[ANN]**** NEW THEKEV VERTMINER ****Ultimate Vertminer guide for Windows****

treasure9

newbie

Activity: 56

Merit: 0

Has anyone used latest vertminer?
I noticed that it shows 225 Mhs for my 6x1070 setup, and whenever i overclock or use stock settings - this number doesn't change.
However the pool is showing 184Mhs

wareck

member

Activity: 238

Merit: 10

Hi
can you update the dropbox link
This one is dead

Thanks

Olivier

mison

full member

Activity: 224

Merit: 250

Hi, I have 3x R9 290, but when I run it, all GPU are set to off mode. Can you help a little?

{
"pools" : [
   {
      "url" : "stratum+tcp://my pool",
      "user" : "my user",
      "pass" : "my password

]
,
"rawintensity" : "5120",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "6336",
"temp-cutoff" : "90",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0",
"shaders" : "1280",
"scrypt-vert" : true
}

mixan

legendary

Activity: 966

Merit: 1000

TRUMP IS DOING THE BEST! MAKE AMERICA GREAT AGAIN!

doing just above 750kh/s with two XFX 7970s after a few days of tweaking

crostorm

newbie

Activity: 32

Merit: 0

so,does any get max hashrate with this miner? I getting less than half on my 2 7850s,tried couple different sttings

corather

legendary

Activity: 1708

Merit: 1000

Solarcoin.org

Compiled vertminer for ubuntu 12.10. All I get are rejects.

Huh

asprin

newbie

Activity: 37

Merit: 0

I have 4x Gigabyte 270x and I'm getting 240Kh/s per card with scrypt-n. I was getting 500Kh/s with just scrypt.

dmfree88

member

Activity: 109

Merit: 10

I just wanted to say sorry for not popping in and helping out much guys. I have had a rough few months. I moved twice and I just recently lost my job. I did however manage to re gain a job within the same week but at less pay. Its been a struggle. The main reason I popped in is I want to give a special thanks to whoever donated 45 vert a couple weeks ago. I received very few donations since I started this thread (1 or 2 vert here and there maybe 10 total asside from 2 specific donations) and really didn't expect to see anything in my wallets when I checked them last week. I hadn't pulled them up in a while and haven't even been able to mine much lately. So I was extremely happy to see I had that in there it really helped out. Without that Id be hungry right now as I am still waiting for my first paycheck so again thank you very much. This donation and one other donation I received in the past that helped me fix my car has really helped me survive. The vertcoin community is by far the most giving. I am very happy to be a part of it I will do my best to make appearances more often. Thanks again guys for helping me out <3

dE_logics

hero member

Activity: 686

Merit: 500

I get 100% hardware errors with this --

Code:

/vertminer -o 192.168.1.2:9041 -u test -p test --nscrypt --scan-time 1 -I 12

In case of bit of history, with cgminer I get 100% hardware errors, that's why I use reaper. sgminer works fine.

vertminer is a direct fork of cgminer, it has inherited the bug.

vnplasma

newbie

Activity: 25

Merit: 0

I have 4 VGA ASUS R9 270x. Any have config for Caicoin pls? My config have so many HW. I run over file *.bat, then pls config for file *.bat. Thanks

PurpleRig

newbie

Activity: 1

Merit: 0

Hi

Thank you for the best advice out there regarding the new setup and settings for VertCoin.
I currently have around 20 MH of GPU's mix of R9 280X R9 290 and R9 290X

I would love to donate a weeks worth of hashing power to anyone that can assist me with setting up my 5 rigs and tweaking for optimum performance for Vertcoin.

Please contact me on skype byron.chadband or email [email protected] or reply here I will try keep it open and check to see if any takers :-)

stoner19

hero member

Activity: 752

Merit: 500

What an awesome thread. Thank you! Looking forward to starting this. I'm still very new to mining, so I'm hoping someone will be able to assist a bit. I have the option of using 1 Nvidia Quadro FX 3700 or I can use 2 Quadro FX 3500. any thoughts/suggestions on this? Thanks!

landkaoss

newbie

Activity: 32

Merit: 0

304kh stable with "0" HW error, Saphire 7950.
has anyone got more? I have heard of a kernel "zuikkis" and up to 330kh, it´s Possible?

"intensity" : "19",
"thread-concurrency" : "19713",
"worksize" : "256",
"lookup-gap" : "2",
"temp-cutoff" : "90",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0",
"shaders" : "1792",
"scrypt-vert" : true,

"gpu-engine" : "1000",
"gpu-fan" : "40-100",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"gpu-vddc" : "1.170",
"temp-cutoff" : "99",
"temp-overheat" : "95",
"temp-target" : "80"
}

whatdidshedo

sr. member

Activity: 448

Merit: 250

hey , i remember you we had a fight on vertcoin sub on reddit , but since i got my first 270 and switched to your miner the results have been great, it is so easy on my gpu and i can ran 30 tabs in chrome along with it, anyway after our fight i did tip you some litlle amount what i had, but now i'm spreading the word and thanks http://www.reddit.com/r/vertcoin/comments/21qhne/i_see_people_mining_hashrates_in_low_200_with/

DeltaQuebec

member

Activity: 84

Merit: 10

Hmm.. that I duno.. I'm no expert & dont wanna give you bad advice :S

Try looking on the regular VTC thread.. I dont see much activity on this forum, but some one may chime in and have some advice, just dont give up, or only run a few GPUS's.. its better than none yano :/

Noelski

newbie

Activity: 16

Merit: 0

I think it could be that its a bran new GPU just 1 day old and is still braking in. Or its this crappy BTC MOBO that will not run with the 2 power molex connecters connected from the mobo to the power supply. It shorts out and will not run when connected. This is the second one in a row that is doing this...

DeltaQuebec

member

Activity: 84

Merit: 10

Same brand & model # GPU's? All with same mem clock @ Core clock & VDC Settings?

Not usre, as Im not a multi-gpu hasher, but if everything, bios, clocks, & vdc and cards are all save, you may be having a voltage drop due to a current draw issue. Im no expert tho, also, are these all spaced out welll with risers or just on the mobo? ( risers work best )

Noelski

newbie

Activity: 16

Merit: 0

THANKSRight out of the gate on rig 3 GPU 0, hashes @ 341.8 kh/s soled and GPU 1, Hashes 310.6 kh/s solid no up or down!!!!

Why would there be a 30 hash difference?

Quote from: DeltaQuebec on March 29, 2014, 06:10:55 PM

Heres my Sapphire R9 280X Dual X Config (340-350KH N-scrypt and usually 280-305 WU )

],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "30",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "2",
"queue" : "0",
"scan-time" : "1",
"auto-fan" : true,
"device" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1000",
"gpu-fan" : "0-85",
"gpu-powertune" : "20",
"gpu-vddc" : "1.225",
"intensity" : "13",
"temp-target" : "73",
"temp-overheat" : "85",
"temp-cutoff" : "90",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"thread-concurrency" : "8160",
"scrypt-vert" : true
}

DeltaQuebec

member

Activity: 84

Merit: 10

Heres my Sapphire R9 280X Dual X Config (340-350KH N-scrypt and usually 280-305 WU )

],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "30",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "2",
"queue" : "0",
"scan-time" : "1",
"auto-fan" : true,
"device" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1000",
"gpu-fan" : "0-85",
"gpu-powertune" : "20",
"gpu-vddc" : "1.225",
"intensity" : "13",
"temp-target" : "73",
"temp-overheat" : "85",
"temp-cutoff" : "90",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"thread-concurrency" : "8160",
"scrypt-vert" : true
}

Noelski

newbie

Activity: 16

Merit: 0

Is anyone out there willing to please help my out?

It was so hard getting CGminer going and now it seems like its a replay....... Sad

This thread was very helpful in getting the program running the only thing that took time to figure out was how to get more then 1 GPU to run. it was ether not clear in the very good instruction or I totally missed it do to my lack of experience.
The best I can get is 260 to 274kh/s on 3 rigs that all get a solid 750 per gpu. I just got 0.5.3 running and I'm having trouble getting up to hash ( hopping for 325 maybe 350k per card)
hardware and configurations fallow.

RIGS 1,2 5 GPU's each
Windows 7 64 bit
MOBO ASUS A88X-PRO FM2+ATX
AMD BOX A6-640K BLK ED
RAM 8 G
GPU's MSI R9280X 3G GDDR5
Power Supply's COOL-MASTER 1000W & 850W

RIG 3 only 2 GPU's so far of 6
Windows 7 64 bit
MOBO Asrock H81 pro BTC
INTEL CELERON G1820
RAM 4 G
GPU's MSI R9280X 3G GDDR5
Power Supply COOL-MASTER 1000W

"VERTMINER-0.5.3"

"intensity" : "13,13,13,13,13",
"worksize" : "256,265,265,265,265",
"lookup-gap" : "2,2,2,2,2",
"thread-concurrency" : "5119,5119,5119,5119,5119",
"temp-cutoff" : "90,90,90,90,90,",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0,1,2,3,4,5",
"shaders" : "2000,2000,2000,2000,2000",
"scrypt-vert" : true
}

Topic: [ANN]**** NEW THEKEV VERTMINER ****Ultimate Vertminer guide for Windows**** (Read 115646 times)

Topic: [ANN] NEW THEKEV VERTMINER Ultimate Vertminer guide for Windows (Read 115646 times)