Hey!
Anyone tested it? Any issues found? Any suggestions for further development?
Regards,
ChekaZ
Topic: [ANN] MinerX - NeoScrypt MiningTool (Read 9458 times)
MinerX got updated to Version 3.1!
Whats new?
Cgminer got replaced with Sgminer - Hashrate drasticly improved!
Some minor updates on the Specc configs.
In order to run everything smooth with 3.1 I suggest to install AMD 14.6 RC2 Drivers. Otherwise R9 280 - R9 290x may give you HW errors.
Download links and additional information are provided in the MainPost.
Regards,
ChekaZ
Whats new?
Cgminer got replaced with Sgminer - Hashrate drasticly improved!
Some minor updates on the Specc configs.
In order to run everything smooth with 3.1 I suggest to install AMD 14.6 RC2 Drivers. Otherwise R9 280 - R9 290x may give you HW errors.
Download links and additional information are provided in the MainPost.
Regards,
ChekaZ
Hi, Awesome work man & great news with the 80% increase!
Do you have any plans for adding stratum support in - like an "advanced" tab where one could set url, port, user, password,
so it could be used to mine any coin that uses NeoScrypt.
There are more and more altcoins coming out that use it & finding a good miner is rather hard. There is a good amount of profit in
mining & selling new altcoins when they start up, often more than you can make with FTC. I think the interest for your miner would
spike up if one could use it for this.
Also, how hard it is to add support for mobile video cards? Do you have any plans of doing it?
Do you have any plans for adding stratum support in - like an "advanced" tab where one could set url, port, user, password,
so it could be used to mine any coin that uses NeoScrypt.
There are more and more altcoins coming out that use it & finding a good miner is rather hard. There is a good amount of profit in
mining & selling new altcoins when they start up, often more than you can make with FTC. I think the interest for your miner would
spike up if one could use it for this.
Also, how hard it is to add support for mobile video cards? Do you have any plans of doing it?
There is already such a function implemented. You just need to check the
- Expert Checkbox
- There you can enter your own commandline and start the miner with it. Every NeoScrypt coin is supported in that way.
Github is updated, sorry for the delay, more testing needs to be done. But next version will be out this week.
Regards,
ChekaZ
Hi, Awesome work man & great news with the 80% increase!
Do you have any plans for adding stratum support in - like an "advanced" tab where one could set url, port, user, password,
so it could be used to mine any coin that uses NeoScrypt.
There are more and more altcoins coming out that use it & finding a good miner is rather hard. There is a good amount of profit in
mining & selling new altcoins when they start up, often more than you can make with FTC. I think the interest for your miner would
spike up if one could use it for this.
Also, how hard it is to add support for mobile video cards? Do you have any plans of doing it?
Do you have any plans for adding stratum support in - like an "advanced" tab where one could set url, port, user, password,
so it could be used to mine any coin that uses NeoScrypt.
There are more and more altcoins coming out that use it & finding a good miner is rather hard. There is a good amount of profit in
mining & selling new altcoins when they start up, often more than you can make with FTC. I think the interest for your miner would
spike up if one could use it for this.
Also, how hard it is to add support for mobile video cards? Do you have any plans of doing it?
Mainpost updated:
New .jar (MinerX_Alpha_3.03.jar)
Fixed the bug that China were always shown as offline.
Mature update on the way with new configs and the new Miner bei Wolf0. - 80% improved Hashrate incoming.
Regards,
ChekaZ
New .jar (MinerX_Alpha_3.03.jar)
Fixed the bug that China were always shown as offline.
Mature update on the way with new configs and the new Miner bei Wolf0. - 80% improved Hashrate incoming.
Regards,
ChekaZ
ChekaZ rocks!
Update:
MinerX_Alpha_3.01 is out.
New:
Minor changes on configs and PoolConnections
Regards,
ChekaZ
MinerX_Alpha_3.01 is out.
New:
Minor changes on configs and PoolConnections
Regards,
ChekaZ
Good work sir.
Wanna try it out. Can anyone advise if it is worth to try with only one radeon 270x card?
Actually it doesnt matter how many cards you've got. You can test it, but you wont get anything out of it right now. Feathercoin is switching to NeoScrypt at the 24th of october ~ Block 432000 until then it connects to the testnets.
Regards,
ChekaZ
Good work sir.
Wanna try it out. Can anyone advise if it is worth to try with only one radeon 270x card?
Good work sir.
New Designs added (Thanks to iawgoM)
Then update the pic in OP
Just updated!
Mainpost is updated!
Configs are not optimized but every AMD and NVIDIA Card is supported!
Added new Regions - Europe/US/China are available
Its still in Testingphase, so please report all Bugs
Regards,
ChekaZ
New Designs added (Thanks to iawgoM)
Then update the pic in OP
Code is pushed on Github.
New:
NeoScrypt Ready
MultiGPU (AMD only) - Not yet activated
New Designs added (Thanks to iawgoM)
Dogecoin removed
Final push coming before Feathercoin switches to NeoScrypt
Regards,
ChekaZ
New:
NeoScrypt Ready
MultiGPU (AMD only) - Not yet activated
New Designs added (Thanks to iawgoM)
Dogecoin removed
Final push coming before Feathercoin switches to NeoScrypt
Regards,
ChekaZ
MinerX is ready for NeoScrypt! Code is done, just need to push the latest built to github.
Would be great if anyone would help to test out NeoScrypt configs and post them here:
https://forum.feathercoin.com/index.php?%2Ftopic%2F7816-neoscrypt-gpu-testers-wanted-for-minerx%2F
Thanks a lot!
Regards,
ChekaZ
Would be great if anyone would help to test out NeoScrypt configs and post them here:
https://forum.feathercoin.com/index.php?%2Ftopic%2F7816-neoscrypt-gpu-testers-wanted-for-minerx%2F
Thanks a lot!
Regards,
ChekaZ
NeoScrypt Miner looks good so far. Its still in the TestingPhase but the next MinerX update will contain multi-gpu (AMD Only) and NeoScrypt.
Good work sir.
What would you like to see added to MinerX?
Iam right now implementing multigpu support 1-3 GPUs.
If you got any suggestions, feel free to post them in here.
Iam right now implementing multigpu support 1-3 GPUs.
If you got any suggestions, feel free to post them in here.
Is it support Neoscrypt ?
As soon as Feathercoin implements NeoScrypt, Iam adding the support for it.
The user interface looks nice and colorful.
Does it support all algorithms?
Does it support all algorithms?
Right now its only for Scrypt.
The user interface looks nice and colorful.
Does it support all algorithms?
Does it support all algorithms?
Not yet as Feathercoin has not moved to the new algo yet. :-) and Neoscrypt is still in beta development
Jump to: