Topic: [ANN] Miner Control 1.6.1 - Auto profit switching miner controller - page 12. (Read 164300 times)
March 09, 2017, 03:28:25 AM
that's right.good pool.the thing is you can't see btc--->usd balances.aaand every 3 hours there are auto withdrawals.that's good and bad for me.good - i don't need to enter the pool and push this withdrawals.bad - i can't grab some statistics about the pool.
March 08, 2017, 06:55:35 PM
On the Yiimp homepage:
"DO NOT USE a BTC address here, the auto exchange is disabled!"
Anyone know when they will have auto exchange back up? Never used them before but would like to give them a try if they have auto exchange.
"DO NOT USE a BTC address here, the auto exchange is disabled!"
Anyone know when they will have auto exchange back up? Never used them before but would like to give them a try if they have auto exchange.
They don't do auto-exchange. Never have as far as I can remember.
I have never tried to use them with Miner Control, but my guess is you would have to put the different coin addresses in the config file for each algo you are mining. Then have it go to Bittrex or another exchange and then do the auto exchange or do the trading yourself.
March 08, 2017, 04:19:12 PM
On the Yiimp homepage:
"DO NOT USE a BTC address here, the auto exchange is disabled!"
Anyone know when they will have auto exchange back up? Never used them before but would like to give them a try if they have auto exchange.
"DO NOT USE a BTC address here, the auto exchange is disabled!"
Anyone know when they will have auto exchange back up? Never used them before but would like to give them a try if they have auto exchange.
March 08, 2017, 03:34:48 PM
New update is looking great. Thanks!
March 08, 2017, 03:24:13 PM
yepp.wtm+mph - works nice finally=)
aaand next question - btc balances for yiimp - possible?
Unfortunately, no. There is no centralised source for exchange rates on YIIMP. aaand next question - btc balances for yiimp - possible?
March 08, 2017, 02:37:05 PM
yepp.wtm+mph - works nice finally=)
aaand next question - btc balances for yiimp - possible?
aaand next question - btc balances for yiimp - possible?
March 08, 2017, 12:48:27 PM
so?new update, right?
any news about balances after upgrade?
update.seems like MPH api doesn't work at all.no speed in MC too...
any news about balances after upgrade?
update.seems like MPH api doesn't work at all.no speed in MC too...
Package updated.
Fix for MPH with WTM profitability. Balance and speed are working now without any changes from my side.
+ ccminer Tpruvot 2.0.
+ Claymore Zcash 12.3
Link1:
https://drive.google.com/open?id=0Bz8-ln3QUcV4U3kzVXFzMUI0VUE
Link2:
https://mega.nz/#F!rhAFCbIa!F4XoHfIYoPYgJ-V1TUyP2A
March 08, 2017, 07:31:13 AM
as we wait now there is one more question - why new column top speed?maybe more interesting would be avgspeed?
March 08, 2017, 06:08:57 AM
March 08, 2017, 03:17:20 AM
so?new update, right?
any news about balances after upgrade?
update.seems like MPH api doesn't work at all.no speed in MC too...
any news about balances after upgrade?
update.seems like MPH api doesn't work at all.no speed in MC too...
March 08, 2017, 03:11:08 AM
aaand MPH DGB-skein only zero in earnings,prices and other.
with pricewtm:false - works fine sooo.some sort of no price with WTM i guess...
Code:
"minprofit": 1.1,
"logactivity": true,
"donationfrequency" : 1440,
"gridsortmode": 2,
"minerkillmode": 0,
"traymode": 0,
"wtmbuffer": true,
"wtmsyncperiod": 1,
"wtmextracoins":true,
"remotesend": false,
"remotereceive": false,
"minerfolderpath": "MinerControl"
"nospeed": false,
"nospeedworker": false,
"autofee": true,
"pricewtm": true,
"balancemode": 0,
"weight": 1.0,
"minprofit": 1,
"btcfee": 0.2,
"sparam1": "hub.miningpoolhub.com",
{ "active":true, "cname": "digibyte-skein", "algo": "skein","priceid": "114","tag":"dgb", "folder": "_APARAM1_", "cweight": 1, "fee": 0.9, "command": "_APARAM2_", "arguments": "_APARAM3_ _SPARAM3__SPARAM1_:20527 -u _ACCOUNT_._WORKER_ _SPARAM2_ -i 27 -q" },
The reason here is that MPH names the coin digibyte-skein, WTM as DGB-skein. I'll link it to PriceId, thanks.
March 08, 2017, 02:27:40 AM
aaand MPH DGB-skein only zero in earnings,prices and other.
with pricewtm:false - works fine sooo.some sort of no price with WTM i guess...
Code:
"minprofit": 1.1,
"logactivity": true,
"donationfrequency" : 1440,
"gridsortmode": 2,
"minerkillmode": 0,
"traymode": 0,
"wtmbuffer": true,
"wtmsyncperiod": 1,
"wtmextracoins":true,
"remotesend": false,
"remotereceive": false,
"minerfolderpath": "MinerControl"
"nospeed": false,
"nospeedworker": false,
"autofee": true,
"pricewtm": true,
"balancemode": 0,
"weight": 1.0,
"minprofit": 1,
"btcfee": 0.2,
"sparam1": "hub.miningpoolhub.com",
{ "active":true, "cname": "digibyte-skein", "algo": "skein","priceid": "114","tag":"dgb", "folder": "_APARAM1_", "cweight": 1, "fee": 0.9, "command": "_APARAM2_", "arguments": "_APARAM3_ _SPARAM3__SPARAM1_:20527 -u _ACCOUNT_._WORKER_ _SPARAM2_ -i 27 -q" },
March 08, 2017, 01:05:26 AM
MPH upgrading web servers and now balances are not displayed.will you contact to them to fix this issue?
March 07, 2017, 04:42:07 PM
Uploading just finished. Links added.
Thank you this is amazing work well done !
Regards
#Nemo
March 07, 2017, 04:28:59 PM
Uploading just finished. Links added.
March 07, 2017, 04:13:33 PM
Package updated. Beta 5 now.
Link1:
Link2:
Claymore ZCash miner v.12.2
EWBF Zcash miner v.0.3.1b
CPUminer-opt-3.5.12-windows
1) Added WTM Buffer. Radically reduces amount of API requests to WhatToMine and accelerates total refresh speed.
It reads the prices from WhatToMine with adjustable frequency. New keys in "general" block:
"wtmsyncperiod": 3, time in minutes to refresh WTM prices, by default 3 minutes
"wtmbuffer": true, enables or disables WTM Buffer. By default enabled.
"wtmextracoins":true, enables prices for coins not included in basic list of WTM. By default enabled. If disabled, prices for coins with "PriceID" in algo section will not be accuired (beta2).
2) For pools with self-defined profitabillity added possibility to switch to WTM-based prices. New key in "pool" section:
"pricewtm": true by default is false.
3) AikaPool attached.
4) New algos for YIIMP and Zpool.
5) Comparison for hashrates predefined/real and marking the difference with colores. Color intensity for undervaluted rates moves to red, overvaluated to yellow, difference +/- 5% of predefined is green. Test feature will be developed further.
great upgrade.but where are the links?=)Link1:
Link2:
Claymore ZCash miner v.12.2
EWBF Zcash miner v.0.3.1b
CPUminer-opt-3.5.12-windows
1) Added WTM Buffer. Radically reduces amount of API requests to WhatToMine and accelerates total refresh speed.
It reads the prices from WhatToMine with adjustable frequency. New keys in "general" block:
"wtmsyncperiod": 3, time in minutes to refresh WTM prices, by default 3 minutes
"wtmbuffer": true, enables or disables WTM Buffer. By default enabled.
"wtmextracoins":true, enables prices for coins not included in basic list of WTM. By default enabled. If disabled, prices for coins with "PriceID" in algo section will not be accuired (beta2).
2) For pools with self-defined profitabillity added possibility to switch to WTM-based prices. New key in "pool" section:
"pricewtm": true by default is false.
3) AikaPool attached.
4) New algos for YIIMP and Zpool.
5) Comparison for hashrates predefined/real and marking the difference with colores. Color intensity for undervaluted rates moves to red, overvaluated to yellow, difference +/- 5% of predefined is green. Test feature will be developed further.
They were there when this was originally posted so maybe something needs to be changed with the files
March 07, 2017, 04:10:01 PM
Package updated. Beta 5 now.
Link1:
Link2:
Claymore ZCash miner v.12.2
EWBF Zcash miner v.0.3.1b
CPUminer-opt-3.5.12-windows
1) Added WTM Buffer. Radically reduces amount of API requests to WhatToMine and accelerates total refresh speed.
It reads the prices from WhatToMine with adjustable frequency. New keys in "general" block:
"wtmsyncperiod": 3, time in minutes to refresh WTM prices, by default 3 minutes
"wtmbuffer": true, enables or disables WTM Buffer. By default enabled.
"wtmextracoins":true, enables prices for coins not included in basic list of WTM. By default enabled. If disabled, prices for coins with "PriceID" in algo section will not be accuired (beta2).
2) For pools with self-defined profitabillity added possibility to switch to WTM-based prices. New key in "pool" section:
"pricewtm": true by default is false.
3) AikaPool attached.
4) New algos for YIIMP and Zpool.
5) Comparison for hashrates predefined/real and marking the difference with colores. Color intensity for undervaluted rates moves to red, overvaluated to yellow, difference +/- 5% of predefined is green. Test feature will be developed further.
great upgrade.but where are the links?=) Link1:
Link2:
Claymore ZCash miner v.12.2
EWBF Zcash miner v.0.3.1b
CPUminer-opt-3.5.12-windows
1) Added WTM Buffer. Radically reduces amount of API requests to WhatToMine and accelerates total refresh speed.
It reads the prices from WhatToMine with adjustable frequency. New keys in "general" block:
"wtmsyncperiod": 3, time in minutes to refresh WTM prices, by default 3 minutes
"wtmbuffer": true, enables or disables WTM Buffer. By default enabled.
"wtmextracoins":true, enables prices for coins not included in basic list of WTM. By default enabled. If disabled, prices for coins with "PriceID" in algo section will not be accuired (beta2).
2) For pools with self-defined profitabillity added possibility to switch to WTM-based prices. New key in "pool" section:
"pricewtm": true by default is false.
3) AikaPool attached.
4) New algos for YIIMP and Zpool.
5) Comparison for hashrates predefined/real and marking the difference with colores. Color intensity for undervaluted rates moves to red, overvaluated to yellow, difference +/- 5% of predefined is green. Test feature will be developed further.
March 07, 2017, 03:45:03 PM
Package updated. Beta 5 now.
Link1:
https://drive.google.com/open?id=0Bz8-ln3QUcV4U3kzVXFzMUI0VUE
Link2:
https://mega.nz/#F!rhAFCbIa!F4XoHfIYoPYgJ-V1TUyP2A
Claymore ZCash miner v.12.2
EWBF Zcash miner v.0.3.1b
CPUminer-opt-3.5.12-windows
1) Added WTM Buffer. Radically reduces amount of API requests to WhatToMine and accelerates total refresh speed.
It reads the prices from WhatToMine with adjustable frequency. Pools get profitability data from buffer. New keys in "general" block:
"wtmsyncperiod": 3, time in minutes to refresh WTM prices, by default 3 minutes
"wtmbuffer": true, enables or disables WTM Buffer. By default enabled.
"wtmextracoins":true, enables prices for coins not included in basic list of WTM. By default enabled. If disabled, prices for coins with "PriceID" in algo section will not be accuired (beta2).
2) For pools with self-defined profitabillity added possibility to switch to WTM-based prices. New key in "pool" section:
"pricewtm": true by default is false.
3) AikaPool attached.
4) New algos for YIIMP and Zpool.
5) Comparison for hashrates predefined/real and marking the difference with colores. Color intensity for undervaluted rates moves to red, overvaluated to yellow, difference +/- 5% of predefined is green. Test feature will be developed further.
Link1:
https://drive.google.com/open?id=0Bz8-ln3QUcV4U3kzVXFzMUI0VUE
Link2:
https://mega.nz/#F!rhAFCbIa!F4XoHfIYoPYgJ-V1TUyP2A
Claymore ZCash miner v.12.2
EWBF Zcash miner v.0.3.1b
CPUminer-opt-3.5.12-windows
1) Added WTM Buffer. Radically reduces amount of API requests to WhatToMine and accelerates total refresh speed.
It reads the prices from WhatToMine with adjustable frequency. Pools get profitability data from buffer. New keys in "general" block:
"wtmsyncperiod": 3, time in minutes to refresh WTM prices, by default 3 minutes
"wtmbuffer": true, enables or disables WTM Buffer. By default enabled.
"wtmextracoins":true, enables prices for coins not included in basic list of WTM. By default enabled. If disabled, prices for coins with "PriceID" in algo section will not be accuired (beta2).
2) For pools with self-defined profitabillity added possibility to switch to WTM-based prices. New key in "pool" section:
"pricewtm": true by default is false.
3) AikaPool attached.
4) New algos for YIIMP and Zpool.
5) Comparison for hashrates predefined/real and marking the difference with colores. Color intensity for undervaluted rates moves to red, overvaluated to yellow, difference +/- 5% of predefined is green. Test feature will be developed further.
March 04, 2017, 04:15:50 PM
ok.if it's not possible to see WTM balances is it possible to replace MPHs profitability table with WTM?cause it's sooo slow...sometimes i mine skein or ftc for 30-40 mins but the last 15-20 mins they are twice as not profitable...in same time MPH dashboard tells me that diff rises, but norm.profit table showing old data with high profitability.
Yes, I can make a selection for MPH, which profit calculations to use, their own or WTM-based. March 04, 2017, 04:13:54 PM
ok.if it's not possible to see WTM balances is it possible to replace MPHs profitability table with WTM?cause it's sooo slow...sometimes i mine skein or ftc for 30-40 mins but the last 15-20 mins they are twice as not profitable...in same time MPH dashboard tells me that diff rises, but norm.profit table showing old data with high profitability.
Yes, I can make a selection for MPH, which profit calculations to use, their own or WTM-based. Jump to: