Author

Topic: [ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 365. (Read 829908 times)

sr. member
Activity: 336
Merit: 250
Just use -d option like:

cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....

Card 0 will have 2 thread and card 1 will have 1 thread.

Thanks a lot man!!
Finally my multicard rig can work with one instance!

I am fairly certain that you cannot do it this way. You need to run another instance of cgminer to run different thread settings.
Yea you right, I was happy too soon, the crappy card still shows two threads.

How is the hash/s for each card, good or not ?
I get exactly the same hash/s with multicard and -d (--device not disable) like every card in a single card setup. Don't know if they really get 1 or 2 thread but the result say me it's working.
full member
Activity: 126
Merit: 100
How much payout will a 760 Khz give in bitcoins,every 24 hrs ?

If I could get paid on how often a question like this comes up, rather than mining, I would be a millionaire.
full member
Activity: 168
Merit: 100
How much payout will a 760 Khz give in bitcoins,every 24 hrs ?

Use the site to make a guess, there is no right answer only averages and guesses.

http://middlecoin2.s3-website-us-west-2.amazonaws.com/reports/1Lw1CwX9krtiisu469sa7F5W7Y3kvshPvk.html
is the address of a miner that gets an average of 750kh over a day.
sr. member
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
jr. member
Activity: 52
Merit: 10
How much payout will a 760 Khz give in bitcoins,every 24 hrs ?
sr. member
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
The two 7970's running at 788= 1130 core / 1745 mem,  I 13, G 2, 8192 tc. Brand is XFX on these.

The one 7970 running at 746= 1070 core / 1690 mem, I 13, G 2, 8192 tc. Brand is HIS

The lame 7970 running at 540= 1050 / 1500, I 13, G 1 (will not run at g2) 8192 tc. Brand is HIS

The two 290x's running at 880=  900 core / 1495 mem, I 20 , G 1, 32765 tc. Brand is XFX on these.

Pretty impressive on that XFX brand 7970. I can only get around 700 KH/s.

http://zsprawl.com/iOS/2013/12/mining-bitcoins-in-esxi-using-an-xfx-7970/

They have been running great for me. No complaints so far. Wink





full member
Activity: 168
Merit: 100
I am impressed by the hasrates you all seem to get. None of my R9280Xs go higher than 710 (and they get very hot, above 90 all of them and as a result the speed is sometimes reduced as low as 550).

I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.

i'm not suggesting it, but i just got an MSI 280x which hit 90 degrees very quick before any overclocking

so i said fuck it and took off the heatsink (breaking the warranty sticker) and my god was that thing poorly seated.  giant gobs of thermal paste, very poorly spread.  carefully put a thin coat of arctic silver and replaced the heat sink, now it runs around 710Kh/s at 70 degrees

i also have a powercolor card that runs at about 740kh/s without overheating, but curiosity got the best of me so i checked that one and it's thermal paste was as expected (only improved temp by a few degrees)
full member
Activity: 168
Merit: 100
It is gone now. Wink

Coingeek must be playing with the graphics.


I have it set now so if the days balance goes over 100 BTC a little moon will show in the upper right corner as a target.

To the Moon!

If anyone minds very much, especially h2o, I can take it off.

I dont mind anything you do really, you can H20 can do what you like while u make profit....... but if you dont........ no moon!!!!!!!!!
full member
Activity: 221
Merit: 100
It is gone now. Wink

Coingeek must be playing with the graphics.


I have it set now so if the days balance goes over 100 BTC a little moon will show in the upper right corner as a target.

To the Moon!

If anyone minds very much, especially h2o, I can take it off.
full member
Activity: 187
Merit: 100
Haha coingeek having fun.. loving it.
full member
Activity: 168
Merit: 100
Dam you coingeek, scared me for a second that my account was asleep or something.

full member
Activity: 140
Merit: 100
The two 7970's running at 788= 1130 core / 1745 mem,  I 13, G 2, 8192 tc. Brand is XFX on these.

The one 7970 running at 746= 1070 core / 1690 mem, I 13, G 2, 8192 tc. Brand is HIS

The lame 7970 running at 540= 1050 / 1500, I 13, G 1 (will not run at g2) 8192 tc. Brand is HIS

The two 290x's running at 880=  900 core / 1495 mem, I 20 , G 1, 32765 tc. Brand is XFX on these.

Pretty impressive on that XFX brand 7970. I can only get around 700 KH/s.

http://zsprawl.com/iOS/2013/12/mining-bitcoins-in-esxi-using-an-xfx-7970/
sr. member
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
It is gone now. Wink

Coingeek must be playing with the graphics.
full member
Activity: 168
Merit: 100
hmmm maybe, i thought it was due to maybe being night time so no real trading, but its should all be auto trade.

Its now on the main site aswell.
sr. member
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
I might have missed this over the last few days, but whats with the little half moon that now appears on my page graphics???
Possible reference to the term:

"To tha moon"   Wink
full member
Activity: 168
Merit: 100
I might have missed this over the last few days, but whats with the little half moon that now appears on my page graphics???
member
Activity: 64
Merit: 10
But also cudaminer can connect via -o stratum+tcp://... -O USERNAME:PWD so no need for an proxy.
full member
Activity: 168
Merit: 100
I use a mixture of cudaminer and cgminer across several workers.

They all point to a local stratum proxy using the above flags.

I don't have an answer to your problem, but can I ask why you do this instead of just straight cgminer?

I run the same, the new cuda miner has really help out my Nv cards, otherwise cgminer is crap for the Nv cards.
full member
Activity: 187
Merit: 100
I use a mixture of cudaminer and cgminer across several workers.

They all point to a local stratum proxy using the above flags.

That sounds way too advanced for me to help you out. why do you have a local stratum? there's absolutely no reason to.
full member
Activity: 126
Merit: 100
I use a mixture of cudaminer and cgminer across several workers.

They all point to a local stratum proxy using the above flags.

I don't have an answer to your problem, but can I ask why you do this instead of just straight cgminer?
Jump to: