[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 266.

Zels

full member

Activity: 203

Merit: 100

Quote from: Crypto_EX on July 17, 2014, 09:15:53 AM

Quote from: ircactus on July 17, 2014, 06:32:02 AM

If you're buying:
Nicehash isn't a multipool. They don't mine anything. They sell hashpower which in turn is pointed to any pool of your choosing.

If you're selling
They provide a market to sell your hashing power to others who in turn mine at whichever pool they desire.

no i'm mining with my rigs there they have a multipool that mine alts and pays you in bitcoin ....

Nicehash don't mine any coin here.

They just list all the miner and someone buy x Mh and redirect this hashrate to a pool of theyr choice.

You as a miner, you provide your hashrate and tell i have xx Mh/s available, Use it to the best paying algo / buyer and the btc used by the buyer is shared to the miner.

Crypto_EX

member

Activity: 70

Merit: 10

Quote from: ircactus on July 17, 2014, 06:32:02 AM

If you're buying:
Nicehash isn't a multipool. They don't mine anything. They sell hashpower which in turn is pointed to any pool of your choosing.

If you're selling
They provide a market to sell your hashing power to others who in turn mine at whichever pool they desire.

no i'm mining with my rigs there they have a multipool that mine alts and pays you in bitcoin ....

oktay50000

sr. member

Activity: 560

Merit: 250

i think switcher got stuck again
pool shows x13 miner mines x11
factors are correct also Undecided

ircactus

full member

Activity: 120

Merit: 100

If you're buying:
Nicehash isn't a multipool. They don't mine anything. They sell hashpower which in turn is pointed to any pool of your choosing.

If you're selling
They provide a market to sell your hashing power to others who in turn mine at whichever pool they desire.

Crypto_EX

member

Activity: 70

Merit: 10

what coins does nicehash mine ? i know it's a multipool but at least i wanna know what coins are you mining currently because i couldn't find it on your website also do you guys keep adding new profitable to mine coins to your list ?! also why no x14 channel !?

jeezy

legendary

Activity: 1237

Merit: 1010

Quote from: rammy2k2 on July 16, 2014, 02:50:07 PM

ok, i tested NH too, but there is no way near as they say, to pay better than any other multipool , moved on

They are all pretty much around the same ballpack if you check cryp.today or poolpicker. The profitability isn't nearly as good anymore as couple of weeks ago sadly.

Billyboy402

hero member

Activity: 599

Merit: 500

i am getting 40% rejects today , mmm what is going on , maybe we need more pool adress or some thing

Hyacin75

newbie

Activity: 53

Merit: 0

Quote from: bt2084 on July 16, 2014, 09:56:23 PM

Is the SGMINER version 5 supposed to work with 64 bit Windows?

I use the same binary and same conf file on two different systems which have the same Asus 280X card trying to mine X13 multi --- the 32 bit system works fine and the 64 bit comes back with constant errors in sgminer and no work done.

Can you NiceHash guys compile a 64 bit version? Would that fix it?

I couldn't get it to run multi-algo for the life of me, no matter what I tried ... I ended up installing NiceHash Control (GREAT little app) and having it launch sgminer 5 with command-line arguments for a single NH pool at a time and all seems to be well for a week or so now ... that's on Win7 64-bit ...

bt2084

member

Activity: 63

Merit: 10

Is the SGMINER version 5 supposed to work with 64 bit Windows?

I use the same binary and same conf file on two different systems which have the same Asus 280X card trying to mine X13 multi --- the 32 bit system works fine and the 64 bit comes back with constant errors in sgminer and no work done.

Can you NiceHash guys compile a 64 bit version? Would that fix it?

Billyboy402

hero member

Activity: 599

Merit: 500

Quote from: Billyboy402 on July 15, 2014, 06:34:38 PM

Quote from: Hyacin75 on July 15, 2014, 10:01:58 AM

Since yesterday my SHA hashrate has been way down. I thought it was my rig (S2) and started tweaking things, but when nothing fixed it I reverted to what I had and tried another pool (multipool.us) ... with the exact same settings I get ~1116 Gh/s on multipool, and about 976 Gh/s on Nicehash ... prior to yesterday I'd get ~1.1 Th/s on Nicehash with those settings ... not sure what's up ... anyone else experiencing anything similar? Is it related to the DDOS?

I have been getting less . Every where else (ghash,btc guild , butminter. ) I get 980-1100
But on nicehash I get 400

Is there a way to update the on build in miner ? Or dowse need to run it through a PC with nicehash miner running it ?

Also my reject rate is close to 20%

Diff d=1024 . D=512 didn't make a difference

I did find that if i have them both together the hash rate on both would go down

EBK1000

legendary

Activity: 1148

Merit: 1000

A Wound in Eternity

I have tried to use Nicehash but I just dont get it, it appears very complicated, forgive me but can someone please explain it in simple terms. I have 0.5 BTC and I want to mine a specific scrypt coin most effectivly

rammy2k2

legendary

Activity: 1974

Merit: 1003

ok, i tested NH too, but there is no way near as they say, to pay better than any other multipool , moved on

nicehashdev

sr. member

Activity: 280

Merit: 250

There was a rounding error, please report if it happens again.

newuser01

sr. member

Activity: 434

Merit: 250

I cba to E-mail since I don't really care anymore

order was #39591

nicehashdev

sr. member

Activity: 280

Merit: 250

Quote from: newuser01 on July 16, 2014, 12:46:44 PM

Quote from: nicehashdev on July 16, 2014, 12:36:09 PM

Quote from: newuser01 on July 16, 2014, 12:34:10 PM

Hello

I am trying to change the price of an order from 0.28 to 0.29 and I get the answer: Only price increase is permitted

is 0.29 not a higher number than 0.28?

Obviously it is already 0.29 then, wait for orders to refresh (30 seconds) and press F5 button.

still showing 0.28

How long should I wait?

(I know the delay you speak about, it's not that)

Write to support: [email protected] with details what order is it about.

newuser01

sr. member

Activity: 434

Merit: 250

Quote from: nicehashdev on July 16, 2014, 12:36:09 PM

Quote from: newuser01 on July 16, 2014, 12:34:10 PM

Hello

I am trying to change the price of an order from 0.28 to 0.29 and I get the answer: Only price increase is permitted

is 0.29 not a higher number than 0.28?

Obviously it is already 0.29 then, wait for orders to refresh (30 seconds) and press F5 button.

still showing 0.28

How long should I wait?

(I know the delay you speak about, it's not that)

nicehashdev

sr. member

Activity: 280

Merit: 250

Quote from: newuser01 on July 16, 2014, 12:34:10 PM

Hello

I am trying to change the price of an order from 0.28 to 0.29 and I get the answer: Only price increase is permitted

is 0.29 not a higher number than 0.28?

Obviously it is already 0.29 then, wait for orders to refresh (30 seconds) and press F5 button.

newuser01

sr. member

Activity: 434

Merit: 250

Hello

I am trying to change the price of an order from 0.28 to 0.29 and I get the answer: Only price increase is permitted

is 0.29 not a higher number than 0.28?

nicehashdev

sr. member

Activity: 280

Merit: 250

Quote from: Txslady on July 16, 2014, 09:12:07 AM

Can anyone help. I put in an order to mine scrypt on a pool but it says the pool has rejected the connection. Is there a list somewhere that says which pools are compatible with this service? I am trying to mine LTC on F2Pool.

Shannon

Make sure it is a stratum pool and not getwork. Many p2p pools are actually getwork.

Quote from: atomicchaos on July 16, 2014, 09:13:38 AM

Quote from: nicehashdev on July 16, 2014, 05:14:59 AM

How do you want sorting to be done? By speed?

Sort by worker name, at least for my purposes, but having the ability to sort by any of the columns would be useful.

Will add on todo list to be able to sort by any column with click on it.

atomicchaos

hero member

Activity: 630

Merit: 500

Quote from: nicehashdev on July 16, 2014, 05:14:59 AM

How do you want sorting to be done? By speed?

Sort by worker name, at least for my purposes, but having the ability to sort by any of the columns would be useful.

Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 266. (Read 794394 times)