[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 47.

Failswitch90

newbie

Activity: 5

Merit: 0

Quote from: tlaskows on January 30, 2018, 02:00:41 PM

1080ti crashes at those settings in less than couple hours if not right away.

Nice try.

hobby rig of k80s?

You can get pretty good FPS in Crysis on those...

The miners work on all Nvidias as far as I know.

May have to recompile them from source. Send me your k100 and I will do it. I have done it for AMD, CPU and other Nvidia miners.

It's my old gpu's I used for gaming, two GTX 670's, one 960 and a 660 Tongue

(yes, power is free or I would lose money. As I said, it's a hobby rig Wink

) DSTM's miner appears to only work on maxwell and pascal gpu's as described in OP.

I had my 1080ti at +210 core, but it crashed/froze after 8 hours. So downclocking to 177 might be better. I will keep reducing if it keeps crashing. It is not mining 24/7 as it's my gaming computer Wink

.

tlaskows

full member

Activity: 564

Merit: 100

Join GANTECH’s team of game changers

Quote from: Failswitch90 on January 30, 2018, 12:35:35 PM

Hi, love your miner! Getting average of 730.8 sol/s with a 1080ti at 85% powerlimit +177 core @57^oC. Much better than EWFB's miner

But I have a small "hobby rig" and was curious if support for kepler gpu's will be available? Please say yes Grin

If not, why?

Thanks for a great miner

1080ti crashes at those settings in less than couple hours if not right away.

Nice try.

hobby rig of k80s?

You can get pretty good FPS in Crysis on those...

The miners work on all Nvidias as far as I know.

May have to recompile them from source. Send me your rack of 8 k100s and I will do it. I have done it for AMD, CPU and other Nvidia miners.

Failswitch90

newbie

Activity: 5

Merit: 0

Hi, love your miner! Getting average of 730.8 sol/s with a 1080ti at 85% powerlimit +177 core @57^oC. Much better than EWFB's miner

But I have a small "hobby rig" and was curious if support for kepler gpu's will be available? Please say yes Grin

If not, why?

Thanks for a great miner

tlaskows

full member

Activity: 564

Merit: 100

Join GANTECH’s team of game changers

Just ignore the last post. I'm new to computers. I still use Windows 7.

But these are my clocks and settings and sustained rate. I can get these to over 3000.

I'm freezing down here, but the GPUs can't seem to keep cool.

tlaskows

full member

Activity: 564

Merit: 100

Join GANTECH’s team of game changers

Quote from: NoOneLt on January 30, 2018, 07:56:43 AM

Quote from: tlaskows on January 30, 2018, 07:52:57 AM

Those are not stock clocks for reference design super hot FE.

I can get 2900 easily with power limiting at - 13 and a bit of OC.

So what, its same 1080ti's on different miners... You stated that EWBF is faster, its not at least on my hardware.

Because it is faster on any 1080ti.

Not the same. Run that on asus FE with the fans on auto.

There are several designs. Supercloked factory, different coolers.

I have EVGAs sc2. Those can do 760 each with small tweaking.

Check your average pool hashrate instead of what the miner shows.

NoOneLt

member

Activity: 140

Merit: 10

Quote from: tlaskows on January 30, 2018, 07:52:57 AM

Those are not stock clocks for reference design super hot FE.

I can get 2900 easily with power limiting at - 13 and a bit of OC.

So what, its same 1080ti's on different miners... You stated that EWBF is faster, its not at least on my hardware.

tlaskows

full member

Activity: 564

Merit: 100

Join GANTECH’s team of game changers

Those are not stock clocks for reference design super hot FE.

I can get 2900 easily with power limiting at - 13 and a bit of
OC.

I can't use that evga utility. I have mixed brands.

Afterburner is the same thing. Detects the cards default clocks no problem.

NoOneLt

member

Activity: 140

Merit: 10

Quote from: tlaskows on January 30, 2018, 06:35:34 AM

The fastest miner for 1080tis is still EWBF.

On stock FE, it gets < 700.

It depends on the cards.

superclocked card can do 720 stock and run at 60 degrees. FE runs at > 71 degrees no matter what.

I have 4 of them on a cold cement floor spaced out with long adapters.

For me DSTM is faster, here is some quick test on stock settings:

tlaskows

full member

Activity: 564

Merit: 100

Join GANTECH’s team of game changers

The fastest miner for 1080tis is still EWBF.

On stock FE, it gets < 700.

It depends on the cards.

superclocked card can do 720 stock and run at 60 degrees. FE runs at > 71 degrees no matter what.

I have 4 of them on a cold cement floor spaced out with long adapters.

Blockpusher

newbie

Activity: 21

Merit: 0

Quote from: topteam on January 29, 2018, 02:59:50 PM

how can i change white telemetry theme to dark?

Hey Topteam.
You can try this Chrome addon: https://chrome.google.com/webstore/detail/dark-reader/eimadpbcbfnmbkopoojfekhnkhdbieeh

NoOneLt

member

Activity: 140

Merit: 10

Quote from: hikarinokitsune on January 30, 2018, 02:16:27 AM

What I would love to know.... is how to disable a GPU... For whatever reason, this miner just never starts. It keeps saying that "GPU 1" is unresponsive... I'd love to at least TRY this miner on my 1070ti but can't do so if it won't even let me disable a GPU that isn't working with it... and no, I'm not just removing the card... the computer the cards are in is the computer i'm using to type this message.... as in, i use the computer and it just mines when its idle..... or at least would if this worked....

Use --dev switch check help on how to use it.

lamouser

newbie

Activity: 8

Merit: 0

Hi all, my miner zm 0.5.7 at now.Worked steadily for 2 months, recently started to fail. Version 0.5.8 and 5.6 also closed with this error. Has anyone found a solution?
2018-01-30 1:32:43|gpu_id 7 51 3 unspecified launch failure
2018-01-30 1:32:43|gpu 7 unresponsive - check overclocking
2018-01-30 1:32:43|gpu_id 2 67 0 unspecified launch failure
2018-01-30 1:32:43|cudaMemcpy 1 failed
2018-01-30 1:32:43|gpu_id 5 66 0 unspecified launch failure
2018-01-30 1:32:43|gpu 5 unresponsive - check overclocking
2018-01-30 1:32:43|cudaMemcpy 2 failed
2018-01-30 1:32:43|cudaMemcpy 1 failed
2018-01-30 1:32:43|gpu 2 unresponsive - check overclocking
2018-01-30 1:32:43|cudaMemcpy 1 failed

hikarinokitsune

newbie

Activity: 1

Merit: 0

What I would love to know.... is how to disable a GPU... For whatever reason, this miner just never starts. It keeps saying that "GPU 1" is unresponsive... I'd love to at least TRY this miner on my 1070ti but can't do so if it won't even let me disable a GPU that isn't working with it... and no, I'm not just removing the card... the computer the cards are in is the computer i'm using to type this message.... as in, i use the computer and it just mines when its idle..... or at least would if this worked....

weeminer

newbie

Activity: 7

Merit: 0

Quote from: weeminer on January 29, 2018, 10:59:10 AM

Quote from: siforek on January 26, 2018, 04:23:46 PM

Quote from: dstm on January 25, 2018, 10:05:20 AM

Quote from: siforek on January 23, 2018, 08:03:25 PM

Quote from: betopica on January 23, 2018, 07:17:59 PM

Quote from: siforek on January 23, 2018, 05:41:35 PM

I tried switching from ewbf to dstm for the 2nd time yesterday. Initially it started out 5-10% faster than ewbf which is awesome, however after about 10-15 minutes it slowed more & more to the point where it was as much as 40% slower than ewbf, at which point I switched back.
I've talked to others that do not have the same problem, yet they were running less GPUs than I am. I have multiple rigs with 13x1070s & 1070tis.

I have the same problem with DSTM 0.5.6, 0.5.7 and 0.5.8. Stable and fast as hell, but after one hour it starts to make less and less sol/s.. in three hours I'm getting half rate (I start with 680-700 sol/s and after 4 hours I end with 230 sol/s)... so my only solution is restart the miner. All the time no more than 60ºC, fan speed at 60%. I have two rigs, same specs and the same problem: Asrock H110 PRO + 13 Nvidia 1080Ti (up five different brands, mixed). Every rig have 4 PSUs: 3 x 1000W + 1 x 1600W and just one cable to power every riser (4 pin molex version) so no problems about power or temperature. I use simplemining without overclock, just power at 200W, no extra mhz in gpu core or memory. Is it a configuration problem?

Yep same motherboard, never had this issue with any other miner but I'd love to get it working & get the extra sols. Anyone else have any ideas?

Are you all using SMOS?
Some SMOS user reported something similar recently.
https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765

If you take a look at the provided data: affected systems seems to have a lot 'nvidia-settings' processes running, this might be the reason for the performance drop after some time. So pls check if this is also the case on your system - It looks like SMOS is starting nvidia-setting (most likely for monitoring) without properly closing it.

Having this issue & yes, on SMOS. Would just replace SMOS with Ubuntu if I could but only have remote access to rigs. Might need to mod SMOS source to fix :/

I am also having this issue..running with smos. With 12 x gtx1060..rig started with 3700sol/s..after running for 2 hours the hash rate drop to 2000sol/s. Is there anyway we can fix this in smos ? I tried both 0.5.7 and 0.5.8 same result..Now trying 0.5.6 version

I guys..I am running v0.5.6 in smos with 12x gtx1060..Somehow manage to get it stable running around 3700sol/s for 12hours..No decrease in hashrate so far...I assume it's stable right now compare to v0.5.7 and v0.5.8 in smos..this might be the resolution for those having similar issue

topteam

newbie

Activity: 157

Merit: 0

how can i change white telemetry theme to dark?

vovanius

newbie

Activity: 26

Merit: 0

Are there any intensity settings? Like --intensity in EWBF miner?

Jughead1220

newbie

Activity: 3

Merit: 0

I tried working theis with conjunction of cdm open source.. https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm-ccminer/20640/123 ... on Zen cash in suprnova pool and i cant get it to work.Keeps saying something wrobg with the net.. I think its users noobs error 😂😂.. .. it works in zcash in flypool.... ... I hope Dstm can place this similar scripts and can use it in both zcash and zencash both in suprnova and flypool...

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Hey dtsm, how's the new version coming ? any approx ETA ? Will it be available in cuda 9.1 ?

keep up the good work !

weeminer

newbie

Activity: 7

Merit: 0

Quote from: siforek on January 26, 2018, 04:23:46 PM

Quote from: dstm on January 25, 2018, 10:05:20 AM

Quote from: siforek on January 23, 2018, 08:03:25 PM

Quote from: betopica on January 23, 2018, 07:17:59 PM

Quote from: siforek on January 23, 2018, 05:41:35 PM

I tried switching from ewbf to dstm for the 2nd time yesterday. Initially it started out 5-10% faster than ewbf which is awesome, however after about 10-15 minutes it slowed more & more to the point where it was as much as 40% slower than ewbf, at which point I switched back.
I've talked to others that do not have the same problem, yet they were running less GPUs than I am. I have multiple rigs with 13x1070s & 1070tis.

I have the same problem with DSTM 0.5.6, 0.5.7 and 0.5.8. Stable and fast as hell, but after one hour it starts to make less and less sol/s.. in three hours I'm getting half rate (I start with 680-700 sol/s and after 4 hours I end with 230 sol/s)... so my only solution is restart the miner. All the time no more than 60ºC, fan speed at 60%. I have two rigs, same specs and the same problem: Asrock H110 PRO + 13 Nvidia 1080Ti (up five different brands, mixed). Every rig have 4 PSUs: 3 x 1000W + 1 x 1600W and just one cable to power every riser (4 pin molex version) so no problems about power or temperature. I use simplemining without overclock, just power at 200W, no extra mhz in gpu core or memory. Is it a configuration problem?

Yep same motherboard, never had this issue with any other miner but I'd love to get it working & get the extra sols. Anyone else have any ideas?

Are you all using SMOS?
Some SMOS user reported something similar recently.
https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765

If you take a look at the provided data: affected systems seems to have a lot 'nvidia-settings' processes running, this might be the reason for the performance drop after some time. So pls check if this is also the case on your system - It looks like SMOS is starting nvidia-setting (most likely for monitoring) without properly closing it.

Having this issue & yes, on SMOS. Would just replace SMOS with Ubuntu if I could but only have remote access to rigs. Might need to mod SMOS source to fix :/

I am also having this issue..running with smos. With 12 x gtx1060..rig started with 3700sol/s..after running for 2 hours the hash rate drop to 2000sol/s. Is there anyway we can fix this in smos ? I tried both 0.5.7 and 0.5.8 same result..Now trying 0.5.6 version

Gelbstich

hero member

Activity: 562

Merit: 509

AVG shows me zm.exe as a virus and versions 0.5.6 - 0.5.8 for Win64 in the opening post DO NOT MATCH the given sha1 hash number. Can anyone else confirm this please?

Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 47. (Read 224961 times)