did you hover with your mouse between slot and wifi symbole to see if you re actualy staking
on the left in picture above this post
Topic: [ANN] LINDA-PoW/PoS-99% APR- MASTERNODE-MULTI-WALLET - page 7. (Read 95214 times)
Staking works fine btw
maybe for you but not for some of us. Again, I can be 3 to 4 days without receiving stake and those amount are a lot smaller than what they are suppose to be.
Ill create another address and move the coins to see if it gets better, if not then Ill just assume the devs choose who gets the stake manually.
My coins are not shown as being staked, just in my spendable. But at the same time I have a masternode running and am receiving miner transactions about twice daily.
staking is also working very nice if you have questions like i did the slack channel is the best place for support the community there is very active and willing to help
well another day without stake for us apparently.
staking is also working very nice if you have questions like i did the slack channel is the best place for support the community there is very active and willing to help
Compared to some of the other masternode wallets I'm running the Linda wallet is holding up well. It's been a very stable node with no problems, thanks team! 
You make amerika great again.
I am Sofa King, we Todd Ed.
I am Sofa King, we Todd Ed.
more stupidity... Trump would be proud of you.
You make amerika great again.
I am Sofa King, we Todd Ed.
I am Sofa King, we Todd Ed.
Your first sentence was ok.
Your second sentence was infantile.
Your second sentence was infantile.
read your post again, you know, the one where you tell us we are lying...
Infantile reply to a kid, now you know why (you probably wont understand but who cares)
Your first sentence was ok.
Your second sentence was infantile.
If some days waiting is for you an "official dead coin", than PPC or NVC will be organisated scam for you. Because you have to wait 30days until mature and without huge stack you will wait months for reward
PS:
Marketcap is now working for Linda.
Your second sentence was infantile.
If some days waiting is for you an "official dead coin", than PPC or NVC will be organisated scam for you. Because you have to wait 30days until mature and without huge stack you will wait months for reward
PS:
Marketcap is now working for Linda.
Staking working well.
Guys, if you dont like the project, than look for other coins, but stop talking Bullshet and give room for growing.
At this time the devs dont give any reasons for bullshiting.
Guys, if you dont like the project, than look for other coins, but stop talking Bullshet and give room for growing.
At this time the devs dont give any reasons for bullshiting.
I received a stake today, the first in 4 days, same for my friends. Its not the first time I get no stake for days btw, so yeah, stop the bullshit kiddo.
Should I start to spread lies to please you ?
Staking working well.
Guys, if you dont like the project, than look for other coins, but stop talking Bullshet and give room for growing.
At this time the devs dont give any reasons for bullshiting.
Guys, if you dont like the project, than look for other coins, but stop talking Bullshet and give room for growing.
At this time the devs dont give any reasons for bullshiting.
Thanks for the link! I believe I am closer now. I was able to download the source code and get past the make install for the secp256k1. I seem to be stuck now at this portion. If I try running either command it just sits at the command window at at a > prompt. Has anyone else built from the source code?
Code:
To Build Linda-QT
--------
With UPNP:
qmake -qt=qt5 && \
make \
(Recommended) Without UPNP:
qmake -qt=qt5 USE_UPNP=- && \
make \
So I have tried downloading the Linux wallet from the git page and the website. It won't open. It says that I do not have a program on the machine that handles .exe files. I let it find a program for me and it downloaded pypar2 which looks like some compressed file scanner. I found another guy having the same problem for a different wallet, and he right-clicked the file (so I would right-click Linda-qt) and go to properties. On the permissions tab he checked the "allow execution" checkbox and that took care of his problem. Unfortunately that still doesn't work. It creates another file in the same directory with a weird encrypted looking name that contains nothing. Trying to launch via terminal yields
I'm running ubunto mate on my raspberry pi. I just setup a masternode last week for a different coin so I don't want to change it. My windows wallet works fine but I don't want to leave another computer on 24/7 to try and stake coins. I read that there is a program called "wine" for running exe programs on linux. But I believe that is more for windows executable's. I'm willing to give it a try, but I don't feel too confidant in it.
I also tried the no gui pi wallet but couldn't get that to work. And I tried the no gui linux wallet. Probably my problem is because I'm using a pi which doesn't have common architecture. Then the one "non-gui" wallet that is present is probably meant for the raspberian OS and not Ubunto Mate.
Code:
-bash: ./Linda-qt: cannot execute binary file: Exec format error
I'm running ubunto mate on my raspberry pi. I just setup a masternode last week for a different coin so I don't want to change it. My windows wallet works fine but I don't want to leave another computer on 24/7 to try and stake coins. I read that there is a program called "wine" for running exe programs on linux. But I believe that is more for windows executable's. I'm willing to give it a try, but I don't feel too confidant in it.
I also tried the no gui pi wallet but couldn't get that to work. And I tried the no gui linux wallet. Probably my problem is because I'm using a pi which doesn't have common architecture. Then the one "non-gui" wallet that is present is probably meant for the raspberian OS and not Ubunto Mate.
The binary will be likely be for the x86 architecture and raspberry is ARM, you'll likely need to compile the wallet code by pulling it from github and follow the build instructions https://github.com/Lindacoin/Linda/blob/master/doc/build-unix.md
So I have tried downloading the Linux wallet from the git page and the website. It won't open. It says that I do not have a program on the machine that handles .exe files. I let it find a program for me and it downloaded pypar2 which looks like some compressed file scanner. I found another guy having the same problem for a different wallet, and he right-clicked the file (so I would right-click Linda-qt) and go to properties. On the permissions tab he checked the "allow execution" checkbox and that took care of his problem. Unfortunately that still doesn't work. It creates another file in the same directory with a weird encrypted looking name that contains nothing. Trying to launch via terminal yields
I'm running ubunto mate on my raspberry pi. I just setup a masternode last week for a different coin so I don't want to change it. My windows wallet works fine but I don't want to leave another computer on 24/7 to try and stake coins. I read that there is a program called "wine" for running exe programs on linux. But I believe that is more for windows executable's. I'm willing to give it a try, but I don't feel too confidant in it.
I also tried the no gui pi wallet but couldn't get that to work. And I tried the no gui linux wallet. Probably my problem is because I'm using a pi which doesn't have common architecture. Then the one "non-gui" wallet that is present is probably meant for the raspberian OS and not Ubunto Mate.
Code:
-bash: ./Linda-qt: cannot execute binary file: Exec format error
I'm running ubunto mate on my raspberry pi. I just setup a masternode last week for a different coin so I don't want to change it. My windows wallet works fine but I don't want to leave another computer on 24/7 to try and stake coins. I read that there is a program called "wine" for running exe programs on linux. But I believe that is more for windows executable's. I'm willing to give it a try, but I don't feel too confidant in it.
I also tried the no gui pi wallet but couldn't get that to work. And I tried the no gui linux wallet. Probably my problem is because I'm using a pi which doesn't have common architecture. Then the one "non-gui" wallet that is present is probably meant for the raspberian OS and not Ubunto Mate.
Why Windows wallet have viruses?
https://www.virustotal.com/#/file/32bdfaba778ce18a09c348cca18612799249ba79f04f694237d8aa93ab837cd1/
nope...https://www.virustotal.com/#/file/32bdfaba778ce18a09c348cca18612799249ba79f04f694237d8aa93ab837cd1/
Thanks a lot for such informative answer!
Why Windows wallet have viruses?
https://www.virustotal.com/#/file/32bdfaba778ce18a09c348cca18612799249ba79f04f694237d8aa93ab837cd1/
nope... https://www.virustotal.com/#/file/32bdfaba778ce18a09c348cca18612799249ba79f04f694237d8aa93ab837cd1/
Why Windows wallet have viruses?
https://www.virustotal.com/#/file/32bdfaba778ce18a09c348cca18612799249ba79f04f694237d8aa93ab837cd1/
https://www.virustotal.com/#/file/32bdfaba778ce18a09c348cca18612799249ba79f04f694237d8aa93ab837cd1/
no stake for the last 3 days...
This coin is officially dead
This coin is officially dead
Staking working fine here:
Jump to: