Topic: [ANN] LIZARDE | LIZE | X15 | POW | POS | HUGE GIVEAWAYS | BOUNTY | LAUNCHED (Read 36300 times)
November 15, 2015, 11:15:37 AM
RIP
November 15, 2015, 11:15:08 AM
Nothing to do:
Last post dev July 19, 2014
It is dead coin , Its happens when somebody revive old threads.
Last post dev July 19, 2014
It is dead coin , Its happens when somebody revive old threads.
No reason to talk about this anymore, only if you want to takeover?
Agree, But anyway if somebody does any takeover it will not change status as dead coin. The other guy should not have revived thread 8 months after.
November 15, 2015, 10:35:14 AM
Nothing to do:
Last post dev July 19, 2014
It is dead coin , Its happens when somebody revive old threads.
Last post dev July 19, 2014
It is dead coin , Its happens when somebody revive old threads.
No reason to talk about this anymore, only if you want to takeover?
November 15, 2015, 09:58:31 AM
Nothing to do:
Last post dev July 19, 2014
It is dead coin , Its happens when somebody revive old threads.
Edit:
Just to avoid misunderstandings this coin was listed on number five on the dead coins list due to dev left the coin more precisely when it was first created .The post was done to reply a post of another member. Obviously there was no reply of the community to revive this.
Declared dead: October 05, 14
My post was done: March 07, 15 *5 months after to reply to an post done for another member the same day.
Somebody revived thread: November 13,15 *8 months after in response to nothing.
PS: Almost takeovers looks dont work, Dead coins thread began to consider those as are not legitimate more recently, lasting or likely to succeed on the most cases.
Last post dev July 19, 2014
It is dead coin , Its happens when somebody revive old threads.
Edit:
Just to avoid misunderstandings this coin was listed on number five on the dead coins list due to dev left the coin more precisely when it was first created .The post was done to reply a post of another member. Obviously there was no reply of the community to revive this.
Declared dead: October 05, 14
My post was done: March 07, 15 *5 months after to reply to an post done for another member the same day.
Somebody revived thread: November 13,15 *8 months after in response to nothing.
PS: Almost takeovers looks dont work, Dead coins thread began to consider those as are not legitimate more recently, lasting or likely to succeed on the most cases.
November 15, 2015, 09:56:17 AM
Thanks bit1. This blockchain seems to be healthy. At least I can import my wallet without any error this time.
I've PM'ed icam1968 too. Let's hope he can really come back as he promised to move this blockchain again.
You know what is funny about all this funbitcoins? is that even if bit1 given you a copy of the blockchain when he considered this coin dead... I'm wondering if our dead bit1 still has the blockchain or deleted it because on that case he killed the coin
Why gravedig such old coins?
I'm not exactly gradigging, is because bit1 deadcoin list credibily for me is almost zero and so finding this old post made from bit1 supporting the coin raised me more questions about he, i wasn't planning on using the coin anyway
November 15, 2015, 09:53:29 AM
Thanks bit1. This blockchain seems to be healthy. At least I can import my wallet without any error this time.
I've PM'ed icam1968 too. Let's hope he can really come back as he promised to move this blockchain again.
You know what is funny about all this funbitcoins? is that even if bit1 given you a copy of the blockchain when he considered this coin dead... I'm wondering if our dead bit1 still has the blockchain or deleted it because on that case he killed the coin
Why gravedig such old coins?
November 15, 2015, 08:23:34 AM
Please provide a list of working nodes. I have tried to synchronized my wallet but without success. Thanks!
November 14, 2015, 07:43:20 PM
RIP
November 14, 2015, 07:39:44 PM
You know what is funny about all this funbitcoins? is that even if bit1 given you a copy of the blockchain when he considered this coin dead... I'm wondering if our dead bit1 still has the blockchain or deleted it because on that case he killed the coin
You should start by reading the date of the post
. To revive old threads is not good idea, My post was: March
and you was: November
The more probably is that I added this coin to the list long after my post after I saw that no one else was interested .
Now with your permission I will mark this as RIP.
November 13, 2015, 04:44:06 PM
Thanks bit1. This blockchain seems to be healthy. At least I can import my wallet without any error this time.
I've PM'ed icam1968 too. Let's hope he can really come back as he promised to move this blockchain again.
You know what is funny about all this funbitcoins? is that even if bit1 given you a copy of the blockchain when he considered this coin dead... I'm wondering if our dead bit1 still has the blockchain or deleted it because on that case he killed the coin
March 09, 2015, 01:07:48 AM
Thanks bit1. This blockchain seems to be healthy. At least I can import my wallet without any error this time.
I've PM'ed icam1968 too. Let's hope he can really come back as he promised to move this blockchain again.
March 07, 2015, 12:40:13 PM
Reserve me French translation. I'm working on it. But there isn't any exchanger after near one year ?
March 07, 2015, 12:25:03 PM
February 04, 2015, 12:48:29 AM
So, what happened? do you have sync now? I heard somebody to have block height -----> 25055 ,PM if you need something ..................
December 24, 2014, 05:26:14 PM
Hi all,
If anyone is willing can you post a Dropbox/Google Drive link, to the following files from your wallet folder, (C:\Users\YourUserName\Appdata\Roaming\Lizarde)
blk0001.dat
blkindex.dat
and also the file inside the folder "database"
I can use them to get a sync on the go. Had 2 connections a little while ago, but need this data to get a healthy block chain.
Thanks, and Merry Xmas to those who celebrate!
If anyone is willing can you post a Dropbox/Google Drive link, to the following files from your wallet folder, (C:\Users\YourUserName\Appdata\Roaming\Lizarde)
blk0001.dat
blkindex.dat
and also the file inside the folder "database"
I can use them to get a sync on the go. Had 2 connections a little while ago, but need this data to get a healthy block chain.
Thanks, and Merry Xmas to those who celebrate!
November 18, 2014, 09:13:47 AM
https://bitcointalksearch.org/topic/annccb-cryptoclub-round-p-32-667866
Scroll down to the Swap Rounds section.
Scroll down to the Swap Rounds section.
Thanks for sharing this information. It's really interesting.
Can you sync your Lizarde wallet?
You or anyone who can sync please post the working nodes here.
Unfortunately, no nodes for 4 weeks now. I was getting a connection around 1am, every night for a few hours before that. Got my wallet open 24/7, more in hope than expectation.
I see... It seems you're really a supporter for LIZE. But if you can manage to open your wallet 24/7 why don't you just try to maintain a node to make this coin working again?
That's not something I know how to go about. If you could let me know, I would give it a go.
Read this: https://bitcointalksearch.org/topic/setting-up-a-bitcoin-node-128122
Of course you shouldn't use the port 8333, it's only or Bitcoin. You should use the one for LIZE instead.
After you set it up, post your node information here so that other people can connect to you. You can't run the network alone unless you have multiple internet connections.
Thanks for the info. I've set up as per the instructions, so hopefully it should work .
addnode=88.14.191.181
Can't connect this node even I've forced my wallet to do so.
My debug.log:
trying connection 88.14.191.181:50111 lastseen=365399.3hrs
connection timeout
You sure you've set up your router correctly or you haven't opened your wallet long time ago?
My apologies node should be
addnode=86.14.191.181
Nice, I can see your node now.
"addr" : "86.14.191.181:50111",
"services" : "00000001",
"lastsend" : 1415949257,
"lastrecv" : 1415949257,
"conntime" : 1415948937,
"version" : 60017,
"subver" : "/Lizarde:1.0.1.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 24615,
"banscore" : 0
However, just like someone posted earlier, I can't sync the wallet too.
My debug.log shows many orphan blocks received. For example:
received block 000002e2ef6a87a6eae1
ProcessBlock: ORPHAN BLOCK, prev=00000d90d253d8adb9a0
received block 00000d90d253d8adb9a0
ProcessBlock: ORPHAN BLOCK, prev=0000079789de3031432f
received block 0000079789de3031432f
ProcessBlock: ORPHAN BLOCK, prev=000000d177c1d8b9c30c
received block 000000d177c1d8b9c30c
ProcessBlock: ORPHAN BLOCK, prev=0000073aa173b5d0aaa5
received block 0000073aa173b5d0aaa5
ProcessBlock: ORPHAN BLOCK, prev=00000ed7bfbe7891669f
received block 00000ed7bfbe7891669f
ProcessBlock: ORPHAN BLOCK, prev=00000bd934e4adb67c3b
received block 00000bd934e4adb67c3b
ProcessBlock: ORPHAN BLOCK, prev=00000f4e1d77c37bd652
To make it simple, I suggest that you upload your blockchain data to dropdox or mega so that everyone can sync properly and move the network together.
You'll just need to upload these 3 files:
blk0001.dat
blkindex.dat
and also the file inside the folder "database"
You may zip these files before you upload them and then post the download link here. Thanks again.
Drop Box Link
https://www.dropbox.com/s/inh8e7nb5zmsqbs/Lizarde%20Sync%20Files.zip?dl=0
Thanks for your blockchain data. I finally figure out why people can’t sync properly with you. Your blockchain is obviously corrupted. We can't use it to run the network.
When I started the wallet with your blockchain data, I got the following error:
Assertion failed!
Expression: pindex->pprev || pindex->getblockHash() == (!fTestNet ? hashGenesisBlock : hashGenesisBlockTestNet)
It seems at least your genesis block data gets corrupted. That’s why even if I started the wallet from scratch, I could only download orphan blocks data from your node. You may ask any of your friends to try doing the same and you will understand what is wrong.
Since there is no other node and you can’t fix it yourself, the only workable solution now is to ask any member who has an uncorrupted wallet to upload his blockchain data for you. My blockchain data should be fine but my latest block height is only 16355. If you still want to try I can upload it for you. I’ve also PM chilo since he said he had only 1000 blocks short.
Hi,
Thanks for all the info. I am actually really enjoying learning some of the workings of the QT Wallet! If you, or someone else could upload the block chain for me, I will replace mine and give it a go. Not a lot to lose really, and hopefully everyone can sync up and share in some CCB!
My block height was around 24600, again somewhere around 1000 short, so Chilo may be the best bet.
Cheers.
November 17, 2014, 06:18:38 AM
https://bitcointalksearch.org/topic/annccb-cryptoclub-round-p-32-667866
Scroll down to the Swap Rounds section.
Scroll down to the Swap Rounds section.
Thanks for sharing this information. It's really interesting.
Can you sync your Lizarde wallet?
You or anyone who can sync please post the working nodes here.
Unfortunately, no nodes for 4 weeks now. I was getting a connection around 1am, every night for a few hours before that. Got my wallet open 24/7, more in hope than expectation.
I see... It seems you're really a supporter for LIZE. But if you can manage to open your wallet 24/7 why don't you just try to maintain a node to make this coin working again?
That's not something I know how to go about. If you could let me know, I would give it a go.
Read this: https://bitcointalksearch.org/topic/setting-up-a-bitcoin-node-128122
Of course you shouldn't use the port 8333, it's only or Bitcoin. You should use the one for LIZE instead.
After you set it up, post your node information here so that other people can connect to you. You can't run the network alone unless you have multiple internet connections.
Thanks for the info. I've set up as per the instructions, so hopefully it should work .
addnode=88.14.191.181
Can't connect this node even I've forced my wallet to do so.
My debug.log:
trying connection 88.14.191.181:50111 lastseen=365399.3hrs
connection timeout
You sure you've set up your router correctly or you haven't opened your wallet long time ago?
My apologies node should be
addnode=86.14.191.181
Nice, I can see your node now.
"addr" : "86.14.191.181:50111",
"services" : "00000001",
"lastsend" : 1415949257,
"lastrecv" : 1415949257,
"conntime" : 1415948937,
"version" : 60017,
"subver" : "/Lizarde:1.0.1.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 24615,
"banscore" : 0
However, just like someone posted earlier, I can't sync the wallet too.
My debug.log shows many orphan blocks received. For example:
received block 000002e2ef6a87a6eae1
ProcessBlock: ORPHAN BLOCK, prev=00000d90d253d8adb9a0
received block 00000d90d253d8adb9a0
ProcessBlock: ORPHAN BLOCK, prev=0000079789de3031432f
received block 0000079789de3031432f
ProcessBlock: ORPHAN BLOCK, prev=000000d177c1d8b9c30c
received block 000000d177c1d8b9c30c
ProcessBlock: ORPHAN BLOCK, prev=0000073aa173b5d0aaa5
received block 0000073aa173b5d0aaa5
ProcessBlock: ORPHAN BLOCK, prev=00000ed7bfbe7891669f
received block 00000ed7bfbe7891669f
ProcessBlock: ORPHAN BLOCK, prev=00000bd934e4adb67c3b
received block 00000bd934e4adb67c3b
ProcessBlock: ORPHAN BLOCK, prev=00000f4e1d77c37bd652
To make it simple, I suggest that you upload your blockchain data to dropdox or mega so that everyone can sync properly and move the network together.
You'll just need to upload these 3 files:
blk0001.dat
blkindex.dat
and also the file inside the folder "database"
You may zip these files before you upload them and then post the download link here. Thanks again.
Drop Box Link
https://www.dropbox.com/s/inh8e7nb5zmsqbs/Lizarde%20Sync%20Files.zip?dl=0
Thanks for your blockchain data. I finally figure out why people can’t sync properly with you. Your blockchain is obviously corrupted. We can't use it to run the network.
When I started the wallet with your blockchain data, I got the following error:
Assertion failed!
Expression: pindex->pprev || pindex->getblockHash() == (!fTestNet ? hashGenesisBlock : hashGenesisBlockTestNet)
It seems at least your genesis block data gets corrupted. That’s why even if I started the wallet from scratch, I could only download orphan blocks data from your node. You may ask any of your friends to try doing the same and you will understand what is wrong.
Since there is no other node and you can’t fix it yourself, the only workable solution now is to ask any member who has an uncorrupted wallet to upload his blockchain data for you. My blockchain data should be fine but my latest block height is only 16355. If you still want to try I can upload it for you. I’ve also PM chilo since he said he had only 1000 blocks short.
November 14, 2014, 08:37:52 AM
https://bitcointalksearch.org/topic/annccb-cryptoclub-round-p-32-667866
Scroll down to the Swap Rounds section.
Scroll down to the Swap Rounds section.
Thanks for sharing this information. It's really interesting.
Can you sync your Lizarde wallet?
You or anyone who can sync please post the working nodes here.
Unfortunately, no nodes for 4 weeks now. I was getting a connection around 1am, every night for a few hours before that. Got my wallet open 24/7, more in hope than expectation.
I see... It seems you're really a supporter for LIZE. But if you can manage to open your wallet 24/7 why don't you just try to maintain a node to make this coin working again?
That's not something I know how to go about. If you could let me know, I would give it a go.
Read this: https://bitcointalksearch.org/topic/setting-up-a-bitcoin-node-128122
Of course you shouldn't use the port 8333, it's only or Bitcoin. You should use the one for LIZE instead.
After you set it up, post your node information here so that other people can connect to you. You can't run the network alone unless you have multiple internet connections.
Thanks for the info. I've set up as per the instructions, so hopefully it should work .
addnode=88.14.191.181
Can't connect this node even I've forced my wallet to do so.
My debug.log:
trying connection 88.14.191.181:50111 lastseen=365399.3hrs
connection timeout
You sure you've set up your router correctly or you haven't opened your wallet long time ago?
My apologies node should be
addnode=86.14.191.181
Nice, I can see your node now.
"addr" : "86.14.191.181:50111",
"services" : "00000001",
"lastsend" : 1415949257,
"lastrecv" : 1415949257,
"conntime" : 1415948937,
"version" : 60017,
"subver" : "/Lizarde:1.0.1.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 24615,
"banscore" : 0
However, just like someone posted earlier, I can't sync the wallet too.
My debug.log shows many orphan blocks received. For example:
received block 000002e2ef6a87a6eae1
ProcessBlock: ORPHAN BLOCK, prev=00000d90d253d8adb9a0
received block 00000d90d253d8adb9a0
ProcessBlock: ORPHAN BLOCK, prev=0000079789de3031432f
received block 0000079789de3031432f
ProcessBlock: ORPHAN BLOCK, prev=000000d177c1d8b9c30c
received block 000000d177c1d8b9c30c
ProcessBlock: ORPHAN BLOCK, prev=0000073aa173b5d0aaa5
received block 0000073aa173b5d0aaa5
ProcessBlock: ORPHAN BLOCK, prev=00000ed7bfbe7891669f
received block 00000ed7bfbe7891669f
ProcessBlock: ORPHAN BLOCK, prev=00000bd934e4adb67c3b
received block 00000bd934e4adb67c3b
ProcessBlock: ORPHAN BLOCK, prev=00000f4e1d77c37bd652
To make it simple, I suggest that you upload your blockchain data to dropdox or mega so that everyone can sync properly and move the network together.
You'll just need to upload these 3 files:
blk0001.dat
blkindex.dat
and also the file inside the folder "database"
You may zip these files before you upload them and then post the download link here. Thanks again.
Drop Box Link
https://www.dropbox.com/s/inh8e7nb5zmsqbs/Lizarde%20Sync%20Files.zip?dl=0
November 14, 2014, 06:26:52 AM
Followed & Sign changed..Good luck
November 14, 2014, 02:40:59 AM
https://bitcointalksearch.org/topic/annccb-cryptoclub-round-p-32-667866
Scroll down to the Swap Rounds section.
Scroll down to the Swap Rounds section.
Thanks for sharing this information. It's really interesting.
Can you sync your Lizarde wallet?
You or anyone who can sync please post the working nodes here.
Unfortunately, no nodes for 4 weeks now. I was getting a connection around 1am, every night for a few hours before that. Got my wallet open 24/7, more in hope than expectation.
I see... It seems you're really a supporter for LIZE. But if you can manage to open your wallet 24/7 why don't you just try to maintain a node to make this coin working again?
That's not something I know how to go about. If you could let me know, I would give it a go.
Read this: https://bitcointalksearch.org/topic/setting-up-a-bitcoin-node-128122
Of course you shouldn't use the port 8333, it's only or Bitcoin. You should use the one for LIZE instead.
After you set it up, post your node information here so that other people can connect to you. You can't run the network alone unless you have multiple internet connections.
Thanks for the info. I've set up as per the instructions, so hopefully it should work .
addnode=88.14.191.181
Can't connect this node even I've forced my wallet to do so.
My debug.log:
trying connection 88.14.191.181:50111 lastseen=365399.3hrs
connection timeout
You sure you've set up your router correctly or you haven't opened your wallet long time ago?
My apologies node should be
addnode=86.14.191.181
Nice, I can see your node now.
"addr" : "86.14.191.181:50111",
"services" : "00000001",
"lastsend" : 1415949257,
"lastrecv" : 1415949257,
"conntime" : 1415948937,
"version" : 60017,
"subver" : "/Lizarde:1.0.1.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 24615,
"banscore" : 0
However, just like someone posted earlier, I can't sync the wallet too.
My debug.log shows many orphan blocks received. For example:
received block 000002e2ef6a87a6eae1
ProcessBlock: ORPHAN BLOCK, prev=00000d90d253d8adb9a0
received block 00000d90d253d8adb9a0
ProcessBlock: ORPHAN BLOCK, prev=0000079789de3031432f
received block 0000079789de3031432f
ProcessBlock: ORPHAN BLOCK, prev=000000d177c1d8b9c30c
received block 000000d177c1d8b9c30c
ProcessBlock: ORPHAN BLOCK, prev=0000073aa173b5d0aaa5
received block 0000073aa173b5d0aaa5
ProcessBlock: ORPHAN BLOCK, prev=00000ed7bfbe7891669f
received block 00000ed7bfbe7891669f
ProcessBlock: ORPHAN BLOCK, prev=00000bd934e4adb67c3b
received block 00000bd934e4adb67c3b
ProcessBlock: ORPHAN BLOCK, prev=00000f4e1d77c37bd652
To make it simple, I suggest that you upload your blockchain data to dropdox or mega so that everyone can sync properly and move the network together.
You'll just need to upload these 3 files:
blk0001.dat
blkindex.dat
and also the file inside the folder "database"
You may zip these files before you upload them and then post the download link here. Thanks again.
Jump to: