Topic: [ANN] JIYO - Decentralised Instant Private - Masternodes - page 3. (Read 10702 times)
Dev, are you here?
When moon 
've had the opportunity to work briefly with this team on a couple of things. All I have to say is WOW!
This is a superb and extremely passionate team of developers. You can like the coin or hate the coin, but the team is beyond reproach. Rather than criticize or point out red flags, I suggest you contact the developer directly and *suggest* what you think should be different. I did - on discord - and before I finished typing my PM, I was invited into a group discussion with devs (there are far more than who you see in Discord). And within a few hours, my suggestion was implemented.
THIS is a team that a community can help grow substantially since they are wide open to constructive criticism, suggestions, and differentiating the coin from the pack. It's a coin that is in its infancy, but with this group of devs, JIYO can become *your* coin. Do NOT hesitate to contact them with questions and/or suggestions. It's the most open dev team I've experienced in crypto, and I have experienced many.
Disclosure: I have absolutely no affiliation with the coin and no prior knowledge of anyone on the team. I'm only writing this because the team has made me passionate about the project through their actions.
Support this coin. It is a diamond in the crypto rough.
This is a superb and extremely passionate team of developers. You can like the coin or hate the coin, but the team is beyond reproach. Rather than criticize or point out red flags, I suggest you contact the developer directly and *suggest* what you think should be different. I did - on discord - and before I finished typing my PM, I was invited into a group discussion with devs (there are far more than who you see in Discord). And within a few hours, my suggestion was implemented.
THIS is a team that a community can help grow substantially since they are wide open to constructive criticism, suggestions, and differentiating the coin from the pack. It's a coin that is in its infancy, but with this group of devs, JIYO can become *your* coin. Do NOT hesitate to contact them with questions and/or suggestions. It's the most open dev team I've experienced in crypto, and I have experienced many.
Disclosure: I have absolutely no affiliation with the coin and no prior knowledge of anyone on the team. I'm only writing this because the team has made me passionate about the project through their actions.
Support this coin. It is a diamond in the crypto rough.
Hello! We added your coin to our masternode-shared service - Midas Investments https://i.imgur.com/O5k5iGQ.jpg
hmm. interesting masternodes project.
we are going on coin exchange.io
gratz jiyo
This is actually great news. That exchange has some decent volume and that will definitely benefit Jiyo in its entirety (for better or for worse). It is also very noticeable that large cap coins are being listed in that exchange on a daily basis and the provides us a better outlook that they are choosing this exchange for a reason. I'm glad that the Jiyo team made this move. We will see good price movement in the future. gratz jiyo
we are going on coin exchange.io
gratz jiyo
gratz jiyo
I have earned with JI-YO for a new car (Volkswagen). Does anyone have a good quality logo of this coin to print?
check the Discord, someone should have something there.
I have earned with JI-YO for a new car (Volkswagen). Does anyone have a good quality logo of this coin to print?
I had an issue compiling the wallet in Ubuntu 18.04
Looking at the issue log on github it looks like others have had the same issue: https://github.com/jiyocoin/jiyo/issues/7
Does anyone know the solution?
Looking at the issue log on github it looks like others have had the same issue: https://github.com/jiyocoin/jiyo/issues/7
Does anyone know the solution?
Start staking with StakeUnited!
You can join us here: StakeUnited
And join our great discord community:
https://discord.gg/g2dS8Fc
You can join us here: StakeUnited
And join our great discord community:
https://discord.gg/g2dS8Fc
wish you Stakeunited spammers would piss off
Start staking with StakeUnited!
You can join us here: StakeUnited
And join our great discord community:
https://discord.gg/g2dS8Fc
You can join us here: StakeUnited
And join our great discord community:
https://discord.gg/g2dS8Fc
wish you Stakeunited spammers would piss off
You definitely broke config syntax. I'd recommend to use IPv4 address until you don't get and set right IPv6.
I do the same thing on another computer with IPv4 address and apparently it worked.
Thank you Dr Victor for your help!
hello tony please join our discord and message to crypto maniac (dev) as your screenshot problem is your not setting up masternode.conf correctly so batter go on discord and message there
1 most important thing dont share your team viewer or any remote access in discord with any other then dev scammer try to grab new people who have issue in MN setting and they stole coins so please be aware from stranger
discord link :- https://discord.gg/qJy6eEe
Scammers lurking in different Discord channels for different MN coins are now becoming a headache for many people. Saw many times that a member of a Discord channel getting scammed by sharing remote access in his team viewer app. It is better to make an announcement for those newbies who are green in this kind of situation.
At first, I thought that you are the Dev for Jiyo but it appears that you are a member of their team, is that correct?
Hi guys!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
I find these codes. But now it says "invalid port detected in masternode.conf" I used 6080 port, it's the right port.
Any ideea how to solve this? Please?
MN1 192.168.1.123:6080 {code from command masternode genkey } {masternode outputs} {0 or 1 from outputs command}
I will explain to you exactly:
I downloaded windows wallet. I installed the wallet on my computer, i do all that i saw in this links:
https://medium.com/@DarbyOGill_/masternodes-for-beginners-6c697119bc31
https://www.youtube.com/watch?v=1nxs4wAmPB4
https://www.youtube.com/watch?v=-Srdsf21v_o
And after that i restarted the wallet and it's not opening anymore. Look what the error says: https://i.imgur.com/shJ6KlG.jpg
Before i make the final step (jiyo.conf), it was nothing in masternode tab.
I have new type of IP but i don't think it's a problem.
In theory, everything is good, but it doesn't work .. help .. please?
hello tony please join our discord and message to crypto maniac (dev) as your screenshot problem is your not setting up masternode.conf correctly so batter go on discord and message there
1 most important thing dont share your team viewer or any remote access in discord with any other then dev scammer try to grab new people who have issue in MN setting and they stole coins so please be aware from stranger
discord link :- https://discord.gg/qJy6eEe
You definitely broke config syntax. I'd recommend to use IPv4 address until you don't get and set right IPv6.
Hi guys!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
I find these codes. But now it says "invalid port detected in masternode.conf" I used 6080 port, it's the right port.
Any ideea how to solve this? Please?
MN1 192.168.1.123:6080 {code from command masternode genkey } {masternode outputs} {0 or 1 from outputs command}
I will explain to you exactly:
I downloaded windows wallet. I installed the wallet on my computer, i do all that i saw in this links:
https://medium.com/@DarbyOGill_/masternodes-for-beginners-6c697119bc31
https://www.youtube.com/watch?v=1nxs4wAmPB4
https://www.youtube.com/watch?v=-Srdsf21v_o
And after that i restarted the wallet and it's not opening anymore. Look what the error says: https://i.imgur.com/shJ6KlG.jpg
Before i make the final step (jiyo.conf), it was nothing in masternode tab.
I have new type of IP but i don't think it's a problem.
In theory, everything is good, but it doesn't work .. help .. please?
Hi guys!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
I find these codes. But now it says "invalid port detected in masternode.conf" I used 6080 port, it's the right port.
Any ideea how to solve this? Please?
MN1 192.168.1.123:6080 {code from command masternode genkey } {masternode outputs} {0 or 1 from outputs command}
Hi guys!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
In masternode.conf says that i should enter a line like this:
Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
From where i can take the following:
masternodeprivkey
collateral_output_txid
collateral_output_index
Thank you!
I find these codes. But now it says "invalid port detected in masternode.conf" I used 6080 port, it's the right port.
Any ideea how to solve this? Please?
This project seems alright, will read about it more
Jump to: