[ANN] PiFury - Bitfury based RPi daughterboard

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: mbilker on March 13, 2014, 08:05:31 PM

Are you still continuing this? If not, do you have plans to open source this?

i can upload the source files if you'd like. I discontinued with a 4 chip version due to sizing constraints of the fab house i use, and the fact that i got an M-board from a third party dirt-cheap and some cards to go in it.

As well, some calculations showed that it would have needed a heatsink which i was trying to avoid (for component placement reasons).

2 is fully possible. 3 with some effort. 4 in that small an area with only 2 layer pcb needs a heatsink for optimal performance and longevity.

in its place, for some bitfury ASICS i ordered, i have almost fully developed the NFx (its a link).

reply letting me know if you would still like me to gitorize the PiFury schematics and board files as they sit. (No new progress since last update)

mbilker

newbie

Activity: 4

Merit: 0

Are you still continuing this? If not, do you have plans to open source this?

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: Taugeran on January 31, 2014, 10:53:18 PM

Quote from: goxed on January 31, 2014, 08:04:36 PM

Quote from: Taugeran on January 31, 2014, 07:09:34 PM

hey all. sorry i seem to have gone dormant with this project. I've been dealing with a bunch of shit in my personal life i dont mind sharing. Main thing is the lovely lady in the white dress in my avatar (my wife) recently started having seizures/convulsions 2-6 times a day and doctors cant find a damn reason. along with taht is the medical bills from not having insurance (thanks obama ~:[ )

saddening story aside, I'm slowly making progress when i find myself a few minutes of peace.

yes thats me in my avatar, and wife, and daughter :,)

Is she having enough sleep. I know a close person whose seizures are triggered due to lack of sleep. I hear you man. Hope she gets well soon.

she gets enough sleep yea.

to distract myself for a while could i get you to post a detail shot of top of mboard where the regulator and rpi connector is. while my mind mulls how to place some components for pifury. im gunna work on a m-board mini.

also measurements if you could on the width of it and length from rpi connector edge of pcb to slot 4

also whats the part # for the right angle pi connector or where can i find it :S

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: goxed on January 31, 2014, 08:04:36 PM

Quote from: Taugeran on January 31, 2014, 07:09:34 PM

hey all. sorry i seem to have gone dormant with this project. I've been dealing with a bunch of shit in my personal life i dont mind sharing. Main thing is the lovely lady in the white dress in my avatar (my wife) recently started having seizures/convulsions 2-6 times a day and doctors cant find a damn reason. along with taht is the medical bills from not having insurance (thanks obama ~:[ )

saddening story aside, I'm slowly making progress when i find myself a few minutes of peace.

yes thats me in my avatar, and wife, and daughter :,)

Is she having enough sleep. I know a close person whose seizures are triggered due to lack of sleep. I hear you man. Hope she gets well soon.

she gets enough sleep yea.

to distract myself for a while could i get you to post a detail shot of top of mboard where the regulator and rpi connector is. while my mind mulls how to place some components for pifury. im gunna work on a m-board mini.

also measurements if you could on the width of it and length from rpi connector edge of pcb to slot 4

goxed

legendary

Activity: 1946

Merit: 1006

Bitcoin / Crypto mining Hardware.

Quote from: Taugeran on January 31, 2014, 07:09:34 PM

hey all. sorry i seem to have gone dormant with this project. I've been dealing with a bunch of shit in my personal life i dont mind sharing. Main thing is the lovely lady in the white dress in my avatar (my wife) recently started having seizures/convulsions 2-6 times a day and doctors cant find a damn reason. along with taht is the medical bills from not having insurance (thanks obama ~:[ )

saddening story aside, I'm slowly making progress when i find myself a few minutes of peace.

yes thats me in my avatar, and wife, and daughter :,)

Is she having enough sleep. I know a close person whose seizures are triggered due to lack of sleep. I hear you man. Hope she gets well soon.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

hey all. sorry i seem to have gone dormant with this project. I've been dealing with a bunch of shit in my personal life i dont mind sharing. Main thing is the lovely lady in the white dress in my avatar (my wife) recently started having seizures/convulsions 2-6 times a day and doctors cant find a damn reason. along with taht is the medical bills from not having insurance (thanks obama ~:[ )

saddening story aside, I'm slowly making progress when i find myself a few minutes of peace.

yes thats me in my avatar, and wife, and daughter :,)

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: tmu on January 11, 2014, 06:04:52 AM

Quote from: drifting on January 11, 2014, 04:26:07 AM

I would very much be interested in buying one of these (for fun, not profit). I hope you bring it to production!

Would it be possible to run this "shield" on top while using RPi to mine with usb errupters, I mean sametime with other mining things.
With reasonable price I am interested of few of these Wink

just to maximize RPi usage.

it should be able to as long as you were not planning on using the LCD shield as well to display hashrate

tmu

newbie

Activity: 59

Merit: 0

Quote from: drifting on January 11, 2014, 04:26:07 AM

I would very much be interested in buying one of these (for fun, not profit). I hope you bring it to production!

Would it be possible to run this "shield" on top while using RPi to mine with usb errupters, I mean sametime with other mining things.
With reasonable price I am interested of few of these Wink

just to maximize RPi usage.

cannachris

sr. member

Activity: 406

Merit: 250

cats love crypto | 911 truth @checktheevidence.com

Quote from: drifting on January 11, 2014, 04:26:07 AM

I would very much be interested in buying one of these (for fun, not profit). I hope you bring it to production!

Same here. 4 Bitfury chips would be a pretty nice achievement and a cool altcoin miner!

drifting

newbie

Activity: 24

Merit: 0

I would very much be interested in buying one of these (for fun, not profit). I hope you bring it to production!

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: asyring on January 09, 2014, 04:11:17 AM

Can you make a daughterboard for the A1 chip or one like the A1 hashrate?
With one bitfury you never come to ROI.

I realize 1 or even a few bitfury chips will probably never ROI. but this is not a serious investment vehicle.
This is a serious lesson in pcb design concepts for me designing it , but taken as a whole is a fun learning xperience.

As for the A1. That may come later down my hobbyist road in DIY home brew electronics

asyring

newbie

Activity: 29

Merit: 0

Can you make a daughterboard for the A1 chip or one like the A1 hashrate?
With one bitfury you never come to ROI.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

hey all who are following. after VS3's insight and some careful thought i would like to give a "small" update:

asics will be relocated to bottom side of the board
1 additional TPS54821 to allow OVERCLOCKING ***
vrm circuitry will be relocated to bottom side as well, board space permitting
5V0 800mA LDO regulator will be added to allow a single power connector to the pi
microUSB power connector will be replaced with a 12V 5.5mm OD 2.5mm ID barrel jack link if you wish to see

*** this change was made due to expressed concerns that only a single VRM would be overloaded if a user tried to overclock too much. now in a paired configuration each will be running at 4-6A under normal condition(not OCed). this leaves 2-4A headroom if sufficient cooling is observed.

some possibly meaningful stats:

board size: 85mm x 50mm
board area: size - cutout for usb header = 3978mm^2 per board side
if all goes well, all connectors to Pi will be out one end(side with ethernet )
power circuitry consumes ~1500 mm^2 on one side of the board

vs3

hero member

Activity: 622

Merit: 500

Pretty cool idea!

My (more than) two cents -
- #1 - K.I.S.S. Principle rulz

- I'd go with just a barrel jack and plan on powering the Pi through the connector. It's going to be a pain to find 2A+ USB adapters, plus they're expensive, and then you have to have yet another one for the Pi.
- Plan for having 3-3.5A per bitfury chip - that way enthusiasts would be able to overclock them (which btw turns out to be among the most loved features of the NanoFury)
- More power = more heat. Heat will have to go somewhere. I'd relocate the chips in such a way that a heatsink won't interfere with any screws or other hardware for attaching the board to the Pi.
- Leave some room around the BF chips in case enthusiasts want to add tiny heatsinks on them too - that's one of the things I had to do in the last version (it turned out the 22uF capacitors are too tall - I moved them around so that they don't get in the way, now only the tiny 100uF are there but they're smaller than the chip)

And finally - I noticed that you're using KiCAD! Congrats! You're a brave man!

I know how much pain it was to learn my way around, so feel free to ping me if you get stuck anywhere.

And have a lot of fun and good luck with that project!

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

OP has some new pron in it

lajz99

hero member

Activity: 756

Merit: 500

Following along.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: bobsag3 on January 06, 2014, 01:55:02 PM

Black arrow has something very much like this for their bit fury boards, works pretty well.

Just took a look at black arrow. My board would quite literally be 1of the strips of 4 chips out of that board

But theirs needs the board an tax to 2wire power board a controller board as we'll

PiFury should just be PnP, power cycle to be sure, and then fire up cgminer, bfgminer, or chainminer.

Each has their advantages

Mine is footprint

Theirs is scalability.

Will try to add chaining if the footprint allows

actudoran

sr. member

Activity: 358

Merit: 250

cool bananas ! really looking forward to your development !

Keep us posted

FlappySocks

hero member

Activity: 546

Merit: 500

Quote from: Taugeran on January 06, 2014, 12:29:04 PM

EDIT: after clearing early morning haze from brain, I realized a second regulator wouldn't be necessary to power the Pi since the board input will already be 5V. Just need to take into consideration that extra 0.8A while doing track width ( and finding a 5V3A microusb wallwart to test with)

I was thinking of two for stability to avoid voltage drops. The Pi likes a nice stable supply, although I guess with care one would do. I use these for my Pi projects. http://www.murata-ps.com/data/power/oki-78sr.pdf

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Black arrow has something very much like this for their bit fury boards, works pretty well.

Topic: [ANN] PiFury - Bitfury based RPi daughterboard (Read 3501 times)