Topic: [ANN] [GLB]Globe – One Currency for One Globe - Polished and Ready for Action - page 67. (Read 113608 times)
December 06, 2013, 04:55:17 PM
how is it looking now
December 06, 2013, 04:53:01 PM
My wallet appears to be working and my conf file is fine but my hashespersec=0 and according to getpeerinfo no one else is connected. getmininginfo says that it is on block 0 and difficulty=1
any ideas on what I'm doing wrong? maybe we need to add more nodes?
any ideas on what I'm doing wrong? maybe we need to add more nodes?
close the binary add following lines if not done so already:
addnode=81.107.45.67
rpcport=8682
can you give us your cgminer or bfgminer .conf sample please?
I'm just using the wallet, not cgminer
December 06, 2013, 04:51:50 PM
doesnt seem to maintain a connection to the node, need more nodes!
this is a temp node add:
31.55.44.123
December 06, 2013, 04:51:34 PM
My wallet appears to be working and my conf file is fine but my hashespersec=0 and according to getpeerinfo no one else is connected. getmininginfo says that it is on block 0 and difficulty=1
any ideas on what I'm doing wrong? maybe we need to add more nodes?
any ideas on what I'm doing wrong? maybe we need to add more nodes?
close the binary add following lines if not done so already:
addnode=81.107.45.67
rpcport=8682
can you give us your cgminer or bfgminer .conf sample please?
I'm just using the wallet, not cgminer
December 06, 2013, 04:51:14 PM
well i don't have any connections right now
i only added the node what you posted. btw am able to globed getinfo now
i only added the node what you posted. btw am able to globed getinfo now
no problem
to make sure you have a connection close the binary (you can keep cmd up) and add the following line to globe.conf:addnode=81.107.45.67
also make sure you set the rpc port as shown:
rpcport=8682
December 06, 2013, 04:49:54 PM
doesnt seem to maintain a connection to the node, need more nodes!
December 06, 2013, 04:49:42 PM
If not done so add the following:
rpcport=8682
addnode=81.107.45.67
rpcport=8682
addnode=81.107.45.67
December 06, 2013, 04:49:01 PM
can someone tell me how many blocks are mined already (around 50 minutes after launch)
nothing right now December 06, 2013, 04:48:36 PM
My wallet appears to be working and my conf file is fine but my hashespersec=0 and according to getpeerinfo no one else is connected. getmininginfo says that it is on block 0 and difficulty=1
any ideas on what I'm doing wrong? maybe we need to add more nodes?
any ideas on what I'm doing wrong? maybe we need to add more nodes?
close the binary add following lines if not done so already:
addnode=81.107.45.67
rpcport=8682
can you give us your cgminer or bfgminer .conf sample please?
December 06, 2013, 04:47:49 PM
pitops you can open a new cmd prompt and use it like a normal wallet. Once the blank binary is running open a new cmd navigate to the location of your binary once in the same folder type the name of the file in this case globed followed by a command: e.g. globed getinfo Here are a list of all the commands : https://en.bitcoin.it/wiki/API_reference_(JSON-RPC). Some useful ones:
getinfo: gets you data on coin number of blocks connections etc
getmininginfo: gets you mining data hashes per secound etc
getnewaddress: gets yourself a new globe address
setgenerate true 16: starts mining Globe
getinfo: gets you data on coin number of blocks connections etc
getmininginfo: gets you mining data hashes per secound etc
getnewaddress: gets yourself a new globe address
setgenerate true 16: starts mining Globe
hey thanks got it up and running. my next question is with getmininginfo it says 0 blocks etc, is this normal?
no problem, do command getinfo, in the section connection how many connections do you have?
it says 0 connections. i added the node in the conf file though
EDIT:it says connection 1
December 06, 2013, 04:47:00 PM
maybe bad starting up............
December 06, 2013, 04:46:46 PM
December 06, 2013, 04:46:19 PM
My wallet appears to be working and my conf file is fine but my hashespersec=0 and according to getpeerinfo no one else is connected. getmininginfo says that it is on block 0 and difficulty=1
any ideas on what I'm doing wrong? maybe we need to add more nodes?
any ideas on what I'm doing wrong? maybe we need to add more nodes?
close the binary add following lines if not done so already:
addnode=81.107.45.67
rpcport=8682
December 06, 2013, 04:46:11 PM
ok miner is running interesting such a ui-less coin
interesting such a ui-less coin December 06, 2013, 04:44:59 PM
well i don't have any connections right now
i only added the node what you posted. btw am able to globed getinfo now
i only added the node what you posted. btw am able to globed getinfo now
no problem
to make sure you have a connection close the binary (you can keep cmd up) and add the following line to globe.conf:addnode=81.107.45.67
also make sure you set the rpc port as shown:
rpcport=8682
December 06, 2013, 04:44:40 PM
Just another failcoin reading from the comments
December 06, 2013, 04:44:01 PM
My wallet appears to be working and my conf file is fine but my hashespersec=0 and according to getpeerinfo no one else is connected. getmininginfo says that it is on block 0 and difficulty=1
any ideas on what I'm doing wrong? maybe we need to add more nodes?
http://i.imgur.com/UFTFNpr.jpg" title="Hosted by imgur.com" />
any ideas on what I'm doing wrong? maybe we need to add more nodes?
December 06, 2013, 04:43:13 PM
hmm does it come up with an error message at all? Try running the file via cmd I have windows 7 seems to be working fine.
Just keeps saying I need to set my RPC user / pass in globe.conf (but I have that in there... so not sure what the issue is...
are you sure you saved it in the right place and format .conf not for example globe.conf.txt. Maybe try re-starting
Can you post your .conf file minus your private info? I made a .conf file but I must have done something your exe doesn't like.
Sure,
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcport=8682
addnode=81.107.45.67
rpcallowip=*
Nope, still having the same issue using that exact same config just chaging user / pass and local IP
December 06, 2013, 04:42:58 PM
well i don't have any connections right now
i only added the node what you posted. btw am able to globed getinfo now
i only added the node what you posted. btw am able to globed getinfo now
December 06, 2013, 04:41:05 PM
pitops you can open a new cmd prompt and use it like a normal wallet. Once the blank binary is running open a new cmd navigate to the location of your binary once in the same folder type the name of the file in this case globed followed by a command: e.g. globed getinfo Here are a list of all the commands : https://en.bitcoin.it/wiki/API_reference_(JSON-RPC). Some useful ones:
getinfo: gets you data on coin number of blocks connections etc
getmininginfo: gets you mining data hashes per secound etc
getnewaddress: gets yourself a new globe address
setgenerate true 16: starts mining Globe
getinfo: gets you data on coin number of blocks connections etc
getmininginfo: gets you mining data hashes per secound etc
getnewaddress: gets yourself a new globe address
setgenerate true 16: starts mining Globe
hey thanks got it up and running. my next question is with getmininginfo it says 0 blocks etc, is this normal?
no problem, do command getinfo, in the section connection how many connections do you have?
Jump to: