I just finish with the setup... 6x RX 570 4 GB ( 7300-7400 sol/s each card, is it ok ?) , all stable for now. Lets se what will happen in next 24 hours.
Btw my old nvidia GeForce GTX 970 10224 sol/s
RX 560 4 GB 4300 sol/s
Topic: [ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22) - page 19. (Read 30771 times)
March 18, 2018, 03:10:45 PM
March 18, 2018, 12:48:32 PM
Try to start at clock 0, power target 75% and 0 mem and then increase slowly mem when you see the config is stable.
I tried to start in stock, e.g. 0 clock and 0 mem. Problem still here. WIN10x64 March 18, 2018, 12:19:36 PM
How can I set temp limit in this miner?
This is plainly not possible - use power target in your driver to monitor abd set temperatures.
I have the same issue trying to run a 4x 1080ti rig stock, except mine just keeps running at 0 (maybe I killed it before it crashed though), no errors, just goes from 20k sols/card to 0.
Once and a while it will run for a bit but will crash if it looses connection (not sure why it lost connection, all the other rigs on that switch are still hashing away with no problems).
Once and a while it will run for a bit but will crash if it looses connection (not sure why it lost connection, all the other rigs on that switch are still hashing away with no problems).
I had many reports that the 0 sols appear more often when increasing OC. lolMiner utilizes and stresses card a lot and 0 sols is an indicator that the card failed in completing its task properly and the miner stops there because the complete event is never called.
Try to start at clock 0, power target 75% and 0 mem and then increase slowly mem when you see the config is stable.
deskop remote pls
demo claymore
demo claymore
Can you describe more in detail what feat you like to have?
March 18, 2018, 11:45:54 AM
deskop remote pls
demo claymore
demo claymore
March 18, 2018, 10:39:40 AM
After working 30s goes to 0 Sol/s and than crashes. 3x1070 + 3x1080 works in stock...
I have the same issue trying to run a 4x 1080ti rig stock, except mine just keeps running at 0 (maybe I killed it before it crashed though), no errors, just goes from 20k sols/card to 0.
Once and a while it will run for a bit but will crash if it looses connection (not sure why it lost connection, all the other rigs on that switch are still hashing away with no problems).
March 18, 2018, 09:20:16 AM
How can I set temp limit in this miner?
March 18, 2018, 07:35:19 AM
i have same "problem", but I'm lucky because i dont want to use rx 580... So same rig with amd and nvidia, and it only detects nvidia..
--list-devices do not work. It keeps runing command prompt again and again, over and over (shut down then start, shut down then start). but miner works fine, when start mining and only detecting nvidia..
--list-devices do not work. It keeps runing command prompt again and again, over and over (shut down then start, shut down then start). but miner works fine, when start mining and only detecting nvidia..
A quick cite from the lolMiner_readme.pdf:
P.S. I hope the stability of Windows improves...
I hope so, too ^^ Waiting for new Ubuntu to come out - then I can set up new Windows build chain with updates runtime libraries - hope that this helps improving stability.
March 18, 2018, 05:57:38 AM
Hello, Lolliedieb.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.
It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.
It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.
v0.31 and others before it work great and stable for me, however I am running Ubuntu Linux and I would guess you are using Windows.
The code is developed and compiled on Linux so it will always perform better on that operating system, so if stability is so important to you I suggest you upgrade your OS
I am going to use Linux, but is Ubuntu installed on USB OK?
P.S. I hope the stability of Windows improves...
March 18, 2018, 05:41:48 AM
so take it and try it.
And learn how to read readme and help
And learn how to read readme and help
March 18, 2018, 05:41:18 AM
Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
what is the output from the "--list-devices" command or have you not tried this yet?
Hi, I have not tried it. I do not know how it works.
i have same "problem", but I'm lucky because i dont want to use rx 580... So same rig with amd and nvidia, and it only detects nvidia..
--list-devices do not work. It keeps runing command prompt again and again, over and over (shut down then start, shut down then start). but miner works fine, when start mining and only detecting nvidia..
March 18, 2018, 03:44:42 AM
Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
what is the output from the "--list-devices" command or have you not tried this yet?
Hi, I have not tried it. I do not know how it works.
March 18, 2018, 02:42:14 AM
Hi guys.
I have 12 x RX580. I tried to mine minex. I got 9k hashrate per GPU. I think it's poor hashrate. Could you please share me your bat file? I don't know how i can edit my bat file.I read example config but didn't. Thank you very much.
I have 12 x RX580. I tried to mine minex. I got 9k hashrate per GPU. I think it's poor hashrate. Could you please share me your bat file? I don't know how i can edit my bat file.I read example config but didn't. Thank you very much.
do you not know how to use notepad?
and have you read the readme?
March 18, 2018, 02:40:16 AM
Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
what is the output from the "--list-devices" command or have you not tried this yet?
March 18, 2018, 02:37:09 AM
Hello, Lolliedieb.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.
It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.
It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.
v0.31 and others before it work great and stable for me, however I am running Ubuntu Linux and I would guess you are using Windows.
The code is developed and compiled on Linux so it will always perform better on that operating system, so if stability is so important to you I suggest you upgrade your OS
March 17, 2018, 10:20:21 PM
Hello, Lolliedieb.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.
It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.
It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.
March 17, 2018, 09:08:39 PM
Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you
March 17, 2018, 07:48:27 PM
Hi guys.
I have 12 x RX580. I tried to mine minex. I got 9k hashrate per GPU. I think it's poor hashrate. Could you please share me your bat file? I don't know how i can edit my bat file.I read example config but didn't. Thank you very much.
I have 12 x RX580. I tried to mine minex. I got 9k hashrate per GPU. I think it's poor hashrate. Could you please share me your bat file? I don't know how i can edit my bat file.I read example config but didn't. Thank you very much.
March 17, 2018, 03:16:34 PM
and memory +2000 I am getting about 19KSol/s with the 1070 at maximum power (drawing 145W @ 40C currently but in a very cold garage with fan 75%)
Lol, it's world record. 
March 17, 2018, 02:43:39 PM
After working 30s goes to 0 Sol/s and than crashes. 3x1070 + 3x1080 works in stock...
are you overclocking? the 1070 I received today to try out does the same when I push the graphics clock up to +200
otherwise with graphics +150 and memory +2000 I am getting about 19KSol/s with the 1070 at maximum power (drawing 145W @ 40C currently but in a very cold garage with fan 75%)
March 17, 2018, 02:25:04 PM
After working 30s goes to 0 Sol/s and than crashes. 3x1070 + 3x1080 works in stock...
are you overclocking? the 1070 I received today to try out does the same when I push the graphics clock up to +200
otherwise with graphics +150 and memory +2000 I am getting about 19KSol/s with the 1070 at maximum power (drawing 145W @ 40C currently but in a very cold garage with fan 75%)
Jump to: