Hey cool, they used my moon idea.
https://bitcointalk.org/index.php?topic=259649.msg4053086;topicseen#msg4053086
Topic: [ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 364. (Read 829908 times)
December 28, 2013, 06:17:42 PM
December 28, 2013, 06:01:16 PM
So a moon in the graph means we are on target, if you dont have a moon in ur personal graph does that mean you arent on target??
According to coingeek, that's just some eye candy when we hit 100 btc for the day. Since he wouldn't be able to come up with a target value for each user I wouldn't expect to see anything on your personal graph.
Right. The moon means the pool is over 100 BTC for the day and we want it to go higher. (To the MOON). Just a little whimsy, and it might go away as unexpectedly as it arrived.
You'll see it on your personal graph too it you're over 100 BTC for the day. Everyone had a moon for about ten minutes earlier today while I was testing. If you still have one try refreshing your browser.
Challenge Accepted!!!
Now i just need to find 6000Mh to get a 100 BTC a day..........
December 28, 2013, 05:59:41 PM
So a moon in the graph means we are on target, if you dont have a moon in ur personal graph does that mean you arent on target??
According to coingeek, that's just some eye candy when we hit 100 btc for the day. Since he wouldn't be able to come up with a target value for each user I wouldn't expect to see anything on your personal graph.
Right. The moon means the pool is over 100 BTC for the day and we want it to go higher. (To the MOON). Just a little whimsy, and it might go away as unexpectedly as it arrived.
You'll see it on your personal graph too it you're over 100 BTC for the day. Everyone had a moon for about ten minutes earlier today while I was testing. If you still have one try refreshing your browser.
Im going to have to build 100 BTC a day setup now!!
December 28, 2013, 05:51:43 PM
You'll see it on your personal graph too it you're over 100 BTC for the day. Everyone had a moon for about ten minutes earlier today while I was testing. If you still have one try refreshing your browser.
Never had a better motivation for earning 100BTC... well, except earning 100BTC
December 28, 2013, 05:47:57 PM
So a moon in the graph means we are on target, if you dont have a moon in ur personal graph does that mean you arent on target??
According to coingeek, that's just some eye candy when we hit 100 btc for the day. Since he wouldn't be able to come up with a target value for each user I wouldn't expect to see anything on your personal graph.
Right. The moon means the pool is over 100 BTC for the day and we want it to go higher. (To the MOON). Just a little whimsy, and it might go away as unexpectedly as it arrived.
You'll see it on your personal graph too it you're over 100 BTC for the day. Everyone had a moon for about ten minutes earlier today while I was testing. If you still have one try refreshing your browser.
December 28, 2013, 05:39:24 PM
So a moon in the graph means we are on target, if you dont have a moon in ur personal graph does that mean you arent on target??
According to coingeek, that's just some eye candy when we hit 100 btc for the day. Since he wouldn't be able to come up with a target value for each user I wouldn't expect to see anything on your personal graph.
There was me thinking coingeek was telling us in a sly way to whip are rigs more...... faster rigs faster!!!!
December 28, 2013, 05:35:40 PM
So a moon in the graph means we are on target, if you dont have a moon in ur personal graph does that mean you arent on target??
According to coingeek, that's just some eye candy when we hit 100 btc for the day. Since he wouldn't be able to come up with a target value for each user I wouldn't expect to see anything on your personal graph.
December 28, 2013, 05:33:07 PM
So a moon in the graph means we are on target, if you dont have a moon in ur personal graph does that mean you arent on target??
December 28, 2013, 05:28:06 PM
I am impressed by the hasrates you all seem to get. None of my R9280Xs go higher than 710 (and they get very hot, above 90 all of them and as a result the speed is sometimes reduced as low as 550).
I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.
I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.
i'm not suggesting it, but i just got an MSI 280x which hit 90 degrees very quick before any overclocking
so i said fuck it and took off the heatsink (breaking the warranty sticker) and my god was that thing poorly seated. giant gobs of thermal paste, very poorly spread. carefully put a thin coat of arctic silver and replaced the heat sink, now it runs around 710Kh/s at 70 degrees
i also have a powercolor card that runs at about 740kh/s without overheating, but curiosity got the best of me so i checked that one and it's thermal paste was as expected (only improved temp by a few degrees)
I was shocked when i removed the cooler on an overheating sapphire 7970,
must of been half a tube in there!! all my cards i now do with sum arctic MX 2 December 28, 2013, 05:22:16 PM
Just wish I could figure out if it was somehow incompatible with middlecoin, or if I just need to wait longer to get a payout so I show up on the stats pages. 
You will show up on the stats page within 10 minutes of mining. You don't need to wait for a payout.
I think I heard about someone using the stratum-mining-proxy before here, but I'm not sure.
Ok then it definitely doesn't work.
December 28, 2013, 05:21:26 PM
What does the E stand for in 9.223E hash rate below?
http://postimg.org/image/l0ixqm0xd/
I assume its is multiply by 100?
These R9 290 cards were giving me 825ish Kh/s till today morning, no config changed, shows me 920ish now.
Very strange. Can someone explain plz.
http://postimg.org/image/l0ixqm0xd/
I assume its is multiply by 100?
These R9 290 cards were giving me 825ish Kh/s till today morning, no config changed, shows me 920ish now.
Very strange. Can someone explain plz.
The E is because the command screen cant fit the hash rate in completely, so will be a multiplier.
December 28, 2013, 05:16:40 PM
What does the E stand for in 9.223E hash rate below?
http://postimg.org/image/l0ixqm0xd/
I assume its is multiply by 100?
These R9 290 cards were giving me 825ish Kh/s till today morning, no config changed, shows me 920ish now.
Very strange. Can someone explain plz.
http://postimg.org/image/l0ixqm0xd/
I assume its is multiply by 100?
These R9 290 cards were giving me 825ish Kh/s till today morning, no config changed, shows me 920ish now.
Very strange. Can someone explain plz.
December 28, 2013, 05:14:57 PM
Just wish I could figure out if it was somehow incompatible with middlecoin, or if I just need to wait longer to get a payout so I show up on the stats pages.
You will show up on the stats page within 10 minutes of mining. You don't need to wait for a payout.
I think I heard about someone using the stratum-mining-proxy before here, but I'm not sure.
December 28, 2013, 05:12:33 PM
I use a mixture of cudaminer and cgminer across several workers.
They all point to a local stratum proxy using the above flags.
They all point to a local stratum proxy using the above flags.
That sounds way too advanced for me to help you out. why do you have a local stratum? there's absolutely no reason to.
I have a lot of hardware "all over the place" and it's much easier for me to have them all connect to a local server where I can control what pool and user/pass I am connecting all my workers with in one spot.
Manually changing a pool or user/pass on each of my workers would take me probably an hour+ of connecting monitors and keyboards around the house.
This is what the stratum proxy was designed for, and I use it all the time with other pools. It works great.
I am sorry if I missed it in one of your previous posts but I am assuming that you are using Linux because if you are on windows then the solution to your problem is Teamviewer.
You probably already know this though and are using Linux anyway I bet.
It's a combination of different OS.
I've found the stratum proxy method to be most convenient, much more so than remote desktop solutions. Workers stop when they cant reach the proxy, and automatically reconnect and resume when I bring the proxy back up. It makes for very easy pool / port / user / pass configuration changes.
Just wish I could figure out if it was somehow incompatible with middlecoin, or if I just need to wait longer to get a payout so I show up on the stats pages.
December 28, 2013, 04:28:39 PM
I use a mixture of cudaminer and cgminer across several workers.
They all point to a local stratum proxy using the above flags.
They all point to a local stratum proxy using the above flags.
That sounds way too advanced for me to help you out. why do you have a local stratum? there's absolutely no reason to.
I have a lot of hardware "all over the place" and it's much easier for me to have them all connect to a local server where I can control what pool and user/pass I am connecting all my workers with in one spot.
Manually changing a pool or user/pass on each of my workers would take me probably an hour+ of connecting monitors and keyboards around the house.
This is what the stratum proxy was designed for, and I use it all the time with other pools. It works great.
I am sorry if I missed it in one of your previous posts but I am assuming that you are using Linux because if you are on windows then the solution to your problem is Teamviewer.
You probably already know this though and are using Linux anyway I bet.
December 28, 2013, 04:23:27 PM
I use a mixture of cudaminer and cgminer across several workers.
They all point to a local stratum proxy using the above flags.
They all point to a local stratum proxy using the above flags.
That sounds way too advanced for me to help you out. why do you have a local stratum? there's absolutely no reason to.
I have a lot of hardware "all over the place" and it's much easier for me to have them all connect to a local server where I can control what pool and user/pass I am connecting all my workers with in one spot.
Manually changing a pool or user/pass on each of my workers would take me probably an hour+ of connecting monitors and keyboards around the house.
This is what the stratum proxy was designed for, and I use it all the time with other pools. It works great.
December 28, 2013, 04:21:19 PM
Any ideas why I am hashing around 4.2MH/s but it only says I am hashing around 3.1MH/s ?
Also, when I check CGMiner, I get a lot of stratum from pool 0 detected new block.... then the same message then maybe an accept then another few lines of new block detected? Is there something wrong ?
Also, when I check CGMiner, I get a lot of stratum from pool 0 detected new block.... then the same message then maybe an accept then another few lines of new block detected? Is there something wrong ?
All normal. Rates on the site will fluctuate.
December 28, 2013, 04:16:07 PM
Any ideas why I am hashing around 4.2MH/s but it only says I am hashing around 3.1MH/s ?
Also, when I check CGMiner, I get a lot of stratum from pool 0 detected new block.... then the same message then maybe an accept then another few lines of new block detected? Is there something wrong ?
Also, when I check CGMiner, I get a lot of stratum from pool 0 detected new block.... then the same message then maybe an accept then another few lines of new block detected? Is there something wrong ?
December 28, 2013, 04:12:06 PM
Just use -d option like:
cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....
Card 0 will have 2 thread and card 1 will have 1 thread.
cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....
Card 0 will have 2 thread and card 1 will have 1 thread.
Thanks a lot man!!
Finally my multicard rig can work with one instance!
I am fairly certain that you cannot do it this way. You need to run another instance of cgminer to run different thread settings.
I get exactly the same hash/s with multicard and -d (--device not disable) like every card in a single card setup. Don't know if they really get 1 or 2 thread but the result say me it's working.
Click on the cgminer command window frame and then hit the 'G' key and it will list the cards and thread counts.
December 28, 2013, 04:03:50 PM
How much payout will a 760 Khz give in bitcoins,every 24 hrs ?
If I could get paid on how often a question like this comes up, rather than mining, I would be a millionaire.
Even at 10p a question you'd be a millionaire now........ that or why are we mining doge coin, or what coin are we mining, or i have a better idea how this pool should work so do what i say.
Jump to: