this error. Can you please explain what is this error and why your miner didn't reconnect automatically? Thanks

This looks strange - does this also happen on 0.5.8?

dstm

full member

Activity: 350

Merit: 126

Quote from: agismaniax on January 31, 2018, 03:32:00 AM

i'm using two GPU in my rig:
- GPU0 GTX 1060 3GB
- GPU1 GTX 1050Ti 4GB

i can't see eficiency sol/w for my GTX 1050Ti, why?

https://i.imgur.com/jEd1A4S.jpg

Nvidia disabled reporting of this data for the 1050Ti in their recent driver versions - it will work if you donwgrade your drivers.

dstm

full member

Activity: 350

Merit: 126

Quote from: m1n1ngP4d4w4n on January 29, 2018, 11:02:54 AM

Hey dtsm, how's the new version coming ? any approx ETA ? Will it be available in cuda 9.1 ?

keep up the good work !

This weekend +- a couple days seems realistic.
No it won't be compiled against cuda 9.1 in the next release. ZM's solution rate decreases by about 2% when compiled against it - so this requires a more detailed analysis first.

dstm

full member

Activity: 350

Merit: 126

Quote from: ?? on ??

Quote from: dstm on January 29, 2018, 08:47:04 AM

Quote from: bluepr0 on January 29, 2018, 08:34:23 AM

Any chance to add pool failover support @dstm?. With EWFB I can setup several pools in case one of the fails

0.6 has it. It's priority based, zm switches to the pool with the highest priority after it gets reachable again.

This is good news, thanks. Any limit on the number of pools?

--ypsi

It's limited to 8 - any issues with it?

joe.inconspicuous

newbie

Activity: 1

Merit: 0

@dstm

Can you add version of the miner into README?

nazzer

member

Activity: 238

Merit: 11

Quote from: theOfficialJoeGG on February 06, 2018, 09:56:24 PM

Quote from: nazzer on February 06, 2018, 02:12:53 AM

Quote from: theOfficialJoeGG on February 06, 2018, 12:39:21 AM

Is it possible to use just 1 device with the miner? I have 2 cards but I sometimes like to game with one so being able to shut off the miner from using one at some points would be nice, even if it requires a separate .bat

Yes.

Code:

Options:
   --help Print this help
   --dev Space separated list of cuda devices
   --list-devices List available cuda devices

How do I use this? I have done "--dev 1" "--dev 980ti" what is the correct variable?

Code:

$ ./zm --list-devices
Device: 0 GeForce GTX 1070 MB: 8119 PCI: 1:0
Device: 1 GeForce GTX 1070 MB: 8119 PCI: 3:0
Device: 2 GeForce GTX 1070 MB: 8119 PCI: 4:0
Device: 3 GeForce GTX 1070 MB: 8119 PCI: 5:0
Device: 4 GeForce GTX 1070 MB: 8119 PCI: 6:0
Device: 5 GeForce GTX 1070 MB: 8119 PCI: 7:0

Devices are numbered as per --list-devices

e.g.

Code:

$ ./zm --dev 0 1 3 5

theOfficialJoeGG

newbie

Activity: 3

Merit: 0

Quote from: nazzer on February 06, 2018, 02:12:53 AM

Quote from: theOfficialJoeGG on February 06, 2018, 12:39:21 AM

Is it possible to use just 1 device with the miner? I have 2 cards but I sometimes like to game with one so being able to shut off the miner from using one at some points would be nice, even if it requires a separate .bat

Yes.

Code:

Options:
   --help Print this help
   --dev Space separated list of cuda devices
   --list-devices List available cuda devices

How do I use this? I have done "--dev 1" "--dev 980ti" what is the correct variable?

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: MrTDHP on February 06, 2018, 04:55:35 PM

Is this dead already? It's been a while since dstm posted something here. Said gonna release 0.6 soon but no sign of it coming Undecided

IF it's does dead they/he will blame it on the fee complainer but that's not why .... we have all said why a few times so I won't go there .

MrTDHP

newbie

Activity: 64

Merit: 0

Is this dead already? It's been a while since dstm posted something here. Said gonna release 0.6 soon but no sign of it coming Undecided

AzzAz

legendary

Activity: 1030

Merit: 1006

@ DSTM:
I noticed that in case network is off ( router restart ) miner goes to loop "retrying" even after network is back. Can you make it try several ( i.e: 5 or 10 times ) than just restart?

God_TM

newbie

Activity: 1

Merit: 0

Quote from: Andrey09 on February 06, 2018, 09:05:29 AM

From Bminer thread live test:

dstm 0.5.8: https://zcash.flypool.org/miners/t1aoQJwvJqYT32xHVpYezWBxKuxPSwaJB1h
bminer 5.3.0: https://zcash.flypool.org/miners/t1dU7Gve41A3b4mxL7a3oVAnBLsF9kMgDgA

So does this indicate they're pretty much equal (I see the current is different, but that varies... the average is pretty much the same, right)?

Andrey09

newbie

Activity: 176

Merit: 0

From Bminer thread live test:

dstm 0.5.8: https://zcash.flypool.org/miners/t1aoQJwvJqYT32xHVpYezWBxKuxPSwaJB1h
bminer 5.3.0: https://zcash.flypool.org/miners/t1dU7Gve41A3b4mxL7a3oVAnBLsF9kMgDgA

nazzer

member

Activity: 238

Merit: 11

Quote from: theOfficialJoeGG on February 06, 2018, 12:39:21 AM

Is it possible to use just 1 device with the miner? I have 2 cards but I sometimes like to game with one so being able to shut off the miner from using one at some points would be nice, even if it requires a separate .bat

Yes.

Code:

Options:
   --help Print this help
   --dev Space separated list of cuda devices
   --list-devices List available cuda devices

theOfficialJoeGG

newbie

Activity: 3

Merit: 0

Is it possible to use just 1 device with the miner? I have 2 cards but I sometimes like to game with one so being able to shut off the miner from using one at some points would be nice, even if it requires a separate .bat

RH1

newbie

Activity: 3

Merit: 0

Quote from: Andrey09 on November 23, 2017, 01:07:33 AM

Hello all.

What happens when "contime" reset but uptime continue count?

Contime means time from last disconnect from pool server?

When appeared "error recv failed: 10054 " ? Due overclocking ?

I having exactly the same ZEC mining error "# recv failed: 10054" It disconnect every minute, Don't know what to do. Don't know why? Please help.

phuocduong

member

Activity: 182

Merit: 10

when have new version?

anotherwave

newbie

Activity: 39

Merit: 0

2% is a lot.. 0.05% is closer to reality for the few lines of code..
[/quote]

Hahaha.. "Few lines of code"... only if... i would have made my own miner long ago.. haha

Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 44. (Read 224961 times)