Nicehash ... please make payout amounts changeable.
Every 4 hours is way too often and the fee is WAY too high!
0.01btc / payment with a 2% fee .. is fucking rape, because that just puts a bunch of tiny inputs in my btc addy. Meaning when I go to spend all of them Ill have to pay yet another huge fee!
Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 241. (Read 794394 times)
August 24, 2014, 04:46:12 AM
August 23, 2014, 05:00:08 PM
Is anyone else having issues connecting to the Nicehash pool to mine SHA256? My Antminers just say the pool is Dead, my settings all appear to be correct and it worked a few days ago just fine. Now that the Daily price has gone up I wanted to switch but I cant get back on now???
I have two S3 connected to nicehash as we speak. No problems, at least for now
That is very odd they are working with Westhash but not Nicehash
Check your password/price
All OK, Password = X I had it set to p=.0255 but changed to X because my Antminers never flipped back when the rates went up, and now it just says Dead when trying to mine on Nicehash! Same settings work perfectly well on Westhash though???
Nicehash doesn't not like me anymore
I have sortoff the same problem
Also dead pool even if price is higher than set price at password.
Sometimes it connectes to nicehash pool and than only mines halve speed...
The temps of miners also very low than, and after reboot nicehash pool is dead again.
August 23, 2014, 02:42:51 PM
Just figured Id try mining on nicehash... couple questions...
Why so many "stratum from pool 0 requested work restart" messages in cgminer?
-This happening so often doesnt it mean mining efficiency is going down the can....?
Ive seen this barely ever happen on good pools.
Also, my avalon3 module simply refuses to work on nice/westhash ... all work is hard rejected as HW errors, while the avalon3 has no issues at other pools...
Any idea why this is?
Im using latest cgminer 4.5.0 build...
Also, do you guys have a IRC channel?
Why so many "stratum from pool 0 requested work restart" messages in cgminer?
-This happening so often doesnt it mean mining efficiency is going down the can....?
Ive seen this barely ever happen on good pools.
Also, my avalon3 module simply refuses to work on nice/westhash ... all work is hard rejected as HW errors, while the avalon3 has no issues at other pools...
Any idea why this is?
Im using latest cgminer 4.5.0 build...
Also, do you guys have a IRC channel?
August 23, 2014, 02:04:49 PM
Made some good money early in the week, but the past few days have been less profitable than mining SHA256 on ghash. So I moved back to them. Hope to see the price kick up in the future here. I love the concept.
August 23, 2014, 08:52:55 AM
I can get everything working on Westhash ports 33xx but ports 43xx seem to be dead. Same if I try to use Nicehash. I presume the autoswitching pools are down???
Make sure you configure f, if you don't then all ports will be dead if you don't include all algorithms (except SHA256).
will this get me 1 gh/s for 1.7 hrs ??
To get 1 GH/s, you need to limit it to 1 GH/s, else the calculator will calculate according to current max available hash power.
August 23, 2014, 07:07:58 AM
.02 btc for 45 secs wow nice price when i had to up price to 9.1 or what ever
August 23, 2014, 06:50:46 AM
will this get me 1 gh/s for 1.7 hrs ??
August 22, 2014, 08:41:52 PM
I can get everything working on Westhash ports 33xx but ports 43xx seem to be dead. Same if I try to use Nicehash. I presume the autoswitching pools are down???
August 22, 2014, 11:04:15 AM
I am having no problem connecting with Westhash but I cant connect to Nicehash, very strange!
Ah! It was showing alive for me but when I forced it to switch it went dead, and my price threshold is exactly what is currently paying, so it should be alive -
"pass": "d=1024;p=0.0222"
So its not just me then?
August 22, 2014, 11:01:42 AM
I am having no problem connecting with Westhash but I cant connect to Nicehash, very strange!
Ah! It was showing alive for me but when I forced it to switch it went dead, and my price threshold is exactly what is currently paying, so it should be alive -
"pass": "d=1024;p=0.0222"
August 22, 2014, 10:58:37 AM
Done, but no change Miner still says Dead!
Its like my Antminers are blocked from connecting to the pool?
Its like my Antminers are blocked from connecting to the pool?
My S2 is happily connected to westhash with "pass": "d=1024;p=0.0211" ... running Kano's firmware w/ cgminer 4.3.5s2
I am having no problem connecting with Westhash but I cant connect to Nicehash, very strange!
August 22, 2014, 10:56:08 AM
Done, but no change Miner still says Dead!
Its like my Antminers are blocked from connecting to the pool?
Its like my Antminers are blocked from connecting to the pool?
My S2 is happily connected to westhash with "pass": "d=1024;p=0.0211" ... running Kano's firmware w/ cgminer 4.3.5s2
August 22, 2014, 10:42:47 AM
It's possible that nicehash blocked your IP or your BTC address but I guess they would have to have a good reason to do it.
Ask them!
Ask them!
How do I contact support? I cant find an email address?
August 22, 2014, 10:41:32 AM
It's possible that nicehash blocked your IP or your BTC address but I guess they would have to have a good reason to do it.
Ask them!
Ask them!
August 22, 2014, 10:38:02 AM
Is anyone else having issues connecting to the Nicehash pool to mine SHA256? My Antminers just say the pool is Dead, my settings all appear to be correct and it worked a few days ago just fine. Now that the Daily price has gone up I wanted to switch but I cant get back on now???
I have two S3 connected to nicehash as we speak. No problems, at least for now
That is very odd they are working with Westhash but not Nicehash
Check your password/price
All OK, Password = X I had it set to p=.0255 but changed to X because my Antminers never flipped back when the rates went up, and now it just says Dead when trying to mine on Nicehash! Same settings work perfectly well on Westhash though???
Nicehash doesn't not like me anymore
Try setting it to p=0.001 and take it from there
Done, but no change Miner still says Dead!
Its like my Antminers are blocked from connecting to the pool?
August 22, 2014, 10:32:19 AM
Is anyone else having issues connecting to the Nicehash pool to mine SHA256? My Antminers just say the pool is Dead, my settings all appear to be correct and it worked a few days ago just fine. Now that the Daily price has gone up I wanted to switch but I cant get back on now???
I have two S3 connected to nicehash as we speak. No problems, at least for now
That is very odd they are working with Westhash but not Nicehash
Check your password/price
All OK, Password = X I had it set to p=.0255 but changed to X because my Antminers never flipped back when the rates went up, and now it just says Dead when trying to mine on Nicehash! Same settings work perfectly well on Westhash though???
Nicehash doesn't not like me anymore
Try setting it to p=0.001 and take it from there
August 22, 2014, 10:28:19 AM
Is anyone else having issues connecting to the Nicehash pool to mine SHA256? My Antminers just say the pool is Dead, my settings all appear to be correct and it worked a few days ago just fine. Now that the Daily price has gone up I wanted to switch but I cant get back on now???
I have two S3 connected to nicehash as we speak. No problems, at least for now
That is very odd they are working with Westhash but not Nicehash
Check your password/price
All OK, Password = X I had it set to p=.0255 but changed to X because my Antminers never flipped back when the rates went up, and now it just says Dead when trying to mine on Nicehash! Same settings work perfectly well on Westhash though???
Nicehash doesn't not like me anymore
August 22, 2014, 10:24:40 AM
Is anyone else having issues connecting to the Nicehash pool to mine SHA256? My Antminers just say the pool is Dead, my settings all appear to be correct and it worked a few days ago just fine. Now that the Daily price has gone up I wanted to switch but I cant get back on now???
I have two S3 connected to nicehash as we speak. No problems, at least for now
That is very odd they are working with Westhash but not Nicehash
Check your password/price
August 22, 2014, 10:20:52 AM
Is anyone else having issues connecting to the Nicehash pool to mine SHA256? My Antminers just say the pool is Dead, my settings all appear to be correct and it worked a few days ago just fine. Now that the Daily price has gone up I wanted to switch but I cant get back on now???
I have two S3 connected to nicehash as we speak. No problems, at least for now
That is very odd they are working with Westhash but not Nicehash
August 22, 2014, 10:15:16 AM
Is anyone else having issues connecting to the Nicehash pool to mine SHA256? My Antminers just say the pool is Dead, my settings all appear to be correct and it worked a few days ago just fine. Now that the Daily price has gone up I wanted to switch but I cant get back on now???
I have two S3 connected to nicehash as we speak. No problems, at least for now
Jump to: