It's ~116 MH/s right now, so there's either more people interested than is apparent in this thread, or it has a terrible hashpersec calculator.
It looks like everyone likes this coin but the dev. If not for about 6 people and a lot of trial and error, it would now be an increasingly unresolvable mess with people stuck and bailing permanently, or mining on different blockchains and standing to lose a lot of coins if it ever was straightened out.
It needs a pool and a blockchain explorer, and I might look into those, but the dev has to make his intentions clear. The people pulling in the most blocks might want to offer up some bounties.
Topic: [ANN] Philosopherstone - PHS | No Premine | Mandatory update 1.2Beta3 - page 21. (Read 81104 times)
August 11, 2013, 11:19:30 AM
August 11, 2013, 04:20:32 AM
Anyone capable of making a p2pool version for this?
would set up a node and make sure you get a good donation %
would set up a node and make sure you get a good donation %
August 11, 2013, 04:17:00 AM
block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar
my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw
ps: if bad synchronization
1. remove any node
2. turn off / on the client
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar
my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw
ps: if bad synchronization
1. remove any node
2. turn off / on the client
This works for me. I had to repair wallet. Sent you a block.
Thanks.
-tb-
August 11, 2013, 03:41:15 AM
nice finally diff getting resonable.... Also, My POS shares are coming through at the Tenth day paying an immature dividend type payment of around 1.2% of the coins matured on the day ten days ago... this works out to around 3.6% predicted monthly interest rate.... POS is working GREAT... I think this coin is really a potential challenge to savings accounts.... Now if we as a community could agree on what to spend it on... Since the interest rate is relatively high for Holding the currency then the projects should have potential for EVEN GREATER returns... There's the rub... What projects can compete with 50% interest annually?
only inventive and creative projects with a real potential of creating a cashflow... What do people think of a KickStarter.com that works in Bitcoin and PHS? -- digerosSimple just use PoW coins for that and PoS for savings. A hybrid with low % interest is a good middle ground, high interest return best for store of value, imo - time will tell.
August 11, 2013, 03:30:12 AM
nice finally diff getting resonable.... Also, My POS shares are coming through at the Tenth day paying an immature dividend type payment of around 1.2% of the coins matured on the day ten days ago... this works out to around 3.6% predicted monthly interest rate.... POS is working GREAT... I think this coin is really a potential challenge to savings accounts.... Now if we as a community could agree on what to spend it on... Since the interest rate is relatively high for Holding the currency then the projects should have potential for EVEN GREATER returns... There's the rub... What projects can compete with 50% interest annually?
only inventive and creative projects with a real potential of creating a cashflow... What do people think of a KickStarter.com that works in Bitcoin and PHS? -- digerosSimple just use PoW coins for that and PoS for savings. A hybrid with low % interest is a good middle ground, high interest return best for store of value, imo - time will tell.
August 11, 2013, 03:20:26 AM
8/11/2013, 1:18AM
{
"blocks" : 9334,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 4.10630251,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 137551813,
"pooledtx" : 0,
"testnet" : false
}
And 8 hours ago it was ~3 MH/s.
I hereby declare it alive and rock solid and nothing could possibly go wrong.
Nothing.
Thank god the hash is back and the blockchain forking issue seems to be worked out
00:14:03

getmininginfo
00:14:03

{
"blocks" : 9380,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 3.12194134,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 96743405,
"pooledtx" : 0,
"testnet" : false
}
nice finally diff getting resonable.... Also, My POS shares are coming through at the Tenth day paying an immature dividend type payment of around 1.2% of the coins matured on the day ten days ago... this works out to around 3.6% predicted monthly interest rate.... POS is working GREAT... I think this coin is really a potential challenge to savings accounts.... Now if we as a community could agree on what to spend it on... Since the interest rate is relatively high for Holding the currency then the projects should have potential for EVEN GREATER returns... There's the rub... What projects can compete with 50% interest annually?
only inventive and creative projects with a real potential of creating a cashflow... What do people think of a KickStarter.com that works in Bitcoin and PHS? -- digeros August 11, 2013, 01:47:56 AM
8/11/2013, 1:18AM
{
"blocks" : 9334,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 4.10630251,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 137551813,
"pooledtx" : 0,
"testnet" : false
}
And 8 hours ago it was ~3 MH/s.
I hereby declare it alive and rock solid and nothing could possibly go wrong.
Nothing.
looks like the 70 mhash from 2 of the earlier dead ends might have made it
{
"blocks" : 9337,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 4.10630251,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 126124683,
"pooledtx" : 0,
"testnet" : false
}
August 11, 2013, 01:26:52 AM
8/11/2013, 1:18AM
{
"blocks" : 9334,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 4.10630251,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 137551813,
"pooledtx" : 0,
"testnet" : false
}
And 8 hours ago it was ~3 MH/s.
I hereby declare it alive and rock solid and nothing could possibly go wrong.
Nothing.
August 10, 2013, 11:35:42 PM
block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar
my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw
ps: if bad synchronization
1. remove any node
2. turn off / on the client
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar
my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw
ps: if bad synchronization
1. remove any node
2. turn off / on the client
This works for me. I had to repair wallet. Sent you a block.
Thanks.
-tb-
August 10, 2013, 11:20:31 PM
So.. Where i download wallet version 1.0?
If you're on Windows, you can probably just use the current blockchain. These files are incompatible with Linux, so those users had to compile and try the 1.0 method. I can send you the Windows blockchain, Windows 1.0 client, or the source code if you're on Linux.
I would suggest the current blockchain as you don't have to run a binary from an unofficial source (me).
EDIT: Check your PM.
Dam you're files didn't work! The wallet just give me an error 22 when i open it.. Well thanks anyway..
edit: Denned files worked! I am on sync again!
I'm glad something worked. I'm here:
{
"blocks" : 9271,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.57854267,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 19046861,
"pooledtx" : 0,
"testnet" : false
}
August 10, 2013, 11:11:15 PM
So.. Where i download wallet version 1.0?
If you're on Windows, you can probably just use the current blockchain. These files are incompatible with Linux, so those users had to compile and try the 1.0 method. I can send you the Windows blockchain, Windows 1.0 client, or the source code if you're on Linux.
I would suggest the current blockchain as you don't have to run a binary from an unofficial source (me).
EDIT: Check your PM.
Dam you're files didn't work! The wallet just give me an error 22 when i open it.. Well thanks anyway..
edit: Denned files worked! I am on sync again!
August 10, 2013, 10:45:41 PM
So.. Where i download wallet version 1.0?
If you're on Windows, you can probably just use the current blockchain. These files are incompatible with Linux, so those users had to compile and try the 1.0 method. I can send you the Windows blockchain, Windows 1.0 client, or the source code if you're on Linux.
I would suggest the current blockchain as you don't have to run a binary from an unofficial source (me).
EDIT: Check your PM.
August 10, 2013, 09:46:43 PM
why is the diff at 1.2 
August 10, 2013, 09:05:36 PM
So.. Where i download wallet version 1.0?
August 10, 2013, 05:57:56 PM
Stuck again at 6048 
Try this:
Keep a backup of your original wallet.
Get rid of everything but your .conf file. You'll let it recreate a new wallet when it first starts.
Run 1.0, and let it sync. When it syncs, stop it immediately and run 1.2. Don't leave 1.0 synced running too long, or it will desync. Hopefully 1.2 will keep the sync.
Let it sit for a while to make sure everything's working before stopping it and copying back your original wallet.dat, but always keep a wallet backup.
If everything's working, type repairwallet in the debug console. You might lose some coins, but everything should be fixed.
It doesn't seem like 1.2 can get past 6048 without dropping in a new blockchain, so somehow you have to use 1.0 to get past it.
You might have to open up your firewall to get lots of connections. I have 47.
12:56 est, the hash is creeping up:
Quote
{
"blocks" : 8979,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.49196388,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 17952156,
"pooledtx" : 0,
"testnet" : false
}
"blocks" : 8979,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.49196388,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 17952156,
"pooledtx" : 0,
"testnet" : false
}
Tested this and it works... but now we know where all the 1.0 and 1.1 nodes are coming from ! jk..
This works tho for those of you who are stuck on one of the 6k forks still mining out like 70mhash
August 10, 2013, 01:14:23 PM
That happens to me when I get a stake
August 10, 2013, 01:13:29 PM
anyone else notice that the difficulty displayed when hovering the green checkmark in the overview page doesn't match what is displayed in the rpc console?
Mine does, but has less decimal points, and there might be a lag. The checkmark seems to show a new block and difficulty a few seconds before console refreshes, but don't quote me on that. The difficulty's been jumping around as the hashrate recovers.
Everyone's on 1.2 now, I hope.
EDIT: As soon as I posted this, the diff is way different.
August 10, 2013, 01:06:06 PM
anyone else notice that the difficulty displayed when hovering the green checkmark in the overview page doesn't match what is displayed in the rpc console?
12:04:29

12:04:29

Code:
getmininginfo
12:04:29

{
"blocks" : 8983,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.61979837,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 22814001,
"pooledtx" : 0,
"testnet" : false
}
August 10, 2013, 12:59:18 PM
Stuck again at 6048
Try this:
Keep a backup of your original wallet.
Get rid of everything but your .conf file. You'll let it recreate a new wallet when it first starts.
Run 1.0, and let it sync. When it syncs, stop it immediately and run 1.2. Don't leave 1.0 synced running too long, or it will desync. Hopefully 1.2 will keep the sync.
Let it sit for a while to make sure everything's working before stopping it and copying back your original wallet.dat, but always keep a wallet backup.
If everything's working, type repairwallet in the debug console. You might lose some coins, but everything should be fixed.
It doesn't seem like 1.2 can get past 6048 without dropping in a new blockchain, so somehow you have to use 1.0 to get past it.
You might have to open up your firewall to get lots of connections. I have 47.
12:56 est, the hash is creeping up:
Quote
{
"blocks" : 8979,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.49196388,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 17952156,
"pooledtx" : 0,
"testnet" : false
}
"blocks" : 8979,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.49196388,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 17952156,
"pooledtx" : 0,
"testnet" : false
}
August 10, 2013, 12:50:07 PM
block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar
my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw
ps: if bad synchronization
1. remove any node
2. turn off / on the client
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar
my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw
ps: if bad synchronization
1. remove any node
2. turn off / on the client
This download won't work for linux users! There is no 'AppData\Roaming\' directory.
Someone who has the correct block chain downloaded post your IP so all the linux users can connect to you and sync up.
Check your PM.
Thanks!
"Help! I've fallen off the block chain and I can't get up!" TM
LoL, i'm considering making an Windows Installer Package that installs the new client AND installs the blockchain provided by denned.That takes care of Windows users "getting over the hump". What about linux? now it would be a good idea for someone to create a shell script that does the same for linux, however most linux users are tech savvy enough this probably wouldn't be necessary.
SCAMMER DONT DO BUSINESS WIT HIM
LoL. get a life troll
Jump to: