Pages:
Author

Topic: [ANN] KZCASH - KZC - page 46. (Read 73855 times)

full member
Activity: 210
Merit: 100
AltMiner.Net | Low-Fee Pool | 2hr Payout
November 16, 2017, 07:45:22 AM
And the next time our node jumped on a wrong chain ...  Roll Eyes We'll activate KZ again once the network is stable.
member
Activity: 344
Merit: 14
November 16, 2017, 06:34:20 AM
Dudes, today is 16.11.
Where is the promised tickettothemoon? We are waiting your steps...

We just wait few hours for dumpers to sell off all their dump coins first )))
sr. member
Activity: 506
Merit: 250
November 16, 2017, 05:42:14 AM
IMPORTANT INFORMATION ABOUT MASTERNODES!

Math cases when several masternodes set up to use one and the same wallet.dat occasionally fall in EXPIRED status.

To avoid this problems one masternode should be set up on its own wallet.dat.

If You have two or more masternodes each should be using its own wallet.dat without connecting other masternodes to it.

Please remember that several masternodes cannot run on one server daemon because every masternode is a self-sufficient service unit.

Nodes connect to masternodes directly and they won't be able to do so in case if several masternodes are published through the same IP/port.

Each masternode needs own IP (or a separate port number), that is either they have to run on different VPS/devices each having own IP-address, or each has to be set up with it's own copy of datadir and initialized with its own server daemon, one daemon for one masternode, by configuring own particular P2P-port at kzcash.conf for each node daemon.

We will make a setup instruction for owners of two and more masternodes that will help them to study this process.


A new installation guide for one or several Masternodes is ready.

RU - https://drive.google.com/open?id=1_PMIpzLsH7KIVhfxFLM-JcBzFbOHy-C-RTcNVed-qbQ
EN - https://drive.google.com/open?id=1mtYNSx9sNztNPwfOIt12XTsGZjBrFdvpnFeGE454vcg

Ok i checked the new guide and found that to check MN status on vps i need to type " ./kzcash-cli getinfo " i did using putty and im now seeing " error: incorrect rpcuser or rpcpassword (authorization failed),  it appears my MN on Vps is not working, do i need to setup new masternode?
legendary
Activity: 1308
Merit: 1011
November 16, 2017, 05:39:50 AM

Dear miners!
The P2Pool community announcing an unprecedented promotion.
All miners, who mine KZCash coins on any P2Pool node will get bonuses on November 16, 2017! The total amount of coins for the share is 250 KZC.
The distribution of bonuses will be made automatically on November 16 at 24 h 00 min by Astana local time (18:00 GMT) in accordance with the current % in the distribution stayed from the next found block.
Example - if your wallet should receive 0.45KZC from the found block (2.25 KZC) at the moment of distribution of coins, then you will receive 20% of the bonus fund - 50KZC.
Given the feature of accruals on P2Pool - smooth achievement of maximum payments, we advise you to switch to work with any of the P2Pool nodes mining KZC in advance (at least 3 days).
List of nodes:
http://crypto.mine.nu:8279
http://pool.penza.me:8279
http://tomsk.mine.nu:8279
http://mine.janche.ru:8279

We wish you a successful mining!
P2Pool Community. https://t.me/p2pool
7 hours remaining
sr. member
Activity: 506
Merit: 250
November 16, 2017, 05:03:42 AM
Pls how do i check if the MN on VPS is running properly?
While you getting payments, it's running properly. If MN stops paying, just run "getinfo" in the console, and compare "blocks" parameter. If there is difference, you can compare it with the last block in the block explorer. Or compare "getblockhash" result for the last block. For me it was definitely frequent chain splits.
On my windows wallet i type getinfo i get
{
  "version": 10701,
  "protocolversion": 70207,
  "walletversion": 10100,
  "balance": 1020.45121860,
  "privatesend_balance": 0.00000000,
  "blocks": 14184,
  "timeoffset": 13,
  "connections": 8,
  "proxy": "",
  "difficulty": 140131.4259940106,
  "testnet": false,
  "keypoololdest": 1510437581,
  "keypoolsize": 1001,
  "paytxfee": 0.00000000,
  "relayfee": 0.00010000,
  "errors": ""
}
But when i close my wallet on my pc how do i check its working well on VPS?
newbie
Activity: 51
Merit: 0
November 16, 2017, 04:34:19 AM
Dudes, today is 16.11.
Where is the promised tickettothemoon? We are waiting your steps...
member
Activity: 344
Merit: 14
November 16, 2017, 04:20:26 AM
We also wait for 2 cold nodes on one wallet.dat solution. I have already collected for second node and don’t want make a lot of nonsensical actions of copy-paste-rename to separate my wallets

If You want them to run well please follow our instructions.
If You use one wallet.dat for 2+ Mns most probably there will be mistakes in work.
member
Activity: 74
Merit: 10
November 16, 2017, 01:17:05 AM
We also wait for 2 cold nodes on one wallet.dat solution. I have already collected for second node and don’t want make a lot of nonsensical actions of copy-paste-rename to separate my wallets
newbie
Activity: 51
Merit: 0
November 15, 2017, 11:40:50 PM


I apologize, but it's just the usual hot MN with the wallet with the money is on the server. and a copy of it - on Windows. What's the point? Two identical purses on Windows and in Linux.

But still, we waiting for the instructions for installing several masternodes on one server, as you promised.
full member
Activity: 151
Merit: 105
November 15, 2017, 04:59:51 PM
IMPORTANT INFORMATION ABOUT MASTERNODES!

Math cases when several masternodes set up to use one and the same wallet.dat occasionally fall in EXPIRED status.

To avoid this problems one masternode should be set up on its own wallet.dat.

If You have two or more masternodes each should be using its own wallet.dat without connecting other masternodes to it.

Please remember that several masternodes cannot run on one server daemon because every masternode is a self-sufficient service unit.

Nodes connect to masternodes directly and they won't be able to do so in case if several masternodes are published through the same IP/port.

Each masternode needs own IP (or a separate port number), that is either they have to run on different VPS/devices each having own IP-address, or each has to be set up with it's own copy of datadir and initialized with its own server daemon, one daemon for one masternode, by configuring own particular P2P-port at kzcash.conf for each node daemon.

We will make a setup instruction for owners of two and more masternodes that will help them to study this process.


A new installation guide for one or several Masternodes is ready.

RU - https://drive.google.com/open?id=1rD99A41j55Xiau4GtdtdzAl02FrH7oVK
EN - https://drive.google.com/open?id=1jK6X7jwf1T5z7kmwdrO7VdNcExSvxIXu
member
Activity: 344
Merit: 14
November 15, 2017, 04:52:28 PM
There is no point to answer each question, we will publish new MN instruction later today.


yes yes, just mastenodes at 0.04 btc won on the exchange were sold.
They need instructions

Sad((((((((

tricky games with 0.000 and 0.0000
1470 and 0470

Already noticed and warned before...
full member
Activity: 254
Merit: 101
November 15, 2017, 04:50:37 PM
Pls how do i check if the MN on VPS is running properly?
While you getting payments, it's running properly. If MN stops paying, just run "getinfo" in the console, and compare "blocks" parameter. If there is difference, you can compare it with the last block in the block explorer. Or compare "getblockhash" result for the last block. For me it was definitely frequent chain splits.
newbie
Activity: 51
Merit: 0
November 15, 2017, 04:38:38 PM
There is no point to answer each question, we will publish new MN instruction later today.


yes yes, just mastenodes at 0.04 btc won on the exchange were sold.
They need instructions

Sad((((((((
member
Activity: 344
Merit: 14
November 15, 2017, 04:12:13 PM
member
Activity: 344
Merit: 14
November 15, 2017, 04:07:23 PM
IMPORTANT INFORMATION ABOUT MASTERNODES!

Math cases when several masternodes set up to use one and the same wallet.dat occasionally fall in EXPIRED status.

To avoid this problems one masternode should be set up on its own wallet.dat.

If You have two or more masternodes each should be using its own wallet.dat without connecting other masternodes to it.

Please remember that several masternodes cannot run on one server daemon because every masternode is a self-sufficient service unit.

Nodes connect to masternodes directly and they won't be able to do so in case if several masternodes are published through the same IP/port.

Each masternode needs own IP (or a separate port number), that is either they have to run on different VPS/devices each having own IP-address, or each has to be set up with it's own copy of datadir and initialized with its own server daemon, one daemon for one masternode, by configuring own particular P2P-port at kzcash.conf for each node daemon.

We will make a setup instruction for owners of two and more masternodes that will help them to study this process.


There is no point to answer each question, we will publish new MN instruction later today.
member
Activity: 344
Merit: 14
November 15, 2017, 04:06:24 PM
Hi!
Do you know, when KZC will be listed on the mrank?
Cause, it was in ANN some days ago, and has been removed. But MN's have been fixed.
So, it will be great, to return KZC on the mrank.


We apllied earlier, we will return to this question on Your and other Community members' request in early December.
member
Activity: 344
Merit: 14
November 15, 2017, 03:40:28 PM
KZcash listed on any exchange so far ?

KZCash is listed on 3 exchanges so far:
- https://coinsmarkets.com/trade-BTC-KZC.htm
- https://www.tradesatoshi.com/Exchange/?market=KZC_BTC
- https://btc-alpha.com/exchange/KZC_BTC/

Coinsmarkets has markedly the largest daily volume of KZCash.

We noticed a kind of bot activity there, but generally it is market. As far as there are buyers they have sellers ))
member
Activity: 344
Merit: 14
November 15, 2017, 03:38:44 PM
What about problem with "expired". I had this one, and i've solve it. You should delete all data from your VPS wallet(exept conf. and walet.dat), and local wallet(exept mnconfig. and wallet.dat)
Then, you can make new start.
That  what i saying about. Masternodes and wallet sometimes goes to the wrong chain. Now i have 19hrs running MNs & the wallet, will see how it will going.

For MN we explained earlier. Standalone wallet works fine. We monitor the chain.
member
Activity: 344
Merit: 14
November 15, 2017, 03:37:43 PM
KZCash Team thanks Mr. Darklion84(Dmitry) for his temporar work as a part of our Team. He helped us much with the MN instruction (actually it was his draft as he mentioned it a good few times). He is a hardworker and we appreciated his hours spent in work.
PLEASE NOTE that present official MN instruction will be replaced.

KZCash Team announses a vacancy for Tech Support - online job, it is a part time job.
We would like to find a person skillful in servers running, Linux. We need a person with good technical English and (preferred) Russian.
Salary is competitive, negotiable.
Anyone who had any agreements with us can confirm - we pay always in time.
Please apply [email protected]
member
Activity: 344
Merit: 14
November 15, 2017, 03:28:32 PM
What about problem with "expired". I had this one, and i've solve it. You should delete all data from your VPS wallet(exept conf. and walet.dat), and local wallet(exept mnconfig. and wallet.dat)
Then, you can make new start.
That  what i saying about. Masternodes and wallet sometimes goes to the wrong chain. Now i have 19hrs running MNs & the wallet, will see how it will going.
Pls how do i check if the MN on VPS is running properly?

Good evening, Community!
Professional MN instruction is on the way, a matter of few hours.
Pages:
Jump to: