Topic: ^_^ [ANN] LimiCoin / X15 / pow-pos / Hashrate Limitation Removing - page 21. (Read 46820 times)
August 05, 2014, 01:40:42 PM
Good luck to all with this coin https://www.youtube.com/watch?v=rzzc-eGdozI
August 05, 2014, 01:39:01 PM
network hashrate 5.5Gh
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
For people who going to talk about network hashrate:
It is a problem of open source called MPOS:
https://github.com/MPOS/php-mpos/issues/1465
It just showing incorrect hashrate.
People can check block list to see if hidden pool available out there.
If you dont see a block from 2 pool, please use block explorer to check if it is pos block or not. PoS block cannot mine and will not show on any pool.
August 05, 2014, 01:27:36 PM
what i do wrong? I only get 39KH/s
sgminer 4.2.2 - Started: [2014-08-05 19:16:56] - [0 days 00:04:46]
--------------------------------------------------------------------------------
(5s):39.96K (avg):39.98Kh/s | A:0 R:0 HW:0 WU:0.000/m
ST: 1 SS: 0 NB: 5 LW: 238 GF: 0 RF: 0
Connected to limi.suprnova.cc (stratum) diff 0.004 as user xxxx.xxxx
Block: 4f888621... Diff:43 Started: [19:20:58] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU managementettings [D]isplay options [Q]uit
GPU 0: | 39.96K/39.98Kh/s | R: 0.0% HW:0 WU:0.000/m I: 8
--------------------------------------------------------------------------------
[19:16:53] Started sgminer 4.2.2
[19:16:53] * using Jansson 2.6
[19:16:54] ADL found less devices than opencl!
[19:16:54] There is possibly more than one display attached to a GPU
[19:16:54] Use the gpu map feature to reliably map OpenCL to ADL
[19:16:54] WARNING: Number of OpenCL and ADL devices did not match!
[19:16:54] Hardware monitoring may NOT match up with devices!
[19:16:54] Probing for an alive pool
[19:16:54] limi.suprnova.cc difficulty changed to 0.004
[19:16:54] Startup GPU initialization... Using settings from pool limi.suprnova.cc.
[19:16:54] Startup Pool No = 0
[19:16:54] Initialising kernel bitblock.cl with bitalign, unpatched BFI, nfactor 10, n 1024
sgminer 4.2.2 - Started: [2014-08-05 19:16:56] - [0 days 00:04:46]
--------------------------------------------------------------------------------
(5s):39.96K (avg):39.98Kh/s | A:0 R:0 HW:0 WU:0.000/m
ST: 1 SS: 0 NB: 5 LW: 238 GF: 0 RF: 0
Connected to limi.suprnova.cc (stratum) diff 0.004 as user xxxx.xxxx
Block: 4f888621... Diff:43 Started: [19:20:58] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management
GPU 0: | 39.96K/39.98Kh/s | R: 0.0% HW:0 WU:0.000/m I: 8
--------------------------------------------------------------------------------
[19:16:53] Started sgminer 4.2.2
[19:16:53] * using Jansson 2.6
[19:16:54] ADL found less devices than opencl!
[19:16:54] There is possibly more than one display attached to a GPU
[19:16:54] Use the gpu map feature to reliably map OpenCL to ADL
[19:16:54] WARNING: Number of OpenCL and ADL devices did not match!
[19:16:54] Hardware monitoring may NOT match up with devices!
[19:16:54] Probing for an alive pool
[19:16:54] limi.suprnova.cc difficulty changed to 0.004
[19:16:54] Startup GPU initialization... Using settings from pool limi.suprnova.cc.
[19:16:54] Startup Pool No = 0
[19:16:54] Initialising kernel bitblock.cl with bitalign, unpatched BFI, nfactor 10, n 1024
Your intensity is much too low mate.
Try - I 18
August 05, 2014, 01:24:16 PM
my "bat file"
sgminer -o stratum+tcp://limi.suprnova.cc:5555 -u xxxxx -p xxxxx --pool-algorithm bitblock --device -1
sgminer -o stratum+tcp://limi.suprnova.cc:5555 -u xxxxx -p xxxxx --pool-algorithm bitblock --device -1
August 05, 2014, 01:22:49 PM
what i do wrong? I only get 39KH/s
sgminer 4.2.2 - Started: [2014-08-05 19:16:56] - [0 days 00:04:46]
--------------------------------------------------------------------------------
(5s):39.96K (avg):39.98Kh/s | A:0 R:0 HW:0 WU:0.000/m
ST: 1 SS: 0 NB: 5 LW: 238 GF: 0 RF: 0
Connected to limi.suprnova.cc (stratum) diff 0.004 as user xxxx.xxxx
Block: 4f888621... Diff:43 Started: [19:20:58] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU managementettings [D]isplay options [Q]uit
GPU 0: | 39.96K/39.98Kh/s | R: 0.0% HW:0 WU:0.000/m I: 8
--------------------------------------------------------------------------------
[19:16:53] Started sgminer 4.2.2
[19:16:53] * using Jansson 2.6
[19:16:54] ADL found less devices than opencl!
[19:16:54] There is possibly more than one display attached to a GPU
[19:16:54] Use the gpu map feature to reliably map OpenCL to ADL
[19:16:54] WARNING: Number of OpenCL and ADL devices did not match!
[19:16:54] Hardware monitoring may NOT match up with devices!
[19:16:54] Probing for an alive pool
[19:16:54] limi.suprnova.cc difficulty changed to 0.004
[19:16:54] Startup GPU initialization... Using settings from pool limi.suprnova.cc.
[19:16:54] Startup Pool No = 0
[19:16:54] Initialising kernel bitblock.cl with bitalign, unpatched BFI, nfactor 10, n 1024
sgminer 4.2.2 - Started: [2014-08-05 19:16:56] - [0 days 00:04:46]
--------------------------------------------------------------------------------
(5s):39.96K (avg):39.98Kh/s | A:0 R:0 HW:0 WU:0.000/m
ST: 1 SS: 0 NB: 5 LW: 238 GF: 0 RF: 0
Connected to limi.suprnova.cc (stratum) diff 0.004 as user xxxx.xxxx
Block: 4f888621... Diff:43 Started: [19:20:58] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management
GPU 0: | 39.96K/39.98Kh/s | R: 0.0% HW:0 WU:0.000/m I: 8
--------------------------------------------------------------------------------
[19:16:53] Started sgminer 4.2.2
[19:16:53] * using Jansson 2.6
[19:16:54] ADL found less devices than opencl!
[19:16:54] There is possibly more than one display attached to a GPU
[19:16:54] Use the gpu map feature to reliably map OpenCL to ADL
[19:16:54] WARNING: Number of OpenCL and ADL devices did not match!
[19:16:54] Hardware monitoring may NOT match up with devices!
[19:16:54] Probing for an alive pool
[19:16:54] limi.suprnova.cc difficulty changed to 0.004
[19:16:54] Startup GPU initialization... Using settings from pool limi.suprnova.cc.
[19:16:54] Startup Pool No = 0
[19:16:54] Initialising kernel bitblock.cl with bitalign, unpatched BFI, nfactor 10, n 1024
August 05, 2014, 01:18:50 PM
question @ suprnova...
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Sure, but make sure you're not pointing too much, otherwise stratum will ban you for one minute
how can i understand i m banned? or will be banned?
i m pointing 20.2-20.4 mh/s aprox. should i lower my clockspeeds or is that fine?
You will get the message "Your worker is temporarily banned" in your cgminer/sgminer
20.4 is ok.. Limit is somewhere around 21.2 mh/s (1024 x 2)
August 05, 2014, 01:16:52 PM
network hashrate 5.5Gh
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
no private pool, check the blocks, just some guys pumping too much hash into the pools, but only the "legit" hash is counted.. the rest goes to the network and is split between miners
What does that mean for the difficulty calculation? Will it include the extra hash as well?
Yes - but it is no problem, as the distributed amount of coins will still stay the same between the miners (on the pool where the largest/larger hash is) because of the hashrate limitation.
At the end, they should notice they get banned for > 1 minute if the pump too much hash and those "overhashers" will get less coins because of that.
August 05, 2014, 01:14:45 PM
question @ suprnova...
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Sure, but make sure you're not pointing too much, otherwise stratum will ban you for one minute
how can i understand i m banned? or will be banned?
i m pointing 20.2-20.4 mh/s aprox. should i lower my clockspeeds or is that fine?
August 05, 2014, 01:13:36 PM
network hashrate 5.5Gh
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
no private pool, check the blocks, just some guys pumping too much hash into the pools, but only the "legit" hash is counted.. the rest goes to the network and is split between miners
What does that mean for the difficulty calculation? Will it include the extra hash as well?
August 05, 2014, 01:09:28 PM
Interesting stuff. No pool before end of PoW, no other pools. Bravo.
August 05, 2014, 01:06:49 PM
network hashrate 5.5Gh
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Block in this 2 pool.Don't worry about the other hash.
August 05, 2014, 01:03:04 PM
network hashrate 5.5Gh
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
no private pool, check the blocks, just some guys pumping too much hash into the pools, but only the "legit" hash is counted.. the rest goes to the network and is split between miners
August 05, 2014, 01:02:58 PM
network hashrate 5.5Gh
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
best you check blocks I cant im at work .im sure things are ok Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
August 05, 2014, 01:02:45 PM
network hashrate 5.5Gh
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Suprnova 2.5 gh
Maxminers 1.2 Gh
discrepenacy of 1.8Gh
Dev have you private pool
you think we stupid?
Well... I dont know about that... But when Im comparing the found blocks on both pools... theres not 1 missing
I will keep watching though...
August 05, 2014, 12:51:50 PM
question @ suprnova...
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Sure, but make sure you're not pointing too much, otherwise stratum will ban you for one minute
awesome... thank you!
smooth relaunch btw dev!
August 05, 2014, 12:49:44 PM
question @ suprnova...
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
Sure, but make sure you're not pointing too much, otherwise stratum will ban you for one minute
August 05, 2014, 12:48:31 PM
question @ suprnova...
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
edit:
btw dude...
Is it allowed too point multiple rigs towards 1 worker, as long as Im not breaking the 20mhs limit?
edit:
btw dude...
August 05, 2014, 12:47:37 PM
block 180 , good luck everyone
August 05, 2014, 12:40:07 PM
Going to break block 180, coins coming
August 05, 2014, 12:35:06 PM
speed x15 (r280x) 2.722M/2.722Mh/s its ok ?
i think so. that is about what i am getting too
not very good at all, i have liitle more, but its depends on bios driver, video drivers, miner version
"intensity" : "19",
"worksize" : "64",
"algorithm" : "bitblock",
"gpu-threads" : "2",
"gpu-powertune" : "20",
"gpu-engine" : "1095",
"gpu-memclock" : "1500"
with this, i get 2.85-2.9 !!! Cheers
i got intenstiy 18 , let me see with 19
Jump to: