Author

Topic: [ANN] [ICB] IcebergCoin ❄︎ Big Update 27.11.❄︎ In-Wallet Tradebot❄︎ [MALWARE?] - page 112. (Read 225910 times)

full member
Activity: 146
Merit: 100
Is it me our do some of these post sound more like jealousy then "warnings". Yes the dev could possibly make off like a fat cat if he so chooses too. But give him a chance to make good first. Crypto is a business and I've never seen a business make it without profits. Don't like the coin then move on, but AT THIS POINT we all know what the dev got in ICO. We really don't need to here it again. We've all made a decision to go in on this or sit back and watch. Grab some popcorn and enjoy the ride ether way. Cause if Dev dips out i'm sure you guys will BURN you fingers off with the "I TOLD YOU SO POSTS"......

full member
Activity: 210
Merit: 100
100 BTC isnt much  Smiley  Smiley

$63,000 isn't much?? For the amount of work they have done?
sr. member
Activity: 620
Merit: 289
Ⓚ KORE TEAM Ⓚ ★ Portuguese/SPA
Icebergcoin dev why dont you split the free distribution coin amongst the people that signed for it, we´re short than the 1000 that where supposed to sign in.

Thanks
legendary
Activity: 1036
Merit: 1000
member
Activity: 98
Merit: 10
sr. member
Activity: 1624
Merit: 250
hero member
Activity: 714
Merit: 503
Im just finishing setting up my rigs for the launch
hero member
Activity: 658
Merit: 500
Just what if this coin is completely legit ^_^?

A complete legit coin where the dev gets 100 f*ckning BTC (!!!!) just to post now and then on a forum?!
You really think he will keep supporting this coin when he got 100BTC but not a single ICB in hands?
member
Activity: 98
Merit: 10
Just what if this coin is completely legit ^_^?
legendary
Activity: 1036
Merit: 1000
1. i have try to change signature, but it allways cut... whats wrong?
2. my sapphire radeon hd7950oc get only 7megahash/sec ... i think it should be over 10mega?

Code:

"intensity" : "21",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "256",
"kernel" : "nist5",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1100-1100",
"gpu-fan" : "60-60",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.300",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

what driver and miner are u using?

i use driver 14.4 and miner is http://cryptomining-blog.com/?s=nist5 nist5mod


14.6 plus dmj34 optimized miner ( https://mega.co.nz/#!sQkQ0JaY!CBz8JkqO8c0IB5ibdUDyeMNrp4hF4MqoU5a6FdJccXw ) kernel nist5
newbie
Activity: 70
Merit: 0
ANNOUNCE

Launch will happen in 2 hours and a half as scheduled.

We have made a change in the block structure in the last hour to ensure a fair and smooth launch.

The blocks with reward 0 were being mined slower than we thought at the begining, so we had to change it.

The final block structure is this one:

Block 1: premine
Blocks 2-5000: 0 reward
Blocks 5001-5100: 10 reward
Blocks 5101-15098: 500 reward
Block 15099: 0 reward (end POW)

So final number of coins will be 6.249.589 ICB.

You can see it in this chart:

https://i.imgur.com/4u24BEs.png


Right now we are in the block 4755. We are expecting launch the coin around the block 4900.

So we will have around 100 blocks with 0 reward, and 99 blocks with 10 reward. And later begin normal blocks.

We have already sent the new source to Bittrex. And everything is ready for a good launch.

Good luck everybody, and thank you for your support.



POW PHASE LAUNCH SCHEDULE:

http://s.mmgo.io/t/xw

July 13, Sunday, 2014 at 21:00 GMT
                                     14:00 PDT
                                     17:00 EDT



Hi your countdown reads 2hrs:10mins till launch. buts 19:50 GMT right now

It's 18.54GMT right now.

http://wwp.greenwichmeantime.com/

You are in GMT +1 due to summer time Wink
newbie
Activity: 56
Merit: 0
1. i have try to change signature, but it allways cut... whats wrong?
2. my sapphire radeon hd7950oc get only 7megahash/sec ... i think it should be over 10mega?

Code:

"intensity" : "21",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "256",
"kernel" : "nist5",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1100-1100",
"gpu-fan" : "60-60",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.300",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

what driver and miner are u using?

i use driver 14.4 and miner is http://cryptomining-blog.com/?s=nist5 nist5mod
sr. member
Activity: 378
Merit: 250
ANNOUNCE

Launch will happen in 2 hours and a half as scheduled.

We have made a change in the block structure in the last hour to ensure a fair and smooth launch.

The blocks with reward 0 were being mined slower than we thought at the begining, so we had to change it.

The final block structure is this one:

Block 1: premine
Blocks 2-5000: 0 reward
Blocks 5001-5100: 10 reward
Blocks 5101-15098: 500 reward
Block 15099: 0 reward (end POW)

So final number of coins will be 6.249.589 ICB.

You can see it in this chart:




Right now we are in the block 4755. We are expecting launch the coin around the block 4900.

So we will have around 100 blocks with 0 reward, and 99 blocks with 10 reward. And later begin normal blocks.

We have already sent the new source to Bittrex. And everything is ready for a good launch.

Good luck everybody, and thank you for your support.



POW PHASE LAUNCH SCHEDULE:



July 13, Sunday, 2014 at 21:00 GMT
                                     14:00 PDT
                                     17:00 EDT



Hi your countdown reads 2hrs:10mins till launch. buts 19:50 GMT right now
member
Activity: 117
Merit: 10
just to share some different settings, i took these from a redit page somewhere, i forget who though so sorry cant credit the OP

Code:
{
"pools" : [
{
"url" : "http://eu-01.miningrigrentals.com:3333",
"user" : "pugwilfy.5666",
"pass" : "x"
}
]
,
"rawintensity" : "131088",
"worksize" : "128",
"algorithm" : "talkcoin-mod",
"lookup-gap" : "2",
"thread-concurrency" : "13188",
"shaders" : "2048",
"gpu-threads" : "2",
"gpu-engine" : "0-0",
"gpu-fan" : "50-50",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "60",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"queue" : "1",
"scan-time" : "60",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/kernel/"
}

this is getting me a solid 7.8mh/s on a giga r9 270x, i use the same settings for x11/13/15 and get 2.5/2.0/1.5mh/s
newbie
Activity: 70
Merit: 0
ANNOUNCE

Launch will happen in 2 hours and a half as scheduled.

We have made a change in the block structure in the last hour to ensure a fair and smooth launch.

The blocks with reward 0 were being mined slower than we thought at the begining, so we had to change it.

The final block structure is this one:

Block 1: premine
Blocks 2-5000: 0 reward
Blocks 5001-5100: 10 reward
Blocks 5101-15098: 500 reward
Block 15099: 0 reward (end POW)

So final number of coins will be 6249490 ICB.

You can see it in this chart:

https://i.imgur.com/4u24BEs.png


Right now we are in the block 4755. We are expecting launch the coin around the block 4900.

So we will have around 100 blocks with 0 reward, and 99 blocks with 10 reward. And later begin normal blocks.

We have already sent the new source to Bittrex. And everything is ready for a good launch.

Good luck everybody, and thank you for your support.



POW PHASE LAUNCH SCHEDULE:

http://s.mmgo.io/t/xw

July 13, Sunday, 2014 at 21:00 GMT
                                     14:00 PDT
                                     17:00 EDT

full member
Activity: 150
Merit: 100
Ad Libertas!
but how to mine on bamt 1.6.2. ..i m not so good with adding new algo... is this algo mineable on linuxbamt ..pls link me some guide,.. ty  Cheesy

From the Root Terminal:
cd /opt/miners
git clone https://github.com/talkcoin/talkcoin-miner.git
cp -rvf /opt/miners/sgminer/ADL_SDK/ /opt/miners/talkcoin-miner/
cd talkcoin-miner/
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure
make

For the last step, I can't remember the file in BAMT but I think you need to change bamt.conf or something like that in order to get BAMT to launch the Talkcoin miner.  I don't have a BAMT system anymore to look at, sorry.  I use PiMP now Smiley

Otherwise, your settings for nist5 should be the same as for x11 but for "kernel" use talkcoin
legendary
Activity: 1036
Merit: 1000
1. i have try to change signature, but it allways cut... whats wrong?
2. my sapphire radeon hd7950oc get only 7megahash/sec ... i think it should be over 10mega?

Code:

"intensity" : "21",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "256",
"kernel" : "nist5",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1100-1100",
"gpu-fan" : "60-60",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.300",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

what driver and miner are u using?
hero member
Activity: 658
Merit: 500

And? This just means that there will be a launch otherwise dev will not get his 100 BTC. The dev will be gone after this launch. Obviously, he doesn't care about anything else. If Bittrex were to keep his 100 BTC premine for 1 year I would see the point otherwise this is just laughable.
When other devs sell their 1-5% premine after actually trying to achieve something the coin is ready for the grave, yet somehow Icebergcoin dev managed to pull 100 BTC premine sale and people still hope for the best. This is true magic!


+1


All the losers spending all there BTC on rentals will be the scam of the year once this dev gets his 100BTC for doing nothing at all, just posting messages every now and then.
The only way to stop this madness and to save people's money is to make this launch fail, but I don't know how to do it.

heheh that is a possible scenario, maybe happen or not.
I just want my 30 ICB for signature! Tongue
I'm kinda resisting in taking off my Rig from Multipools to mine NIST5 Smiley

Point your rigs to rental websites, that's the only way to profit from this coin.
The owners will get rich today, the renters will never ever ROI. To much ICO.
legendary
Activity: 2716
Merit: 1116

And? This just means that there will be a launch otherwise dev will not get his 100 BTC. The dev will be gone after this launch. Obviously, he doesn't care about anything else. If Bittrex were to keep his 100 BTC premine for 1 year I would see the point otherwise this is just laughable.
When other devs sell their 1-5% premine after actually trying to achieve something the coin is ready for the grave, yet somehow Icebergcoin dev managed to pull 100 BTC premine sale and people still hope for the best. This is true magic!


+1


All the losers spending all there BTC on rentals will be the scam of the year once this dev gets his 100BTC for doing nothing at all, just posting messages every now and then.
The only way to stop this madness and to save people's money is to make this launch fail, but I don't know how to do it.

heheh that is a possible scenario, maybe happen or not.
I just want my 30 ICB for signature! Tongue
I'm kinda resisting in taking off my Rig from Multipools to mine NIST5 Smiley
sr. member
Activity: 588
Merit: 250
We are happy to announce an agreement with Undergroundpool.
Undergroundpool will donate 0.5% of its fee to Icebergcoin Team to support our project. Thus, we encourage people to move their miners to Undergroundpool and help us in this new journey

We want to emphasize that Icebergcoin Team does not have any kind of relationship with UndergroundPool. And we encourage other pools to follow the footsteps of UndergroundPool.

Greetings




http://undergroundpool.me/

Thanks for all!

We are working to have everything running on launch. At the moment, we are doing test with talkcoin with NIST5. If you are interested in optimize your rig you can mine now in our pool.

An example of Nist5 Conf  to mine in our pool
Code:
C:\Users\x\Desktop\talkcoinminer\sgminer.exe -k talkcoin -o stratum+tcp://undergroundpool.me:3110 -u (WALLET TALKCOIN) -p 1 -I 20 -w 256 -g 1


The fee of our pool is 1%. The 50% of that fee will go to Icebergcoin Team to support they proyect






Wow trying my rigs there  Grin
Jump to: