Hi there,
i already updated my Driver, reinstalled them but my GPU GTX 560Ti isnt listed into NiceHash only my CPU.
In the Log file i see my GPU:
2016-06-19 01:17:47] [INFO] [NICEHASH] Starting up
[2016-06-19 01:17:48] [INFO] [NICEHASH] Total RAM: 8191MB
[2016-06-19 01:17:48] [INFO] [NICEHASH] Page File Size: 3200MB
[2016-06-19 01:17:48] [INFO] [NVIDIA5.x] Detected: GPU #0: SM 2.0 GeForce GTX 560 Ti
[2016-06-19 01:17:49] [INFO] [NVIDIA3.x] Detected: GPU #0: SM 2.0 Gainward GTX 560 Ti
[2016-06-19 01:17:50] [INFO] [NVIDIA2.1] Detected: GPU #0: SM 2.0 Gainward GTX 560 Ti
[2016-06-19 01:17:50] [INFO] [AMD_OpenCL] No AMD GPUs found.
Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 105. (Read 794394 times)
June 22, 2016, 02:38:15 AM
June 21, 2016, 06:46:47 PM
Dear users,
NiceHash Miner v1.6.0.0 released
We strongly recommend all users to update to latest NiceHash Miner version 1.6.0.0.
Version 1.6.0.0 brings:
Download the full package, unzip & run.
Keep on mining!
Best regards,
NiceHash team
NiceHash Miner v1.6.0.0 released
We strongly recommend all users to update to latest NiceHash Miner version 1.6.0.0.
Version 1.6.0.0 brings:
- Increased performance on NVIDIA mining by automatically setting optimized power state.
- Up to 20% faster Decred on NVIDIA GPUs.
- On-GPU DAG generation for DaggerHashimoto for much faster benchmarking and no more HDD needed.
- Added tooltips for relevant config settings.
- Numerous bugfixes and small improvements.
Download the full package, unzip & run.
Keep on mining!
Best regards,
NiceHash team
June 21, 2016, 09:37:32 AM
Hi, I'm trying to buy Expanse mining hash, but it seems to fail. What pool do you recommend?
We are not sure if any pool is yet compatible. We announced to all pools that they should add NiceHash compatibility but not sure if any of them added support yet. If you have some preferred pool for Expanse please contact them and point them to this thread with instructions:
https://forum.ethereum.org/discussion/7346/bounty-for-ethereum-pool-operators-to-add-nicehash-compatibility/p1
it is written for Ethereum pools but the same applies for any pool/coin, based on Dagger-Hashimoto.
Thanks!
June 21, 2016, 07:51:19 AM
Dear users,
Ethereum-only algorithm will be closed and completely replaced with Dagger-Hashimoto algorithm
We introduced Ethereum-only algorithm several months ago. It was an intermediate solution because of the lack of full stratum support in Ethereum miners and pools. A couple of weeks ago we introduced Dagger-Hashimoto algorithm which completely replaces Ethereum-only algortihm. From buyers standpoint Dagger-Hashimoto finally brings the worlds-first option to rent pay-as-you-go hashing power based on Dagger-Hashimoto, allowing you to place orders and mine Ethereum or other compatible coins, for example Expanse. For sellers/miners the Dagger-Hashimoto algorithm introduced higher payouts without the immature/unexchanged balances.
Since Dagger-Hashimoto is now fully stable, supported by several pools as well as Genoi'ls ethminer official latest 1.1.5 release, we will be closing Ethereum-only algorithm. On June 20th at 12:00 UTC we will be closing Ethereum-only algorithm and all miners are of course welcome to use the regular Dagger-Hashimoto algorithm. All the needed instructions to run ethminer on our Dagger-Hashimoto pool are available here.
Please note that all current immature and unexchanged Ethereum-only balances will be process and paid in full after the closure of Ethereum-only algorithm. Therefore you can rest assure that all your earnings are safe, will be paid out and will of course even increase once you switch to the new Dagger-Hashimoto algorithm.
Thank you for using our service!
official press release
Best regards,
NiceHash team
Hi, I'm trying to buy Expanse mining hash, but it seems to fail. What pool do you recommend? Ethereum-only algorithm will be closed and completely replaced with Dagger-Hashimoto algorithm
We introduced Ethereum-only algorithm several months ago. It was an intermediate solution because of the lack of full stratum support in Ethereum miners and pools. A couple of weeks ago we introduced Dagger-Hashimoto algorithm which completely replaces Ethereum-only algortihm. From buyers standpoint Dagger-Hashimoto finally brings the worlds-first option to rent pay-as-you-go hashing power based on Dagger-Hashimoto, allowing you to place orders and mine Ethereum or other compatible coins, for example Expanse. For sellers/miners the Dagger-Hashimoto algorithm introduced higher payouts without the immature/unexchanged balances.
Since Dagger-Hashimoto is now fully stable, supported by several pools as well as Genoi'ls ethminer official latest 1.1.5 release, we will be closing Ethereum-only algorithm. On June 20th at 12:00 UTC we will be closing Ethereum-only algorithm and all miners are of course welcome to use the regular Dagger-Hashimoto algorithm. All the needed instructions to run ethminer on our Dagger-Hashimoto pool are available here.
Please note that all current immature and unexchanged Ethereum-only balances will be process and paid in full after the closure of Ethereum-only algorithm. Therefore you can rest assure that all your earnings are safe, will be paid out and will of course even increase once you switch to the new Dagger-Hashimoto algorithm.
Thank you for using our service!
official press release
Best regards,
NiceHash team
June 20, 2016, 09:15:37 PM
By the way, Is Lyra2RE mined with only CPU?
Why Lyra2REv2 is minerd with GPU, but Lyra2RE isn't?
Why Lyra2REv2 is minerd with GPU, but Lyra2RE isn't?
June 20, 2016, 04:04:54 PM
1) This makes no sense to me so I'm probably missing something. My GPU is producing about $4.00 per day with NHM and my CPU is, at the same time, producing about $0.30. Why would I not want both to be working for me?
3) Settings, NVIDIA5X Oops. Says GPU0, not CPU0. I misread it expecting to see my GPU listed (980 ti).
3) Settings, NVIDIA5X Oops. Says GPU0, not CPU0. I misread it expecting to see my GPU listed (980 ti).
June 20, 2016, 03:52:35 PM
Errors:
1) Starts with CPU benchmarking disabled
2) No language is provided
3) List of NVIDIA5 shows CPU0 instead of GPU
4) Choosing minimize to tray has no effect
1) Starts with CPU benchmarking disabled
2) No language is provided
3) List of NVIDIA5 shows CPU0 instead of GPU
4) Choosing minimize to tray has no effect
Thanks for your input.
1. This is not a bug but by default; usually people don't mine with CPUs if they have GPUs.
2. We are still working on language feature, will be there in final version.
3. Where exactly?
4. Will take a look into this.
June 20, 2016, 02:30:55 PM
Errors:
1) Starts with CPU benchmarking disabled
2) No language is provided
3) List of NVIDIA5 shows CPU0 instead of GPU
4) Choosing minimize to tray has no effect
1) Starts with CPU benchmarking disabled
2) No language is provided
3) List of NVIDIA5 shows CPU0 instead of GPU
4) Choosing minimize to tray has no effect
June 20, 2016, 01:07:43 PM
NOTICE TO ALL NICEHASHMINER USERS
We are very near to release awesome and superbly better NiceHashMiner, the best so far with many cool features such as automatic P0 state setting for NVIDIA cards, on GPU DAG generation for DaggerHashimoto for much faster benchmarkings and no more HDD needed, multilanguage support and many many bug fixes that annoyed many people in the history.
This is a PRE-RELEASE public beta and will be shortly replaced by official one. Use at your own risk. Report us back any issues you may be having. And don't forget to test out some additional options in settings.
DOWNLOAD
We are very near to release awesome and superbly better NiceHashMiner, the best so far with many cool features such as automatic P0 state setting for NVIDIA cards, on GPU DAG generation for DaggerHashimoto for much faster benchmarkings and no more HDD needed, multilanguage support and many many bug fixes that annoyed many people in the history.
This is a PRE-RELEASE public beta and will be shortly replaced by official one. Use at your own risk. Report us back any issues you may be having. And don't forget to test out some additional options in settings.
DOWNLOAD
June 20, 2016, 07:17:55 AM
Im sorry , ,maybe a stupid question.
There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?
If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear. Tried to put it in config.json , same result.
There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?
If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear. Tried to put it in config.json , same result.
This is a known bug and will be fixed in the next version. Thanks for spotting it.
theLosers106.
Ok , Thanks for info. Will be waiting.
This is no bug. Ethminer does not support temperature and fans control flags, and never had not been support ( only supports sgminer)
MSI Afterburner is working ok for me. I set my own temp under "user defined" so that if my rig is running at say 60C, my fan speed is 60 % and if 70C my fan is 70% and so on. It was a bit of pain to set it that way but it's working. Some GPUs can't be set I hear...but give it try.
I'm using MSI Afterburner for now. So you're saying that i can set target temp and MSI A...r can control fans of my GPUs to rich that temp ? I didnt know it. I'm trying to reach my temp by setting fan speed in user graphic mode on some tab. I should look more in its options. Thanks.
Yes- that's the one. .... click on "settings", then the fan tab. Near the top of the tab, check the box to select user defined mode. Then scroll down and to "predefined fab speed curve" and change it to "Custom". Also check the box for " Force fab sped update on each period".
Next, go to the graph and move the four grey boxes to the temps and speed combo you want. Example: you could set the first box at the point for 40 C and the speed at 40 rpm. Repeat this step for the other 3 points until you have the selections you want.
June 20, 2016, 02:23:54 AM
Im sorry , ,maybe a stupid question.
There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?
If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear. Tried to put it in config.json , same result.
There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?
If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear. Tried to put it in config.json , same result.
This is a known bug and will be fixed in the next version. Thanks for spotting it.
theLosers106.
Ok , Thanks for info. Will be waiting.
This is no bug. Ethminer does not support temperature and fans control flags, and never had not been support ( only supports sgminer)
MSI Afterburner is working ok for me. I set my own temp under "user defined" so that if my rig is running at say 60C, my fan speed is 60 % and if 70C my fan is 70% and so on. It was a bit of pain to set it that way but it's working. Some GPUs can't be set I hear...but give it try.
I'm using MSI Afterburner for now. So you're saying that i can set target temp and MSI A...r can control fans of my GPUs to rich that temp ? I didnt know it. I'm trying to reach my temp by setting fan speed in user graphic mode on some tab. I should look more in its options. Thanks.
June 20, 2016, 01:29:57 AM
Dear Nice Hash Team
NiceHashMiner v1.5.1.0 does not work at all for me, when runnung AMD Radeon R9 280 and R9 390 Cards !!!
Win7_64, different Cards and different drivers - all the same !
No Probs with any NVidia Cards.
PanneKopp
Dear users,
Ethereum-only algorithm will be closed and completely replaced with Dagger-Hashimoto algorithm
Thank you for using our service!
official press release
Best regards,
NiceHash team
Ethereum-only algorithm will be closed and completely replaced with Dagger-Hashimoto algorithm
Thank you for using our service!
official press release
Best regards,
NiceHash team
NiceHashMiner v1.5.1.0 does not work at all for me, when runnung AMD Radeon R9 280 and R9 390 Cards !!!
Win7_64, different Cards and different drivers - all the same !
No Probs with any NVidia Cards.
