Code:
2017-Sep-01 21:13:30.874389 ERROR Error: Internal node error
how to fix?
Topic: [ANN] Forknote - create your own Cryptonote network - page 8. (Read 36736 times)
can not send coins
how to fix?
how to fix?
Thanks slb!. It works! now it is syncing.
Hello dear members. Is there an active peer/seed node for bitcoal?.
Both bitcoal and forknoted seems to be down every seed node; however there is a pool Democats who is actually having a pool on that coin.
Thanks.-
seed-node=108.61.188.93:7700Both bitcoal and forknoted seems to be down every seed node; however there is a pool Democats who is actually having a pool on that coin.
Thanks.-
seed-node=78.47.186.74:7700
Hello dear members. Is there an active peer/seed node for bitcoal?.
Both bitcoal and forknoted seems to be down every seed node; however there is a pool Democats who is actually having a pool on that coin.
Thanks.-
Both bitcoal and forknoted seems to be down every seed node; however there is a pool Democats who is actually having a pool on that coin.
Thanks.-
Thanks a lot!
VERSION 2.1.0 just released @ Github - https://github.com/forknote/forknote/releases/tag/2.1.0
Changes:
Core changed to Bytecoin 2.1.0
Extended support for Zawi Difficulty Algorithm
Bug fixes
Binaries will be compiled very soon
Changes:
Core changed to Bytecoin 2.1.0
Extended support for Zawi Difficulty Algorithm
Bug fixes
Binaries will be compiled very soon
Binaries:
https://github.com/forknote/forknote/releases/tag/2.1.0
VERSION 2.1.0 just released @ Github - https://github.com/forknote/forknote/releases/tag/2.1.0
Changes:
Core changed to Bytecoin 2.1.0
Extended support for Zawi Difficulty Algorithm
Bug fixes
Binaries will be compiled very soon
Changes:
Core changed to Bytecoin 2.1.0
Extended support for Zawi Difficulty Algorithm
Bug fixes
Binaries will be compiled very soon
Hi All!
I could really use some help here... I've been trying for days to generate a correct genesis block reward for a new blockchain without much success...
I can generate the GENESIS_COINBASE_TX_HEX and I include it in the config file. I can also mine the first block in the wallet which I've set to print the genesis block.
However, when I try to transfer any amount from this wallet I get Transaction ........ is not valid. Reason: Transaction has input with invalid signature and TX verification failed. The amount never gets out of the local pool, to other nodes or daemons.
If I restart the daemon and reset the wallets the amount is unlocked and I can see it again in available balance but it never reaches the destination wallet.
Also, there seems to be another problem with the transactions. If I have a wallet (not the genesis block wallet) into which I have mined a n amount of coins, whenever I make a transaction to another wallet, the daemons throw a warning:
Transaction ....... is not valid. Reason: Transaction uses spent key image. However... the transaction goes through in the end and the receiving wallet actually receives the coins.
If anyone could help with this, I would really appreciate it.
Thank you,
Cosmin
I could really use some help here... I've been trying for days to generate a correct genesis block reward for a new blockchain without much success...
I can generate the GENESIS_COINBASE_TX_HEX and I include it in the config file. I can also mine the first block in the wallet which I've set to print the genesis block.
However, when I try to transfer any amount from this wallet I get Transaction ........ is not valid. Reason: Transaction has input with invalid signature and TX verification failed. The amount never gets out of the local pool, to other nodes or daemons.
If I restart the daemon and reset the wallets the amount is unlocked and I can see it again in available balance but it never reaches the destination wallet.
Also, there seems to be another problem with the transactions. If I have a wallet (not the genesis block wallet) into which I have mined a n amount of coins, whenever I make a transaction to another wallet, the daemons throw a warning:
Transaction ....... is not valid. Reason: Transaction uses spent key image. However... the transaction goes through in the end and the receiving wallet actually receives the coins.
If anyone could help with this, I would really appreciate it.
Thank you,
Cosmin
How to get the first Genesis block reward?
I have configured (Percentage of premined coins) 10% but when mining it was unsuccessful.
I have tried many times and failed, please help me.
I have configured (Percentage of premined coins) 10% but when mining it was unsuccessful.
I have tried many times and failed, please help me.
Thanks for an update!
New Forknote version released (v2.0.6.1):
https://github.com/forknote/forknote/releases/tag/2.0.6.1
Changes in this version:
Bug fixes
https://github.com/forknote/forknote/releases/tag/2.0.6.1
Changes in this version:
Bug fixes
i have create a new coin from forknote generator
2017-Jul-22 08:42:00.852658 WARNING Checkpoint block hash mismatch for block 655255584deceb8a1aa1be41b42c89bc891bbb5632b5abc43bfc4c8a197ae012
2017-Jul-22 08:42:04.932268 WARNING CHECKPOINT FAILED FOR HEIGHT 79000. EXPECTED HASH: cae33204e624faeb64938d80073bb7bbacc27017dc63f36c5c0f313cad455a02, FETCHED HASH: 265919798af0bc54175053aa632858dc009e7719c558a397bd34a35e51039224
Now after a few months I get this error.
Can anyone help me solve it?
Thanks
2017-Jul-22 08:42:00.852658 WARNING Checkpoint block hash mismatch for block 655255584deceb8a1aa1be41b42c89bc891bbb5632b5abc43bfc4c8a197ae012
2017-Jul-22 08:42:04.932268 WARNING CHECKPOINT FAILED FOR HEIGHT 79000. EXPECTED HASH: cae33204e624faeb64938d80073bb7bbacc27017dc63f36c5c0f313cad455a02, FETCHED HASH: 265919798af0bc54175053aa632858dc009e7719c558a397bd34a35e51039224
Now after a few months I get this error.
Can anyone help me solve it?
Thanks
Add a checkpoint
i have create a new coin from forknote generator
2017-Jul-22 08:42:00.852658 WARNING Checkpoint block hash mismatch for block 655255584deceb8a1aa1be41b42c89bc891bbb5632b5abc43bfc4c8a197ae012
2017-Jul-22 08:42:04.932268 WARNING CHECKPOINT FAILED FOR HEIGHT 79000. EXPECTED HASH: cae33204e624faeb64938d80073bb7bbacc27017dc63f36c5c0f313cad455a02, FETCHED HASH: 265919798af0bc54175053aa632858dc009e7719c558a397bd34a35e51039224
Now after a few months I get this error.
Can anyone help me solve it?
Thanks
2017-Jul-22 08:42:00.852658 WARNING Checkpoint block hash mismatch for block 655255584deceb8a1aa1be41b42c89bc891bbb5632b5abc43bfc4c8a197ae012
2017-Jul-22 08:42:04.932268 WARNING CHECKPOINT FAILED FOR HEIGHT 79000. EXPECTED HASH: cae33204e624faeb64938d80073bb7bbacc27017dc63f36c5c0f313cad455a02, FETCHED HASH: 265919798af0bc54175053aa632858dc009e7719c558a397bd34a35e51039224
Now after a few months I get this error.
Can anyone help me solve it?
Thanks
non problems at all.
just use different folders to keep different coins separated and use .bat file and settings file parameters to use one of them - like below:
--config-file C:\BIN\BIT\QCN\qcn.ini --data-dir B:\BLOCKS\QCN --log-file B:\BLOCKS\qcnd.log
and/or
log-file=B:\BLOCKS\qcnd.log
just use different folders to keep different coins separated and use .bat file and settings file parameters to use one of them - like below:
--config-file C:\BIN\BIT\QCN\qcn.ini --data-dir B:\BLOCKS\QCN --log-file B:\BLOCKS\qcnd.log
and/or
log-file=B:\BLOCKS\qcnd.log
Is it possible to run two different Forknote coins on the same VPS?
If so, how do you recommend doing it?
Thanks!
You can run as many as you like. You just must have different p2p and rpc ports on all configs If so, how do you recommend doing it?
Thanks!
Is it possible to run two different Forknote coins on the same VPS?
If so, how do you recommend doing it?
Thanks!
If so, how do you recommend doing it?
Thanks!
I think I managed to create it.
I have 2 seeding nodes.
I run ./forknoted --config-file configs/one.conf on both of them
This is the config file which is on both of the nodes
This is the result
https://i.imgur.com/VlnhNOg.png
Is it Ok so far?
I created a wallet file
https://i.imgur.com/iGjtleB.png
What is next? How do I start mining? I used this command but nothing is happen
https://i.imgur.com/X3vdaP7.png
I have 2 seeding nodes.
I run ./forknoted --config-file configs/one.conf on both of them
This is the config file which is on both of the nodes
Quote
seed-node=13.78.180.70:38584
seed-node=52.161.22.53:22241
EMISSION_SPEED_FACTOR=18
DIFFICULTY_TARGET=120
CRYPTONOTE_DISPLAY_DECIMAL_POINT=6
MONEY_SUPPLY=1844674407370955
GENESIS_BLOCK_REWARD=0
DEFAULT_DUST_THRESHOLD=100
MINIMUM_FEE=100
CRYPTONOTE_MINED_MONEY_UNLOCK_WINDOW=10
CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE=100000
CRYPTONOTE_PUBLIC_ADDRESS_BASE58_PREFIX=55
p2p-bind-port=38584
rpc-bind-port=38585
BYTECOIN_NETWORK=0bf5a860-c4bb-97e1-2b5a-c29af5727377
CRYPTONOTE_NAME=one
GENESIS_COINBASE_TX_HEX=010a01ff0001b1ddb89b1a029b2e4c0281c0b02e7c53291a94d1d0cbff8883f8024f5142ee494ffbbd088071210184a550f80905e24c3deea73f83aba94717846eff32973ca64e03ff79c6079789
MAX_BLOCK_SIZE_INITIAL=100000
UPGRADE_HEIGHT_V2=1
UPGRADE_HEIGHT_V3=2
seed-node=52.161.22.53:22241
EMISSION_SPEED_FACTOR=18
DIFFICULTY_TARGET=120
CRYPTONOTE_DISPLAY_DECIMAL_POINT=6
MONEY_SUPPLY=1844674407370955
GENESIS_BLOCK_REWARD=0
DEFAULT_DUST_THRESHOLD=100
MINIMUM_FEE=100
CRYPTONOTE_MINED_MONEY_UNLOCK_WINDOW=10
CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE=100000
CRYPTONOTE_PUBLIC_ADDRESS_BASE58_PREFIX=55
p2p-bind-port=38584
rpc-bind-port=38585
BYTECOIN_NETWORK=0bf5a860-c4bb-97e1-2b5a-c29af5727377
CRYPTONOTE_NAME=one
GENESIS_COINBASE_TX_HEX=010a01ff0001b1ddb89b1a029b2e4c0281c0b02e7c53291a94d1d0cbff8883f8024f5142ee494ffbbd088071210184a550f80905e24c3deea73f83aba94717846eff32973ca64e03ff79c6079789
MAX_BLOCK_SIZE_INITIAL=100000
UPGRADE_HEIGHT_V2=1
UPGRADE_HEIGHT_V3=2
This is the result
https://i.imgur.com/VlnhNOg.png
Is it Ok so far?
I created a wallet file
https://i.imgur.com/iGjtleB.png
What is next? How do I start mining? I used this command but nothing is happen
https://i.imgur.com/X3vdaP7.png
slb thanks. I am willing to create a help (and youtube video tutorial) but first I have to figure out for myself
So please, tell me:
1. Is mandatory to have 2 seeding nodes? If YES, the config file should contain both seeding nodes IPs?
2. Genesis coinbase transaction hex. When creating config file using the form from your website, I see that a genesis hex is generated. If I later run ./forknoted --config-file configs/imaginary_blockchain.conf --print-genesis-tx, a new genesis hex will be generated. Should I replace it in the config file? Or can I leave the genesis hex genereted before (by your website form) ?
I wrote a small tutorial file with I belive is nedeed to create own coin. The tutorial is here https://pastebin.com/TRsDzy2u
I am not sure if it is correct. Thanks!
So please, tell me:
1. Is mandatory to have 2 seeding nodes? If YES, the config file should contain both seeding nodes IPs?
2. Genesis coinbase transaction hex. When creating config file using the form from your website, I see that a genesis hex is generated. If I later run ./forknoted --config-file configs/imaginary_blockchain.conf --print-genesis-tx, a new genesis hex will be generated. Should I replace it in the config file? Or can I leave the genesis hex genereted before (by your website form) ?
I wrote a small tutorial file with I belive is nedeed to create own coin. The tutorial is here https://pastebin.com/TRsDzy2u
I am not sure if it is correct. Thanks!
It seams correct.
You need 2 nodes and both of them in the config file
If you do not change parameters or premined address there is no need to change the genesis tx hex
slb thanks. I am willing to create a help (and youtube video tutorial) but first I have to figure out for myself
So please, tell me:
1. Is mandatory to have 2 seeding nodes? If YES, the config file should contain both seeding nodes IPs?
2. Genesis coinbase transaction hex. When creating config file using the form from your website, I see that a genesis hex is generated. If I later run ./forknoted --config-file configs/imaginary_blockchain.conf --print-genesis-tx, a new genesis hex will be generated. Should I replace it in the config file? Or can I leave the genesis hex genereted before (by your website form) ?
I wrote a small tutorial file with I belive is nedeed to create own coin. The tutorial is here https://pastebin.com/TRsDzy2u
I am not sure if it is correct. Thanks!
So please, tell me:
1. Is mandatory to have 2 seeding nodes? If YES, the config file should contain both seeding nodes IPs?
2. Genesis coinbase transaction hex. When creating config file using the form from your website, I see that a genesis hex is generated. If I later run ./forknoted --config-file configs/imaginary_blockchain.conf --print-genesis-tx, a new genesis hex will be generated. Should I replace it in the config file? Or can I leave the genesis hex genereted before (by your website form) ?
I wrote a small tutorial file with I belive is nedeed to create own coin. The tutorial is here https://pastebin.com/TRsDzy2u
I am not sure if it is correct. Thanks!
Thanks for your previous and acurate answer. I have just created a testing coin. I guess I am at the last step - sync with network.
When running ./forknoted --config-file configs/my.conf i get this:
Sync data returned unknown top block: 227650 -> 1294061 [1066411 blocks (1481 days) behind]
Why the sync is so behind for a new coin? Is there a faster way to sync?
When running ./forknoted --config-file configs/my.conf i get this:
Sync data returned unknown top block: 227650 -> 1294061 [1066411 blocks (1481 days) behind]
Why the sync is so behind for a new coin? Is there a faster way to sync?
You need to add your own nodes
Jump to: