Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 236. (Read 794394 times)
September 06, 2014, 10:32:24 PM
Are both nicehash & westhash down for anyone else?
September 06, 2014, 06:38:31 PM
I have 60 mh scrypt with asic and i get 40~ accepted MH on Nicehash whether i use vardiff or anything else. I get 50k+ WU. I get 55-60 mh accepted on normals pools.
What gives? I dont have this issue with GPUs, only ASICs.
What gives? I dont have this issue with GPUs, only ASICs.
Can you please tell us which miner are you using (manufacturer+model)?
Are you able to see which version of cgminer is the miner running?
Is the miner reporting any issues / rejects / stale shares or it simply does not reach desired speed?
Are you able to use some other software for this miner (for example, BFGMiner 4.7.0)?
Can you please try to put the miner behind the stratum-proxy and report if it works for you (https://www.nicehash.com/docs/connect-via-proxy/?
And can you please try both NiceHash and WestHash and report if you observe same issues on both systems?
Thanks for the feedback!
cg 4.3.5 and 3.1.1
No issues, low HW, 0.4%reject
Just doesnt reach desired speed (get 60mh on magic pool, 57mh on CM, under 50mh on NH overall)
Gawminers is fucking cryptic about configs to run them, prolly because they want to push us into using their stuff, so i havent been able to make BFG miner work.
Proxy thing sound like a pain to setup on linux and its not a reject or nonce issue so i didnt bother.
It was worse on WestHash, but i think it was because of OMG overhead since WestHash wouldnt let me raise the difficulty.
The issue come and go, it seem to be really bad on low difficulty coins, when i'm on a higher difficulty (i can see that in the stats by less shares) it almost reach desired speed. Last 24 hours average seem to be around 49mh vs 54mh desire, which is not as bad as before.
Thanks for the feedback. Well, if this is the case then there is really not much that we can do. Low difficulty coins with pools that are using low initial share worker difficulties are simply killing hash rate on some ASIC machines (it is similar with fast SHA machnies). But some machines handles loads of low diff shares better then others (it depends on machine's CPU (not asic chip, but CPU) and network interface quality and performance - the ability to process excessive number of shares in a particular period of time).
End-users pool operators are the ones that can help on this matter - they should set initial difficulty for the workers high enough, this way all miners would be able to process all shares, even for coins with low difficulties. We will try to pass this message to pool opeators, but also you can help spread the word with some tweets to various end user pools which are launching new alt coins with low difficulty.
I guess, nothing changed but suddenly its been fine even at low diff. I'm guessing i just hit a good spot, but it would be nice if it stayed like the last hour or so:
September 06, 2014, 05:17:03 PM
I have 60 mh scrypt with asic and i get 40~ accepted MH on Nicehash whether i use vardiff or anything else. I get 50k+ WU. I get 55-60 mh accepted on normals pools.
What gives? I dont have this issue with GPUs, only ASICs.
What gives? I dont have this issue with GPUs, only ASICs.
Can you please tell us which miner are you using (manufacturer+model)?
Are you able to see which version of cgminer is the miner running?
Is the miner reporting any issues / rejects / stale shares or it simply does not reach desired speed?
Are you able to use some other software for this miner (for example, BFGMiner 4.7.0)?
Can you please try to put the miner behind the stratum-proxy and report if it works for you (https://www.nicehash.com/docs/connect-via-proxy/?
And can you please try both NiceHash and WestHash and report if you observe same issues on both systems?
Thanks for the feedback!
cg 4.3.5 and 3.1.1
No issues, low HW, 0.4%reject
Just doesnt reach desired speed (get 60mh on magic pool, 57mh on CM, under 50mh on NH overall)
Gawminers is fucking cryptic about configs to run them, prolly because they want to push us into using their stuff, so i havent been able to make BFG miner work.
Proxy thing sound like a pain to setup on linux and its not a reject or nonce issue so i didnt bother.
It was worse on WestHash, but i think it was because of OMG overhead since WestHash wouldnt let me raise the difficulty.
The issue come and go, it seem to be really bad on low difficulty coins, when i'm on a higher difficulty (i can see that in the stats by less shares) it almost reach desired speed. Last 24 hours average seem to be around 49mh vs 54mh desire, which is not as bad as before.
Thanks for the feedback. Well, if this is the case then there is really not much that we can do. Low difficulty coins with pools that are using low initial share worker difficulties are simply killing hash rate on some ASIC machines (it is similar with fast SHA machnies). But some machines handles loads of low diff shares better then others (it depends on machine's CPU (not asic chip, but CPU) and network interface quality and performance - the ability to process excessive number of shares in a particular period of time).
End-users pool operators are the ones that can help on this matter - they should set initial difficulty for the workers high enough, this way all miners would be able to process all shares, even for coins with low difficulties. We will try to pass this message to pool opeators, but also you can help spread the word with some tweets to various end user pools which are launching new alt coins with low difficulty.
September 06, 2014, 04:52:14 PM
good day today at nicehash, keep them coming 
September 06, 2014, 04:50:09 PM
I have 60 mh scrypt with asic and i get 40~ accepted MH on Nicehash whether i use vardiff or anything else. I get 50k+ WU. I get 55-60 mh accepted on normals pools.
What gives? I dont have this issue with GPUs, only ASICs.
What gives? I dont have this issue with GPUs, only ASICs.
Can you please tell us which miner are you using (manufacturer+model)?
Are you able to see which version of cgminer is the miner running?
Is the miner reporting any issues / rejects / stale shares or it simply does not reach desired speed?
Are you able to use some other software for this miner (for example, BFGMiner 4.7.0)?
Can you please try to put the miner behind the stratum-proxy and report if it works for you (https://www.nicehash.com/docs/connect-via-proxy/?
And can you please try both NiceHash and WestHash and report if you observe same issues on both systems?
Thanks for the feedback!
cg 4.3.5 and 3.1.1
No issues, low HW, 0.4%reject
Just doesnt reach desired speed (get 60mh on magic pool, 57mh on CM, under 50mh on NH overall)
Gawminers is fucking cryptic about configs to run them, prolly because they want to push us into using their stuff, so i havent been able to make BFG miner work.
Proxy thing sound like a pain to setup on linux and its not a reject or nonce issue so i didnt bother.
It was worse on WestHash, but i think it was because of OMG overhead since WestHash wouldnt let me raise the difficulty.
The issue come and go, it seem to be really bad on low difficulty coins, when i'm on a higher difficulty (i can see that in the stats by less shares) it almost reach desired speed. Last 24 hours average seem to be around 49mh vs 54mh desire, which is not as bad as before.
September 06, 2014, 03:59:32 PM
I have 60 mh scrypt with asic and i get 40~ accepted MH on Nicehash whether i use vardiff or anything else. I get 50k+ WU. I get 55-60 mh accepted on normals pools.
What gives? I dont have this issue with GPUs, only ASICs.
What gives? I dont have this issue with GPUs, only ASICs.
Can you please tell us which miner are you using (manufacturer+model)?
Are you able to see which version of cgminer is the miner running?
Is the miner reporting any issues / rejects / stale shares or it simply does not reach desired speed?
Are you able to use some other software for this miner (for example, BFGMiner 4.7.0)?
Can you please try to put the miner behind the stratum-proxy and report if it works for you (https://www.nicehash.com/docs/connect-via-proxy/?
And can you please try both NiceHash and WestHash and report if you observe same issues on both systems?
Thanks for the feedback!
September 06, 2014, 03:52:13 PM
are they back to 0.01 min payments ?
Payments are issued according to this: https://nicehash.com/?p=faq#faqs5; today we have also sent the 0.0001+ payments.
September 06, 2014, 11:40:46 AM
well i see the price recovered...or is there a new scrypt coin out?
September 06, 2014, 11:28:20 AM
are they back to 0.01 min payments ?
September 06, 2014, 11:05:39 AM
i received all payouts, no problem, but i see they pay now again when balance is over 0.01 ?
i got a 0.01560719 BTC payment
i got a 0.01560719 BTC payment
September 06, 2014, 04:39:35 AM
what happening ? no payout for over a day, my balance almost 0.04 now.
September 06, 2014, 04:05:45 AM
did you receive yesterday the payout from nicehash ?
I did not
I did not
I was about to ask the exact same thing. No payout...
does anyone know the reason ?
September 06, 2014, 04:04:35 AM
did you receive yesterday the payout from nicehash ?
I did not
I did not
I was about to ask the exact same thing. No payout...
September 06, 2014, 04:02:41 AM
did you receive yesterday the payout from nicehash ?
I did not
I did not
September 06, 2014, 12:41:11 AM
I have 60 mh scrypt with asic and i get 40~ accepted MH on Nicehash whether i use vardiff or anything else. I get 50k+ WU. I get 55-60 mh accepted on normals pools.
What gives? I dont have this issue with GPUs, only ASICs.
What gives? I dont have this issue with GPUs, only ASICs.
September 05, 2014, 11:02:09 PM
Anyone else not get a payout today? I have almost 0.04 btc built up.
Edit: I got it. Everything is good.
Edit: I got it. Everything is good.
September 05, 2014, 05:42:41 PM
I am new to Nice/WestHash. I have pointed my miners at WestHash and was wondering if there is a way to view my miner's stats.
I understand someone is renting my hashing power, but is there a way to view my miners performance and make sure it is registering correctly?
I understand someone is renting my hashing power, but is there a way to view my miners performance and make sure it is registering correctly?
https://westhash.com/index.jsp?p=miners
like he said except you must know the bitcoin address you send payments to as this serves as your username. you can also go to the main site westhash.com and click on miners then list
September 05, 2014, 03:06:40 PM
I am new to Nice/WestHash. I have pointed my miners at WestHash and was wondering if there is a way to view my miner's stats.
I understand someone is renting my hashing power, but is there a way to view my miners performance and make sure it is registering correctly?
I understand someone is renting my hashing power, but is there a way to view my miners performance and make sure it is registering correctly?
https://westhash.com/index.jsp?p=miners
September 05, 2014, 02:51:05 PM
I am new to Nice/WestHash. I have pointed my miners at WestHash and was wondering if there is a way to view my miner's stats.
I understand someone is renting my hashing power, but is there a way to view my miners performance and make sure it is registering correctly?
I understand someone is renting my hashing power, but is there a way to view my miners performance and make sure it is registering correctly?
September 05, 2014, 01:28:19 PM
Hi , I want to rent hashing power for 0,25 btc for 24h , i want to have it mine nonstop however I am a bit confused by your system , what would a good order look like that would fullfill my needs , usulay i use betarigs however all rigs for an afordable price there seem to be rented
I am usulay paying up to 0,7 btc/gh/day
I am usulay paying up to 0,7 btc/gh/day
Jump to: