Topic: [ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22) - page 4. (Read 30771 times)

7950 Hynix with custom timings 10600 Sol/s 1130/1575
280X Elpida custom timings 9500 Sol/s 1160/1750
280X Elpida timings 1160/1800 10900 Sol/s

My Gigagbyte R9280x 3G is hashing at 9800 with 1200/1500 (core/mem) work batch set at 8 and the latest amd driver.

Please upload anybody the 0.1x version for me. Thanks!

BTCP have announced plans for 144/5. Hope you can do that one too! Bitmain sucks donkey balls but it's a good time to be a lolminer, lol.

Because of the positive initial interview results, there's no reason for us NOT to buy more. This s the best time to BUY and PARK. HAPPY PARKINGS GUYS!!!!!!!👍❤️

Because I also got some private messages about that - I just can confirm that I am working on other Equihash variants as well and these include Equi 210/9 (Aion) as well as Equi 192/7 (Zero). But its still some way - the lolMiner concept was very memory hungry to get it up to speed and applying that for these coins is much more harder then for Minex. But this will have also a positive effect for Minexcoin - because I promised that once I switch over to more coins I will lower the fee to 1% for this one

Also I can confirm that I am working on the next version of this one. The updated OpenCL code is already done, currently I am investigating the possibility to ship the kernels in a binary fashion. As an advantage I could compile it for every device in an optimized way and also I can protect my work better from decompiling it that way. Currently I am still a bit shy on that because there may be devices where offline compiling is difficult (e.g. many miners do not support Vega yet because of that) and I do not want to blow the archive size because of so man binary kernels. Lets see if I come up with a proper solution

Hashrates with heavily undervolted and -clocked summer settings: 950/1250 MHz core/mem  @ 970 mV

270 - 4670 sol/s
270x - 4800 sol/s
280x - 8700 sol/s

Hello dev,

Could you have a look to this other variant of equihash please?
https://bitcointalk.org/index.php?topic=3373738.new#new
Equihash 210/9

This could bring you new miners with leveraging on your existing miner...

270 - 4729 sol/s
270x - 5250 sol/s
280x - 9310 sol/s

1000 mV and stock core/mem

Is anyone mining with older r9 cards I have a mix rig with 270,280 and 390's and was wondering how they mined or expected hashrates 

Hmm no... both miners seem to miss the OpenCL driver or the OpenCL ICD ... I think completely re-installing drivers from scratch will solve this.



True, there is none. The Windows watchdog covers most of the Windows runtime bug the miner has, but that are plainly not presend on Linux. The only problem it covers that exist on Linux as well is 0 sol/s, but since Linux does not allow to deactivate a device and reset it completely without reboot that function would not work on Linux. So the simple Linux .sh script almost does all the job the watchdog could do :/


I also think so... the difficulty is far higher now. The nethash was 50 to 65M when 0.13 was out but 0.21 not yet there. Today its 130 to 150 so the income at the moment is only half and less then back then - at same hash rate. To befair 0.34 computes hashes about 15% faster then the 0.1x versions and is more stable. Anyways... there was a seriozs bug in 0.1x versions causing trouble on pool side. If its ok for you give me a bit and I will put a kind of 0.13b version with that bug patched out here.

I can't seem to find the watchdog for Linux in this thread, nor did it come with 0.34?

Hi.

I was using lolMiner v030 for days (even months) on Suprnova pool.

Today, want to give a try on Minexpool and I upgrade to v034

But now I have segmentation fault when I start a miner, with v030 AND v034 on Minexpool AND Suprnova

I tryed v022 on Minexpool but : Error: There is noch such platform on this device

I'm running on Linux.

Don't know if it's helpfull but when I try to run OptiMiner, I have this error :

[2018-04-28 09:58:51.765] [default] [info] Optiminer/Equihash 2.1.1 (C) Optiminer 2017
[2018-04-28 09:58:51.765] [default] [info] Connecting to mnx.suprnova.cc:7077.
[2018-04-28 09:58:51.794] [default] [error] OpenCL error: Failed to list OpenCL platforms! (Unknown OpenCL error -1001)

Maybe it's an hardward problem but graphics cards are listed with lspci :

01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
02:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
03:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
05:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)

And with nvidia-smi :


I didn't change my overcolck settings for a while.

What can I do ?

Thanks.

EDIT : Maybe my USB stick is corrupted because when I try to remove overclock settings, I get :

./nvidia-overclock.sh

ERROR: libatk-1.0.so.0: wrong ELF class: ELFCLASS32
       libnvidia-gtk3.so: cannot open shared object file: No such file or directory
       libatk-1.0.so.0: wrong ELF class: ELFCLASS32
       libnvidia-gtk2.so: cannot open shared object file: No such file or directory


ERROR: A problem occured when loading the GUI library. Please check your installation and library path. You may need to specify this library when calling nvidia-settings. Please run
       `nvidia-settings --help` for usage information.

As I'm running on a dedicated USB Linux distribution, I will try to make a new stick from scratch.

does anyone have lolminer 0.34 without watchdog, i cant get it to work with amd and nvidia even separated

Wouldn't this have more to do with the change in difficulty as opposed to the miner itself?

With the old version 2-3x more coin mined as the new one. Please upload the old versios if you can. I want to try it again. Thanks!

Do you do this in Windows? If yes with or without the watchdog? The watchdog is not really prepared for two miner instances at the same time, so running without may be an option.

I'm currently mining on 4 nvidia cards and 1 amd card on the same system with no issues. I'm sure there is something minor that you're missing (I lose my pen while holding it sometimes too).
Just look over your cfg and batch files. You might try specifying an exact file path (c:\. . . . . \ . . . config.cfg) of the cfgs in the bat so you know for sure there isn't a mixup.

i'm using this, but if i start first mining on nvidia, when i start mining amd, nvidia freezes. its the same whenever i try to run mining on 2 diffirent devices. If i set mining on all amd, computer freezes and restarts. strange!

For now there is no possibility to run 2 instances, one would kill other one....

any solutions?

thank you

this coin is obviously failing the past week.  Btc and most alts are way up. Mnx has lost value of more than 50000 satoshis.
Where are the buy orders from the bank as stated in the white paper?