[ANN] [PI metal detector private shares with 50% profits] by alcurEX CEO

sorryforthat

hero member

Activity: 994

Merit: 500

Quote from: halibit on July 11, 2016, 04:01:42 PM

I have no time even touch the project since last message.
Alcurex has take all my time but this will continue after I can get time.
Maybe I should search some other el guy to finishing this project to a live with me.
My time is so limited.

I think it may be time to admit that your attempts were a failure. Hell, you didnt even make updates on what you mined on the trip which was supposed to be dispersed between shareholders. It was a foolish investment on my part; one of many and definitely not the last. If the idea is dead and no longer moving forward, then own it and let everyone move forward.

halibit

legendary

Activity: 1596

Merit: 1006

Quote from: jamesjde on June 26, 2016, 05:27:42 AM

Hello halibit,

We are now one year past the start of the project.
Have you succeeded in creating a working metal detector?

Thank you

I have no time even touch the project since last message.
Alcurex has take all my time but this will continue after I can get time.
Maybe I should search some other el guy to finishing this project to a live with me.
My time is so limited.

jamesjde

newbie

Activity: 26

Merit: 0

Hello halibit,

We are now one year past the start of the project.
Have you succeeded in creating a working metal detector?

Thank you

halibit

legendary

Activity: 1596

Merit: 1006

Quote from: jamesjde on March 02, 2016, 11:10:42 PM

Hello halibit,

Can you update us on the progress you have made with the model in the past two months?

Thank you

Quote from: halibit on December 13, 2015, 08:17:02 AM

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

I know you are waiting, I have been busy with alcurex but i have some progress with project.

On next week, I can send scope picks about tx and rx pulse data, but before I can show how it will acting in real life, I need to find one more component. I need 1-10 or max100us isolated relay for damping rx coil before reading process. This need to be physically open/close model so it will not damp coil when collector is open.
-halibit-

jamesjde

newbie

Activity: 26

Merit: 0

Hello halibit,

Can you update us on the progress you have made with the model in the past two months?

Thank you

Quote from: halibit on December 13, 2015, 08:17:02 AM

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

sorryforthat

hero member

Activity: 994

Merit: 500

Quote from: halibit on December 13, 2015, 08:17:02 AM

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

Very cool. I cannot wait to see the results and appreciate the updates.

halibit

legendary

Activity: 1596

Merit: 1006

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

halibit

legendary

Activity: 1596

Merit: 1006

Quote from: jamesjde on November 17, 2015, 09:46:02 PM

Hello Halibit,

How is the model progressing?
Have you finished the receiver circuit?

Thanks

Quote

About model:
I'm on half way with circuit.
Power supply and transmitter are ready.
I made it so wave duration, length and frequency can change.
Next is receiver circuit.. and then need to balance faster coil than I have ever seen used with PI.
(Need to be low noise components and coil self resonance)

Hello.
Yes schematic is all ready and Breadboard model tested.
All fine so far.
Tomorrow I will start with pcb.
And I need to make unique coil for this model. but I already have all parts for that.
Then I can start testing it.
I will print results in here.
This project I really like

jamesjde

newbie

Activity: 26

Merit: 0

Hello Halibit,

How is the model progressing?
Have you finished the receiver circuit?

Thanks

Quote

About model:
I'm on half way with circuit.
Power supply and transmitter are ready.
I made it so wave duration, length and frequency can change.
Next is receiver circuit.. and then need to balance faster coil than I have ever seen used with PI.
(Need to be low noise components and coil self resonance)

halibit

legendary

Activity: 1596

Merit: 1006

Quote from: jamesjde on November 07, 2015, 07:32:55 PM

Quote from: halibit on October 25, 2015, 05:52:26 PM

Quote from: TotalPanda on October 13, 2015, 02:13:34 AM

Where is the wallet ?

About device itself:
Main circuit is ready planned and most of components will come on next week.
With main circuit I can build basic model.
It can handle 20ns cycle. (over 50% faster than regular pulse rate)

Hello Halibit,

Have you now constructed the basic model?
Also, how will you be marketing it?

Thank you.

About model:
I'm on half way with circuit.
Power supply and transmitter are ready.
I made it so wave duration, length and frequency can change.
Next is receiver circuit.. and then need to balance faster coil than I have ever seen used with PI.
(Need to be low noise components and coil self resonance)

Hoping you have patience to wait because I really try to make this well.

About marketing:
My plan is send samples to some resellers and they can test it in real life.
If they will get better result with our device than any other one, I'm pretty sure they will start sell it.
But also I will build webshop for it.
And if I'll get time on next summer, I will go to Lapland gold field.
It is place where is only extremely tiny nuggets.
Nice challenge for any device.

edit:
Forgot to say...
Would be nice if send model to some tech magazine who testing devices.
But lets make it ready at first

jamesjde

newbie

Activity: 26

Merit: 0

Quote from: halibit on October 25, 2015, 05:52:26 PM

Quote from: TotalPanda on October 13, 2015, 02:13:34 AM

Where is the wallet ?

About device itself:
Main circuit is ready planned and most of components will come on next week.
With main circuit I can build basic model.
It can handle 20ns cycle. (over 50% faster than regular pulse rate)

Hello Halibit,

Have you now constructed the basic model?
Also, how will you be marketing it?

Thank you.

SISAR

hero member

Activity: 651

Merit: 518

Quote from: SISAR on October 05, 2015, 11:51:09 AM

Quote from: popcorn75 on October 01, 2015, 05:50:33 AM

We need updates.

+1

Also website password recovery functionality is broken, I can request reset but I never receive email of any kind so now I can not login or reset password.

And what about issue as explained in quoted post?

halibit

legendary

Activity: 1596

Merit: 1006

Quote from: TotalPanda on October 13, 2015, 02:13:34 AM

Where is the wallet ?

Wallet is not created yet for that project.
When new model is ready and if shareholders want to, I can make public wallet for shares (PoS with almost zero stake).

About IPO situation:
There is 5K unsold shares left and because no volume, I will take it out from order list, so everyone can trade shares freely under or over IPO price.

Rest of 5K shares will be offered again after detector model is ready, but with 10X higer price.
More fair for early investors.

About device itself:
Main circuit is ready planned and most of components will come on next week.
With main circuit I can build basic model.
It can handle 20ns cycle. (over 50% faster than regular pulse rate)

When faster diodes, mosfets, opamps will come, I can start building our goal model 4-6ns pulse cycle.
(Faster pulse can pick signal from smaller metal objects and makes possible to search it deeper)
Have to say those components are not cheap, but we can live with it.
Those will rise costs about 120$.

Then need to build module for separate different waves.
But this part I can design after I see basic model on action.

jimblasko

hero member

Activity: 510

Merit: 500

Here's my Bitcoin Address for nothing else but this project: 1BygKAtmK9sAfExuTRGypQVNoCMy69FysT

Donate enough BTC to cover that minelabs metal detector and I'll build the coin and support it :-)

Keep Track of the balance here: https://blockchain.info/address/1BygKAtmK9sAfExuTRGypQVNoCMy69FysT

jimblasko

hero member

Activity: 510

Merit: 500

I can make the coin, windows and linux wallets, I would do it for one of those minelab gold eureka metal detectors Grin

TotalPanda

legendary

Activity: 1946

Merit: 1012

vertex output parameter not completely initialized

Where is the wallet ?

SISAR

hero member

Activity: 651

Merit: 518

Quote from: popcorn75 on October 01, 2015, 05:50:33 AM

We need updates.

+1

Also website password recovery functionality is broken, I can request reset but I never receive email of any kind so now I can not login or reset password.

popcorn75

sr. member

Activity: 350

Merit: 250

We need updates.

halibit

legendary

Activity: 1596

Merit: 1006

Quote from: jimblasko on August 26, 2015, 06:19:39 AM

Quote from: halibit on August 22, 2015, 10:41:14 AM

Quote from: Riseman on August 18, 2015, 02:24:52 PM

halibit, can you share your plans with us, please? Have you finished designing the prototype? When do you expect to start production?

No I have not finish new prototype yet.
This may take while.
I don't want to start selling unfinished model.
But as I wrote, concept is ready, just need a lot work.

If you want, we can start selling fast&cheap model but honestly it can't find nuggets as minelab (on iron ground).
It might be bad reputation to start with that...
I really want people will find gold with our model.

Can't say ETA for new model, but I will start with it on next week.

No offense but I don't think competing with Garrets, Whites, or Fisher is not even possible let alone Minelabs.

If gold is what you want to find, just buy any Minelabs detector over $1000.00 starting with this one http://www.kellycodetectors.com/products/gold/na237-33160005/eureka-gold

Anything over $1000 will have auto ground balance and deal with heavy mineralized ground the best. I personally have found gold with this Gold Eureka model, but I will be upgrading to this one in the next few months. http://www.kellycodetectors.com/products/all-purpose/na237-32280101/ctx-3030-standard-with-wireless-headphones

Cant say nothing about CTX-3030 model, but currently on Australia there is not many who even want to use other than minelab GPX or similar series models for prospecting gold. (+3000$ devices)
VLF detectors are useless in there.

You might be right about competing with those models, but I will make model ready at first and then we will see how and where to start marketing it.

jimblasko

hero member

Activity: 510

Merit: 500

Quote from: halibit on August 22, 2015, 10:41:14 AM

Quote from: Riseman on August 18, 2015, 02:24:52 PM

halibit, can you share your plans with us, please? Have you finished designing the prototype? When do you expect to start production?

No I have not finish new prototype yet.
This may take while.
I don't want to start selling unfinished model.
But as I wrote, concept is ready, just need a lot work.

If you want, we can start selling fast&cheap model but honestly it can't find nuggets as minelab (on iron ground).
It might be bad reputation to start with that...
I really want people will find gold with our model.

Can't say ETA for new model, but I will start with it on next week.

No offense but I don't think competing with Garrets, Whites, or Fisher is not even possible let alone Minelabs.

If gold is what you want to find, just buy any Minelabs detector over $1000.00 starting with this one http://www.kellycodetectors.com/products/gold/na237-33160005/eureka-gold

Anything over $1000 will have auto ground balance and deal with heavy mineralized ground the best. I personally have found gold with this Gold Eureka model, but I will be upgrading to this one in the next few months. http://www.kellycodetectors.com/products/all-purpose/na237-32280101/ctx-3030-standard-with-wireless-headphones

Topic: [ANN] [PI metal detector private shares with 50% profits] by alcurEX CEO (Read 9141 times)