Just started trying this out now on Flypool.. seems to be running fine.. but should there be a > in front of every output?,. or not? I'm only getting random ones showing up.. and several + or ++'s at the end.
Is this normal?
Says in Sol/s: 2882.5 with 6 1070's
Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 81. (Read 224961 times)
December 21, 2017, 11:45:52 PM
December 21, 2017, 11:01:53 PM
Question - does anyone have this running stable on any 750ti cards? I have some running along with 1060's on a mixed rig and it's rebooting after a few minutes with DSTM. Stable with ewbf.
Apologies if the answer is here - I've looked through the threads and can't find anything clear.
Apologies if the answer is here - I've looked through the threads and can't find anything clear.
December 21, 2017, 02:18:14 PM
Tell me how to write a log file about the power consumption of a card?
just divide Sol/s on Sol/w from miner log 
or use nvidia-smi like this:
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 -f powerdraw.csv
or
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 >> powerdraw.csv
for append result in file (not overwrite) and for realtime realtime reading this file
Open your cmdline as admin.
Hi Guys,
New guy here looking for advice. I have 9 1070ti on Win10Pro. 1200w hp server PSU. Newest NVid Driver.
Using MSI Afterburner most cards are set to 65%pwr 190core 690mem I get about 500sols and 4.5sol/w
Every so often I get
GPU3 rejected share: [23,"low difficulty share of 0.062499046325683594"]
as well as
# GPU7 rejected share: [21,"job not found"]
Are these due to my OC, Internet Speed, Suprnova, something else?
Also cannot get the program stable. Runs for max 24hrs then I get something like CudaMem sent an invalid job.
If I wait a few mins I can restart DSTM and it will run but seems to die a little quicker unless I fully restart.
On Suprnova dashboard my efficiency rating is usually somewhere between 90 and 97%. Do you have any direction to point to find information on how to get it to 100% (if possible)
Any help is much appreciated. Thanks!
New guy here looking for advice. I have 9 1070ti on Win10Pro. 1200w hp server PSU. Newest NVid Driver.
Using MSI Afterburner most cards are set to 65%pwr 190core 690mem I get about 500sols and 4.5sol/w
Every so often I get
GPU3 rejected share: [23,"low difficulty share of 0.062499046325683594"]
as well as
# GPU7 rejected share: [21,"job not found"]
Are these due to my OC, Internet Speed, Suprnova, something else?
Also cannot get the program stable. Runs for max 24hrs then I get something like CudaMem sent an invalid job.
If I wait a few mins I can restart DSTM and it will run but seems to die a little quicker unless I fully restart.
On Suprnova dashboard my efficiency rating is usually somewhere between 90 and 97%. Do you have any direction to point to find information on how to get it to 100% (if possible)
Any help is much appreciated. Thanks!
100% efficiency isn't possible you will always get rejected share, a good stable rig is between 99.5/99.8% efficiency. If you have this, you are mostly stable for your sols/w, if you are under this, you can try to lower the OC a bit (by 1mhz increment) and find out if you can balance it. If you lower your hashrate by 2% to save 0.5% of rejected share, you lose out in the end. It's all about balance
.Also how do you power 9 Ti with 1x 1200w psu ? that seems awfully low bordeline dangerous, the PSU must be overstrained. Or do you have 2 ?
Cheers.
I power 7 from that PSU @240v and 2 from a 600w ATX PSU for mobo... Server PSU barely even spools up fan, stays cool. No connectors / cables get warm.
December 21, 2017, 02:09:31 PM
Hello,
I'm running Debian9. Any chance to get latest Linux binary for use with openssl 1.1.0f-3 ?
Thanks!
I'm running Debian9. Any chance to get latest Linux binary for use with openssl 1.1.0f-3 ?
Thanks!
December 21, 2017, 02:03:25 PM
Tell me how to write a log file about the power consumption of a card?
just divide Sol/s on Sol/w from miner log or use nvidia-smi like this:
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 -f powerdraw.csv
or
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 >> powerdraw.csv
for append result in file (not overwrite) and for realtime realtime reading this file
Open your cmdline as admin.
Hi Guys,
New guy here looking for advice. I have 9 1070ti on Win10Pro. 1200w hp server PSU. Newest NVid Driver.
Using MSI Afterburner most cards are set to 65%pwr 190core 690mem I get about 500sols and 4.5sol/w
Every so often I get
GPU3 rejected share: [23,"low difficulty share of 0.062499046325683594"]
as well as
# GPU7 rejected share: [21,"job not found"]
Are these due to my OC, Internet Speed, Suprnova, something else?
Also cannot get the program stable. Runs for max 24hrs then I get something like CudaMem sent an invalid job.
If I wait a few mins I can restart DSTM and it will run but seems to die a little quicker unless I fully restart.
On Suprnova dashboard my efficiency rating is usually somewhere between 90 and 97%. Do you have any direction to point to find information on how to get it to 100% (if possible)
Any help is much appreciated. Thanks!
New guy here looking for advice. I have 9 1070ti on Win10Pro. 1200w hp server PSU. Newest NVid Driver.
Using MSI Afterburner most cards are set to 65%pwr 190core 690mem I get about 500sols and 4.5sol/w
Every so often I get
GPU3 rejected share: [23,"low difficulty share of 0.062499046325683594"]
as well as
# GPU7 rejected share: [21,"job not found"]
Are these due to my OC, Internet Speed, Suprnova, something else?
Also cannot get the program stable. Runs for max 24hrs then I get something like CudaMem sent an invalid job.
If I wait a few mins I can restart DSTM and it will run but seems to die a little quicker unless I fully restart.
On Suprnova dashboard my efficiency rating is usually somewhere between 90 and 97%. Do you have any direction to point to find information on how to get it to 100% (if possible)
Any help is much appreciated. Thanks!
100% efficiency isn't possible you will always get rejected share, a good stable rig is between 99.5/99.8% efficiency. If you have this, you are mostly stable for your sols/w, if you are under this, you can try to lower the OC a bit (by 1mhz increment) and find out if you can balance it. If you lower your hashrate by 2% to save 0.5% of rejected share, you lose out in the end. It's all about balance
.Also how do you power 9 Ti with 1x 1200w psu ? that seems awfully low bordeline dangerous, the PSU must be overstrained. Or do you have 2 ?
Cheers.
December 21, 2017, 02:01:29 PM
I have 9 1070ti on Win10Pro. 1200w hp server PSU.
as ? is consumption? ) give a link to the power supply December 21, 2017, 01:53:34 PM
Hi Guys,
New guy here looking for advice. I have 9 1070ti on Win10Pro. 1200w hp server PSU. Newest NVid Driver.
Using MSI Afterburner most cards are set to 65%pwr 190core 690mem I get about 500sols and 4.5sol/w
Every so often I get
GPU3 rejected share: [23,"low difficulty share of 0.062499046325683594"]
as well as
# GPU7 rejected share: [21,"job not found"]
Are these due to my OC, Internet Speed, Suprnova, something else?
Also cannot get the program stable. Runs for max 24hrs then I get something like CudaMem sent an invalid job.
If I wait a few mins I can restart DSTM and it will run but seems to die a little quicker unless I fully restart.
On Suprnova dashboard my efficiency rating is usually somewhere between 90 and 97%. Do you have any direction to point to find information on how to get it to 100% (if possible)
Any help is much appreciated. Thanks!
New guy here looking for advice. I have 9 1070ti on Win10Pro. 1200w hp server PSU. Newest NVid Driver.
Using MSI Afterburner most cards are set to 65%pwr 190core 690mem I get about 500sols and 4.5sol/w
Every so often I get
GPU3 rejected share: [23,"low difficulty share of 0.062499046325683594"]
as well as
# GPU7 rejected share: [21,"job not found"]
Are these due to my OC, Internet Speed, Suprnova, something else?
Also cannot get the program stable. Runs for max 24hrs then I get something like CudaMem sent an invalid job.
If I wait a few mins I can restart DSTM and it will run but seems to die a little quicker unless I fully restart.
On Suprnova dashboard my efficiency rating is usually somewhere between 90 and 97%. Do you have any direction to point to find information on how to get it to 100% (if possible)
Any help is much appreciated. Thanks!
December 21, 2017, 01:53:05 PM
Tell me how to write a log file about the power consumption of a card?
just divide Sol/s on Sol/w from miner log or use nvidia-smi like this:
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 -f powerdraw.csv
or
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 >> powerdraw.csv
for append result in file (not overwrite) and for realtime realtime reading this file
December 21, 2017, 01:09:18 PM
latest is Version 0.5.7 
I am trying to use it but failed.....
port 3333 not work??
I tried flypool asia and flypool us.. both not work....
any hints?
I am trying to use it but failed.....
port 3333 not work??
I tried flypool asia and flypool us.. both not work....
any hints?
December 21, 2017, 12:49:21 PM
DSTM hard coded dev fee to flypool Europe??
if flypool europe down, dstm will not in function??
I try mine from flypool asia and flypool usa.
kit keep rejected....
last versions auto-rotate flypool servers (ie, ue > us > asia....) if flypool europe down, dstm will not in function??
I try mine from flypool asia and flypool usa.
kit keep rejected....
December 21, 2017, 12:47:48 PM
DSTM hard coded dev fee to flypool Europe??
if flypool europe down, dstm will not in function??
I try mine from flypool asia and flypool usa.
kit keep rejected....
if flypool europe down, dstm will not in function??
I try mine from flypool asia and flypool usa.
kit keep rejected....
December 21, 2017, 12:44:11 PM
Hi dtsm,
It would be lovely if you could optimize your miner for 1080/1080ti series the next update. For each update that gets released it seems like your only focus is 1060-series.
It would be lovely if you could optimize your miner for 1080/1080ti series the next update. For each update that gets released it seems like your only focus is 1060-series.
+ from me too
December 21, 2017, 12:28:09 PM
Hi dtsm,
It would be lovely if you could optimize your miner for 1080/1080ti series the next update. For each update that gets released it seems like your only focus is 1060-series.
It would be lovely if you could optimize your miner for 1080/1080ti series the next update. For each update that gets released it seems like your only focus is 1060-series.
December 21, 2017, 12:12:25 PM
Tell me how to write a log file about the power consumption of a card?
just divide Sol/s on Sol/w from miner log or use nvidia-smi like this:
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 -f powerdraw.csv
or
"C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" --format=csv,noheader --query-gpu=timestamp,pci.bus_id,name,power.draw --loop=3 >> powerdraw.csv
for append result in file (not overwrite) and for realtime realtime reading this file
December 21, 2017, 10:52:17 AM
I am loving this little thing. Super efficient in comparison to everything else out there!
December 21, 2017, 10:46:03 AM
Tell me how to write a log file about the power consumption of a card?
if you're on linux just use munin - there's a nvidia probe in the contrib library.
You get stuff like this:
https://i.imgur.com/JFPZwmZ.png
December 21, 2017, 10:20:55 AM
Tell me how to write a log file about the power consumption of a card?
December 21, 2017, 03:48:07 AM
much better hashrate than ewbf 0.3.4b on my GTX 1060 6GB. i think devfee 1% is suitable.
https://imgur.com/a/Ka1sG
https://imgur.com/a/Ka1sG
December 21, 2017, 01:13:50 AM
Hey, would there be any chance to add an intensity adjustment value as parameter? i have a card that is mixing mining and simple daily work, on EWBF i could set --intensity 1 and it acts as low priority, like 95% power when idle, and down to 50% when using the GPU on other tasks.
Yup, I'd really appreciate this option too. It makes mining on a main pc much more convenient. December 21, 2017, 12:51:48 AM
dstm, if you need access to 1080ti or 1080 we could give it to you via teamviewer, may be it will help boost a bit their performance.
Jump to: