[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 47.

digitan

newbie

Activity: 22

Merit: 0

Hello,

I'm using the latest 2.0.0.12 version of Nicehash but apparently sometimes the Claymore won't start automatically. It only shows the Excavator window and the Nicehash Control Panel were it says that Current Mining Status: Active - Running showing Total Balance and 0 estimated earnings.

Any solution?

Thanks

Icon

hero member

Activity: 821

Merit: 503

Was the pool verify removed, cant seem to find it. Don't want to waste BTC/fees just to find out pool wont work Sad

Icon

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: thescoundrel on August 18, 2017, 06:49:06 AM

Am I the only one having issues with the European scrypt nicehash pool servers lately?
More and more often the last weeks i found my rigs connecting to the second pool in the list, which in my case is the US nicehash pool.

Actually the miners are pointing to MRR which has scrypt.eu.nicehash.com and scrypt.us.nicehash.com as 1st and 2nd pool in the list.

Cheers,

TS

A week ago i had to connect to your pool because the US pool wouldn't connect for scrypt miners now the EU pool won't, GO figure .

also i was sent BTC @ 6 am this morning from nicehash and they are stuck on the block chain as a unconfirmed transaction. I found out nicehash sent them with to low a fee .

thescoundrel

newbie

Activity: 1

Merit: 0

Am I the only one having issues with the European scrypt nicehash pool servers lately?
More and more often the last weeks i found my rigs connecting to the second pool in the list, which in my case is the US nicehash pool.

Actually the miners are pointing to MRR which has scrypt.eu.nicehash.com and scrypt.us.nicehash.com as 1st and 2nd pool in the list.

Cheers,

TS

Mrtree420

member

Activity: 93

Merit: 11

This new version of the miner is lame. Keeps disconnecting and saying it "found a new block" but the miner is not mining. Can we still use the older version?

Bulletdodger

sr. member

Activity: 337

Merit: 250

Quote from: Bulletdodger on August 15, 2017, 12:07:59 PM

Short question, I got a decent bit of scrypt mining power renting on nicehash, yet it always reports my hashrate considerably lower than it really is, like 10% lower.
Is that a reason to be concerned?

Also the rejected shares are between 0.3 and 1.8%, is that normal?
I'm from EU, and using EU server (amsterdam one). I'm obviously more concerned about the 10% lower hash report rate.

Thanks

Anybody?
I'm getting up to 20% lower reported hashrate than I'm giving out, these aren't negligible numbers.
Xn sub turned on, of course.

Thanks

ocimjr

member

Activity: 95

Merit: 10

My miner keeps zero'ing out. Does this mean it keeps disconnecting my miners?

Why?

I am using latest minera with cpuminer for my gridseeds & a second minera using cgdmaxlzeus for my fury.

And I cannot use any proxy for Minera...

Either fix it or Ima have to go back to low profit clevermining.

Not to long ago everything was working terrific.

Don't fix something that aint broke damnit. gah.

bclcjunkie

hero member

Activity: 833

Merit: 1001

hmm weird.. i have xnsub turned on too... anyway i'm back to mining a single coin, seems more stable that way for now..

Quote from: sqnkee on August 16, 2017, 01:00:01 PM

Quote from: bclcjunkie on August 16, 2017, 04:58:42 AM

hey guys does anyone of you have issues where L3+ hashrate would drop to 0 when mining on Nicehash? the only way to recover is to power cycle.

Nope, but had same problem on prohashing. On nicehash with xnsub turned on everything is fine.

sqnkee

newbie

Activity: 54

Merit: 0

Quote from: bclcjunkie on August 16, 2017, 04:58:42 AM

hey guys does anyone of you have issues where L3+ hashrate would drop to 0 when mining on Nicehash? the only way to recover is to power cycle.

Nope, but had same problem on prohashing. On nicehash with xnsub turned on everything is fine.

bclcjunkie

hero member

Activity: 833

Merit: 1001

hey guys does anyone of you have issues where L3+ hashrate would drop to 0 when mining on Nicehash? the only way to recover is to power cycle.

Bulletdodger

sr. member

Activity: 337

Merit: 250

Short question, I got a decent bit of scrypt mining power renting on nicehash, yet it always reports my hashrate considerably lower than it really is, like 10% lower.
Is that a reason to be concerned?

Also the rejected shares are between 0.3 and 1.8%, is that normal?
I'm from EU, and using EU server (amsterdam one). I'm obviously more concerned about the 10% lower hash report rate.

Thanks

favelle75

hero member

Activity: 910

Merit: 501

No payouts today? I thought it was every Tuesday?

preda

sr. member

Activity: 756

Merit: 250

Why if use claymore 9.8 with my 6x 1060 nothing happen... but when i use nicehash gpu6 get temp error and stop working?

sqnkee

newbie

Activity: 54

Merit: 0

Can Nicehash finally start paying out transfers in a different currency than pathetic bitcoin? Im waiting for confirmation 24hours !!!!

Lucred

newbie

Activity: 33

Merit: 0

Quote from: Xardas2014 on August 13, 2017, 12:20:36 PM

Would you please offer a "night mode" color scheme? The current scheme is way too bright

Same goes for bitcointalk

This, I really like the orange theme but the background is too bright. It would be awesome if you could tune it down a bit or add a night mode.

garaux

newbie

Activity: 8

Merit: 0

Hey Nicehash team - I am solo mining x11 on your solo.nicehash.com pool and my rig is reporting crazy hash speeds that are not remotely close to being real. I assume its an issue with vardiff and the speed of the miner (10.8GHs). What do i need to adjust to lower the reject rate and get my hashing under control?

Stats:
Hashrate: 483,343 MHs
Reject Rate: 14.79%

taskmaru

newbie

Activity: 14

Merit: 0

Since yesterday I can't get past 32 $ earning mark. It gets to 32 several times but it resets to 30 . My PC runs 24 hrs with one rx 470 and it seems I am not earning that much since yesterday. Is this normal ? Lips sealed

youni

newbie

Activity: 10

Merit: 0

Hi,
I just got my first ASIC miner the iBeLink DM11G. I tried solomining on nicehash but I am getting a high reject rate. Can someone tell me what is wrong? TIA!

Bitblockchain

newbie

Activity: 15

Merit: 0

Hello Nicehash team, is there a way to mine HUSH coin with Nicehash? And what i have to change in the config to start mining HUSH? Thank you!

Xardas2014

hero member

Activity: 635

Merit: 500

Quote from: SpacedCowboy on August 13, 2017, 06:17:55 PM

Quote from: Xardas2014 on August 13, 2017, 12:30:30 PM

Quote from: SpacedCowboy on August 13, 2017, 11:50:34 AM

So I have a bunch (16) of new L3+'s split between litecoinpool and prohashing, and nicehash seems like a better way to sell the hashing power. For the life of me though, I can't find anywhere on your site which spells out what details to give to my co-lo.

Note: I've never even seen the machines themselves, they're delivered from Bitmain to the co-lo, so I'm not too familiar with the interface. From setting up for the other services though, it seems I use a stratum url, a username and a password. Here's what I think everything ought to be set to, I'd appreciate any input if I'm going wrong somewhere

The stratum URL should be set to stratum+tcp://scrypt.us.nicehash.com:3333#xnsub - is this correct ? I can't find it stated anywhere if the L3+ units support #xnsub or not. If it's supported, is there a '/' like for BFG/KNC miner
The username should be a bitcoin address from my wallet
Do I set the password to an identifier for the individual worker ? I think I saw that this ought to be blank

I saw that you state you provide individual worker statistics, but I'm not clear on how that works. Do I provide a different bitcoin receiving address for each worker, is that it ?

Thanks

Hi Spaced.......assuming you are the same from the ltc forum
Your url looks correct and L3+ can use xnsub. For the wallet address add a worker name like btcaddy.worker, that way you can track each worker on one page. I use x for the password, but you can set a few parameters such as start diff in the password field. I don't find this very useful. Most pools will adjust quickly anyway.

Hey Xardas. Yep, same 'ole me

Thanks dude - I've been noticing that litecoinpool has been a bit wobbly recently, so looks like a move is on the cards.

Well good to see you here. For those that don't know, SpacedCowboy is one of the smartest people in the crypto universe. Using the word smart doesn't really do him justice. Genius get marginally closer to the truth, but is still lacking. It is quite likely you have some of his work in your possession. Don't let the lack of posts fool you. Wink

Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 47. (Read 794380 times)