PanneKopp June 20, 2016, 01:28:26 AM
Ok , Thanks for info. Will be waiting.
This is no bug. Ethminer does not support temperature and fans control flags, and never had not been support ( only supports sgminer)
guess ...
I dont like it .....
may be ... Claymore GPUs Control Utility v1.1.zip ..??
link: https://mega.nz/#F!vhB2BCIA!ZuBRI_YyP-SztQnINK6xkA
p.s.
by the way, now XPM gives a big profit.. (http://xpmforall.org)
Thanks for the tip
I'll try it. June 20, 2016, 12:38:05 AM
Ok , Thanks for info. Will be waiting.
This is no bug. Ethminer does not support temperature and fans control flags, and never had not been support ( only supports sgminer)
guess ...
I dont like it .....
What's there not to like?
Afterburner. Its to much only to control fans and temp. I dont need to overclock.
June 18, 2016, 08:29:29 PM
Ok , Thanks for info. Will be waiting.
This is no bug. Ethminer does not support temperature and fans control flags, and never had not been support ( only supports sgminer)
guess ...
I dont like it .....
may be ... Claymore GPUs Control Utility v1.1.zip ..??
link: https://mega.nz/#F!vhB2BCIA!ZuBRI_YyP-SztQnINK6xkA
p.s.
by the way, now XPM gives a big profit.. (http://xpmforall.org)
June 18, 2016, 09:19:24 AM
Ok , Thanks for info. Will be waiting.
This is no bug. Ethminer does not support temperature and fans control flags, and never had not been support ( only supports sgminer)
guess ...
I dont like it .....
What's there not to like?
June 18, 2016, 06:55:29 AM
Hello. I have problems with benchmark of dagger-hashimoto. And without benchmark nicehashminer start to mine on x11 algo.
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] GPU Name (Driver Ver): AMD Radeon (TM) R9 380 Series (15.200.1046.0)
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Adding Ethereum..
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Ethereum GPU MemSize: 2147483648 (GOOD!)
[2016-06-18 09:33:44] [INFO] [NICEHASH] Version get
[2016-06-18 09:33:58] [INFO] [NICEHASH] Bpeмя oжидaния oпepaции иcтeклo
[2016-06-18 09:33:58] [INFO] [NICEHASH] SMA get
[2016-06-18 09:33:59] [INFO] [COINBASE] Bitcoin rate get
[2016-06-18 09:33:59] [INFO] [COINBASE] Current Bitcoin rate: 745.43
[2016-06-18 09:33:59] [INFO] [NICEHASH] Balance get
[2016-06-18 09:33:59] [INFO] [NICEHASH] Setting environment variables
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG directory for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG file for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] CreateDAGFile Arguments: --dag-dir data\AMD_OpenCL --create-dag 1725014
[2016-06-18 09:49:12] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [BENCHMARK] Benchmark starts
[2016-06-18 09:49:13] [INFO] [AMD_OpenCL] Starting benchmark: --opencl --opencl-platform 0 --benchmark-warmup 10 --benchmark-trial 20 --dag-dir data\AMD_OpenCL --opencl-devices 0 --benchmark 1725084
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] GPU Name (Driver Ver): AMD Radeon (TM) R9 380 Series (15.200.1046.0)
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Adding Ethereum..
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Ethereum GPU MemSize: 2147483648 (GOOD!)
[2016-06-18 09:33:44] [INFO] [NICEHASH] Version get
[2016-06-18 09:33:58] [INFO] [NICEHASH] Bpeмя oжидaния oпepaции иcтeклo
[2016-06-18 09:33:58] [INFO] [NICEHASH] SMA get
[2016-06-18 09:33:59] [INFO] [COINBASE] Bitcoin rate get
[2016-06-18 09:33:59] [INFO] [COINBASE] Current Bitcoin rate: 745.43
[2016-06-18 09:33:59] [INFO] [NICEHASH] Balance get
[2016-06-18 09:33:59] [INFO] [NICEHASH] Setting environment variables
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG directory for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG file for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] CreateDAGFile Arguments: --dag-dir data\AMD_OpenCL --create-dag 1725014
[2016-06-18 09:49:12] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [BENCHMARK] Benchmark starts
[2016-06-18 09:49:13] [INFO] [AMD_OpenCL] Starting benchmark: --opencl --opencl-platform 0 --benchmark-warmup 10 --benchmark-trial 20 --dag-dir data\AMD_OpenCL --opencl-devices 0 --benchmark 1725084
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
Here are two reasons:
1. Your HDD is very slow.
2. NHM - full of shit ( in this release v 1.5.1.0 do not work parameters, which could help : "MinerRestartDelayMS", "MinerAPIGraceMinutes", "EthMinerAPIGraceMinutes" and others ... that available in earlier releases worked)
Try to do the following:
1. Open the directory \NiceHashMiner\bin\ethereum\
2. Make it and run the bat file:
Setx GPU_MAX_HEAP_SIZE 100
Setx GPU_USE_SYNC_OBJECTS 1
Setx GPU_MAX_ALLOC_PERCENT 100
Setx GPU_SINGLE_ALLOC_PERCENT 100
timeout 5
ethminer --opencl --opencl-platform 0 --erase-dags old -S daggerhashimoto.eu.nicehash.com:3353 -O
Wait.. .. . until it goes non-zero hashrate's statistics
When will hashrates, close the bat file window and try to run ethminer through NHM (as usual)
......
If this does not work, close the NHM, open the config.json to manually enter the desired speed in the "Benchmarkspeed", again run the NHM and enjoy.
June 18, 2016, 02:26:56 AM
Hello. I have problems with benchmark of dagger-hashimoto. And without benchmark nicehashminer start to mine on x11 algo.
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] GPU Name (Driver Ver): AMD Radeon (TM) R9 380 Series (15.200.1046.0)
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Adding Ethereum..
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Ethereum GPU MemSize: 2147483648 (GOOD!)
[2016-06-18 09:33:44] [INFO] [NICEHASH] Version get
[2016-06-18 09:33:58] [INFO] [NICEHASH] Bpeмя oжидaния oпepaции иcтeклo
[2016-06-18 09:33:58] [INFO] [NICEHASH] SMA get
[2016-06-18 09:33:59] [INFO] [COINBASE] Bitcoin rate get
[2016-06-18 09:33:59] [INFO] [COINBASE] Current Bitcoin rate: 745.43
[2016-06-18 09:33:59] [INFO] [NICEHASH] Balance get
[2016-06-18 09:33:59] [INFO] [NICEHASH] Setting environment variables
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG directory for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG file for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] CreateDAGFile Arguments: --dag-dir data\AMD_OpenCL --create-dag 1725014
[2016-06-18 09:49:12] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [BENCHMARK] Benchmark starts
[2016-06-18 09:49:13] [INFO] [AMD_OpenCL] Starting benchmark: --opencl --opencl-platform 0 --benchmark-warmup 10 --benchmark-trial 20 --dag-dir data\AMD_OpenCL --opencl-devices 0 --benchmark 1725084
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] GPU Name (Driver Ver): AMD Radeon (TM) R9 380 Series (15.200.1046.0)
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Adding Ethereum..
[2016-06-18 09:33:43] [INFO] [AMD_OpenCL] Ethereum GPU MemSize: 2147483648 (GOOD!)
[2016-06-18 09:33:44] [INFO] [NICEHASH] Version get
[2016-06-18 09:33:58] [INFO] [NICEHASH] Bpeмя oжидaния oпepaции иcтeклo
[2016-06-18 09:33:58] [INFO] [NICEHASH] SMA get
[2016-06-18 09:33:59] [INFO] [COINBASE] Bitcoin rate get
[2016-06-18 09:33:59] [INFO] [COINBASE] Current Bitcoin rate: 745.43
[2016-06-18 09:33:59] [INFO] [NICEHASH] Balance get
[2016-06-18 09:33:59] [INFO] [NICEHASH] Setting environment variables
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG directory for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] Creating DAG file for AMD_OpenCL..
[2016-06-18 09:34:27] [INFO] [AMD_OpenCL] CreateDAGFile Arguments: --dag-dir data\AMD_OpenCL --create-dag 1725014
[2016-06-18 09:49:12] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [BENCHMARK] Benchmark starts
[2016-06-18 09:49:13] [INFO] [AMD_OpenCL] Starting benchmark: --opencl --opencl-platform 0 --benchmark-warmup 10 --benchmark-trial 20 --dag-dir data\AMD_OpenCL --opencl-devices 0 --benchmark 1725084
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:13] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
[2016-06-18 09:49:14] [INFO] [NICEHASH] Balance get
June 17, 2016, 06:10:22 PM
At least some news 
i am really satisfied by your service
i am really satisfied by your service June 17, 2016, 05:52:32 PM
Dear users,
Ethereum-only algorithm will be closed and completely replaced with Dagger-Hashimoto algorithm
We introduced Ethereum-only algorithm several months ago. It was an intermediate solution because of the lack of full stratum support in Ethereum miners and pools. A couple of weeks ago we introduced Dagger-Hashimoto algorithm which completely replaces Ethereum-only algortihm. From buyers standpoint Dagger-Hashimoto finally brings the worlds-first option to rent pay-as-you-go hashing power based on Dagger-Hashimoto, allowing you to place orders and mine Ethereum or other compatible coins, for example Expanse. For sellers/miners the Dagger-Hashimoto algorithm introduced higher payouts without the immature/unexchanged balances.
Since Dagger-Hashimoto is now fully stable, supported by several pools as well as Genoi'ls ethminer official latest 1.1.5 release, we will be closing Ethereum-only algorithm. On June 20th at 12:00 UTC we will be closing Ethereum-only algorithm and all miners are of course welcome to use the regular Dagger-Hashimoto algorithm. All the needed instructions to run ethminer on our Dagger-Hashimoto pool are available here.
Please note that all current immature and unexchanged Ethereum-only balances will be process and paid in full after the closure of Ethereum-only algorithm. Therefore you can rest assure that all your earnings are safe, will be paid out and will of course even increase once you switch to the new Dagger-Hashimoto algorithm.
Thank you for using our service!
official press release
Best regards,
NiceHash team
Ethereum-only algorithm will be closed and completely replaced with Dagger-Hashimoto algorithm
We introduced Ethereum-only algorithm several months ago. It was an intermediate solution because of the lack of full stratum support in Ethereum miners and pools. A couple of weeks ago we introduced Dagger-Hashimoto algorithm which completely replaces Ethereum-only algortihm. From buyers standpoint Dagger-Hashimoto finally brings the worlds-first option to rent pay-as-you-go hashing power based on Dagger-Hashimoto, allowing you to place orders and mine Ethereum or other compatible coins, for example Expanse. For sellers/miners the Dagger-Hashimoto algorithm introduced higher payouts without the immature/unexchanged balances.
Since Dagger-Hashimoto is now fully stable, supported by several pools as well as Genoi'ls ethminer official latest 1.1.5 release, we will be closing Ethereum-only algorithm. On June 20th at 12:00 UTC we will be closing Ethereum-only algorithm and all miners are of course welcome to use the regular Dagger-Hashimoto algorithm. All the needed instructions to run ethminer on our Dagger-Hashimoto pool are available here.
Please note that all current immature and unexchanged Ethereum-only balances will be process and paid in full after the closure of Ethereum-only algorithm. Therefore you can rest assure that all your earnings are safe, will be paid out and will of course even increase once you switch to the new Dagger-Hashimoto algorithm.
Thank you for using our service!
official press release
Best regards,
NiceHash team