pruned some of the nodes that were no longer responding, clients shut down. And we got some new friends synced up.
NOTE - do not use these if you are on the other chains, you will have issues with your client, as will these that you are connecting to. You need to delete all that is in your %appdata%\fluttercoin (except wallet.dat).
Create fluttercoin.conf and start qt, I'm testing it from scratch at the moment, I synced earlier just looking for nodes, and got the wrong chain, yeah! BOO HISS!
I modified this so I could solo mine to add some additional hashrate, and some block traffic...also I changed listen=0 so it doesn't accept outside connections while you sync. I just had an issue where I saw a bad chain in my peer list. monitoring it...
connect=54.203.244.170
connect=54.203.244.27
connect=54.199.237.235
connect=98.220.203.77
connect=76.177.91.53
connect=71.61.60.138
connect=192.99.159.64
connect=209.124.227.24
connect=70.70.239.50
connect=107.170.172.93
connect=66.11.162.228
connect=192.3.177.246
connect=98.193.106.107
connect=69.59.38.87
connect=86.212.55.167
connect=173.192.30.91
connect=178.203.9.140
connect=213.214.63.127
connect=65.6.105.7
server=1
rpcuser=ofeefee
rpcpassword=x
listen=0
noirc=1
rpcallowip=192.168.1.*
oh and it's not fluttercoin, but this wiki is nice, has descriptions of what different things do in your conf file.
https://en.bitcoin.it/wiki/Running_Bitcoin**confirmed** full sync without any other nodes jumping in to mess it up.
After you do sync up- Change connect to addnode
- Change listen=0 to listen=1
It could cause your client to lock up if a bad peer connects, but if you aren't doing anything but letting it run, at least someone can connect to you to download. Can always kill it, change to connect=, listen=0 to do whatever, then switch it back on as needed.
update -
Tested sending 100 from bittrex to mintpal and Cryptsy. I received it at Cryptsy, nothing at mintpal yet.
update -
i checked my client at home, didn't have time this morning to check it. Using the config above is still keeping me in sync, solo mining is producing some blocks, which helps the network process blocks properly.
update -
test some from my wallet to three exchanges
19.99 -> wallet -> bittrex - confirmed
19.99 -> wallet -> cryptsy - confirmed
19.99 -> wallet -> mintpal - nothing yet
There's 14MHs (update 17MHs now) on the network at the moment, I have about 2MHs hashing, heating it up in da house! If you are mining be wary that you do not produce over 50% of the hashrate or we risk forking the good chain into yet more chains
Update - 6/24 11:38cst
opened a ticket with Mintpal to ask they check their wallet, transids I sent, confirmed by official explorer.flutterchain.us
my transids that were sent to mintpal
bittrex -> mintpal -> 100.00
e2ed845b8ddda07830899e2a1f808227eafc633ee8c8557eaba7fc2c6d6e0556
wallet -> mintpal -> 19.99
42ce231b22b496e23de3c8423c5f893b6f62c41bf4be38eddecf8de17ea0af4d