Pages:
Author

Topic: [ANN] [PXC] Phoenixcoin v0.6.6.2 ~ NeoScrypt Original ~ 8 Years Old - page 31. (Read 136330 times)

full member
Activity: 132
Merit: 100
Walking alone in the darkness
In favor of ghostlander and my favorite coin!
New pool, try it. Low fees.

Other neoscrypt coins and multi-algo will be soon (hope that week)


Mining info:
Use the following parameters at your preferred mining software (replace WALLET with your wallet address):
Code:
-a neoscrypt -o stratum+tcp://dev.flap-pool.world:4233 -u WALLET -p c=PXC

Payments info:

1 time in 60 minutes
legendary
Activity: 1242
Merit: 1020
No surrender, no retreat, no regret.
There's a reason ghostlander/John picked the "Welcome to Hell" avatar...  Wink

Back in 2013 when I picked up this coin from ashes, Bushstar told me that it wasn't worth the effort and going to cost me dearly. Most people care only about quick profits and don't give a damn about those who do the actual work no matter how big or small it is. He got his share of insults, too, though deserved none and just quit one day. Maybe I'm more thick skinned and learnt how to ignore the ignorant, but he was right in general.
legendary
Activity: 1242
Merit: 1020
No surrender, no retreat, no regret.
Dev, can you optimize blockchain by generating several large blocks with low difficulty
that will be containing generation transactions in the amount of unspent outputs PXC
for faster syncronization? Can you do it regular? Do you have money burn-address?

Such a thing you call a block chain optimisation requires a hard fork and isn't necessary at all. This coin is 4 years old, so yes, it takes some time to get sync'ed. Although not very much time, just a day or so. I can optimise the block index a bit more, but it isn't going to make a noticeable difference.


atlas.phoenixcoin.org is stuck mining on block 1494351.  The graph seems to show new blocks but 'recent blocks' is still showing 1494351 as the last, as well as the miner still working on that already found block.  I really liked this P2Pool thing, payouts were finally in line with expectation, unlike most big pools.

Unfortunately I can't find any other pool but the blocks factory, who charge 5%!  WTF?  Anyone know of any other pools?  I can solo mine in QT but I'm not synced yet, and it uses CPUMiner.  Can I change the solo mining software and parameters in QT?

As far as I'm aware, my PXC p2pools are working well. The front end may display odd things sometimes, but all valid shares are accounted for and the payouts are fair. TBF used to charge 1.5% for PXC in the past, but we have what we have now.
newbie
Activity: 86
Merit: 0
The more you know about your customers, the more you can provide to them information that is increasingly useful, relevant, and persuasive.
full member
Activity: 210
Merit: 100
AltMiner.Net | Low-Fee Pool | 2hr Payout
🛠 Mining pool update 🛠

https://altminer.net
Low latency, scalable and secure mining pool infrastructure
Currently only 0.45% fee (PROMO)
Automatic payouts every 120 minutes
No registration required



AltMiner.net was also attacked by the recent yiimp hacks (further information here: https://bitcointalksearch.org/topic/multiple-yiimp-pools-hacked-this-is-what-we-know-so-far-2163058)
We were offline several days securing our servers, recreating all wallets and adding several additional layers of security. Not only we have now added an intrustion prevention system with anomaly detection, we also added DDoS protection and several further measures.

Now we think it is again safe to mine with us and we thank you for your patience during those hard days. As a bonus for your trust we currently have lowered all fees to only 0.45%!

If you have any questions feel free to contact us!


▶️▶️▶️ How to mine❓
Use the following parameters at your preferred mining software (replace WALLET with your wallet address):
Code:
-a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u WALLET -p c=PXC


full member
Activity: 150
Merit: 100
caeruleum arca archa
atlas.phoenixcoin.org is stuck mining on block 1494351.  The graph seems to show new blocks but 'recent blocks' is still showing 1494351 as the last, as well as the miner still working on that already found block.  I really liked this P2Pool thing, payouts were finally in line with expectation, unlike most big pools.

That's just the website block listing, I don't think it has anything to do with the current block being mined. At one time several weeks ago, it was stuck on some block from three years ago, but the pool was still perfectly functional. They just fixed whatever was the problem, but perhaps it still gets "stuck" sometimes.

Unfortunately I can't find any other pool but the blocks factory, who charge 5%!  WTF?  Anyone know of any other pools?  I can solo mine in QT but I'm not synced yet, and it uses CPUMiner.  Can I change the solo mining software and parameters in QT?

There's hexpool.com and altminer.net where you can mine directly for coins (both are still offline due to the yiimp hack), or the zpool multipool that has to go through a btc-pxc conversion on internal exchange (they're operational).
full member
Activity: 1588
Merit: 214
Dev, can you optimize blockchain by generating several large blocks with low difficulty
that will be containing generation transactions in the amount of unspent outputs PXC
for faster syncronization? Can you do it regular? Do you have money burn-address?

I can solo mine in QT but I'm not synced yet, and it uses CPUMiner.  Can I change the solo mining software and parameters in QT?
You can using ccminer with -a neoscrypt, I doing it. 2500 kH/s from 2x1080ti.
newbie
Activity: 31
Merit: 0
atlas.phoenixcoin.org is stuck mining on block 1494351.  The graph seems to show new blocks but 'recent blocks' is still showing 1494351 as the last, as well as the miner still working on that already found block.  I really liked this P2Pool thing, payouts were finally in line with expectation, unlike most big pools.

Unfortunately I can't find any other pool but the blocks factory, who charge 5%!  WTF?  Anyone know of any other pools?  I can solo mine in QT but I'm not synced yet, and it uses CPUMiner.  Can I change the solo mining software and parameters in QT?
newbie
Activity: 6
Merit: 0
guys could some body provide fresh nodes list? my pool wallet get's only 2 connections.... v 0.6.6.1
addnode = prometheus.phoenixcoin.org: 9555
addnode = menoetius.phoenixcoin.org: 9555
addnode = atlas.phoenixcoin.org: 9555
addnode = 96.19.102.106
addnode = 162.217.250.114
addnode = 174.21.163.65
addnode = 185.53.128.119
addnode = 74.65.234.126
addnode = 72.78.100.7
addnode = 185.26.124.95
full member
Activity: 132
Merit: 100
Walking alone in the darkness
guys could some body provide fresh nodes list? my pool wallet get's only 2 connections.... v 0.6.6.1
sr. member
Activity: 518
Merit: 261
I must say I am on the fence about this coin. From what I've read, I don't believe anyone has come out and said "This is a scam coin." So if it's not a scam coin, that puts it one level above shitcoin for me. On the other hand, there doesn't appear to be any type of development so....... Huh?

All I know is that it's popped up on 'what to mine' and so I mine it. Sometimes. That's my 2 cents on this coin.

Now, I have 2 questions. 1) Can you mine it directly to Cryptopia? Because on Cryptopia's site it says not to mine directly to their wallet. 2) Apparently I have encrypted my wallet. (I have the password) There doesn't seem to be a "unlock wallet" option, however, someone gave me the command to unlock the wallet for a certain amount of time. I suppose that's ok, but is there a way to unlock it until I shut the wallet down? If so, what is that command? Thanks.

yes its a shitcoin, no matter the fanboy said in the last post, a coin with no development or project is a shit. You see dogecoin ? its the same.

Yes, you can mine directly to Cryptopia, thats what i did in the past 5000 PXC directly to my exchange wallet, and no problem at all. Using hexpool pool
newbie
Activity: 54
Merit: 0
I must say I am on the fence about this coin. From what I've read, I don't believe anyone has come out and said "This is a scam coin." So if it's not a scam coin, that puts it one level above shitcoin for me. On the other hand, there doesn't appear to be any type of development so....... Huh?

All I know is that it's popped up on 'what to mine' and so I mine it. Sometimes. That's my 2 cents on this coin.

Now, I have 2 questions. 1) Can you mine it directly to Cryptopia? Because on Cryptopia's site it says not to mine directly to their wallet. 2) Apparently I have encrypted my wallet. (I have the password) There doesn't seem to be a "unlock wallet" option, however, someone gave me the command to unlock the wallet for a certain amount of time. I suppose that's ok, but is there a way to unlock it until I shut the wallet down? If so, what is that command? Thanks.
full member
Activity: 362
Merit: 102
ranked in 7th place on whattomine! I'm about to get me some.
full member
Activity: 150
Merit: 100
caeruleum arca archa
no rage dude, you are supporting a shit that have no devs or project, the actual owner is just making money on your back and you are happy lol ...
So in your frame of mind you think I'm "raging". Huh — interesting, but not really, just silly. I don't know ghostlander from Adam, and neither you nor he knows me (but I also don't hide behind a silly forum avatar talking smack either - how about you?).

Try taking the time to know who the coin devs are, what they've done or said over the years, and not denigrate older coins because they don't have a huge list of (typically broken) promises on a "roadmap".

I can't figure out your logic in how "he's making money off my back"; all I've done is what you've done — mined some coins, kept some, sold/traded some. No-one pays him a thing; in fact, just the opposite — he has to pay out of pocket for all those servers that support his own coins.

There's a reason ghostlander/John picked the "Welcome to Hell" avatar...  Wink
sr. member
Activity: 518
Merit: 261
why you dont mine directly to exchange ? you are wasting time by downloading the blockchain, this is just a shit coin dude, mine and sell ...
Spoken like someone who:
— likes to talk shitcoin, cause it's cool to say shitcoin
— probably mines with his gamebox when he's not playing Witcher
— has never touched anything but Windows because, y'know, JEUX
— has no concept or appreciation for crypto technology
— just loves saying shitcoin, 'cause it's really all about that FIAT

Either go away or, better yet, go make a coin that ain't shit according to you, so you can show us all what that looks like. Kiss

no rage dude, you are supporting a shit that have no devs or project, the actual owner is just making money on your back and you are happy lol ...
i have no rage about that, i am mining with 1080ti SLI at home and 1x980  at work. I you want, i can send you some PXC if you need something to eat, pm me your adress .
full member
Activity: 150
Merit: 100
caeruleum arca archa
why you dont mine directly to exchange ? you are wasting time by downloading the blockchain, this is just a shit coin dude, mine and sell ...
Spoken like someone who:
— likes to talk shitcoin, cause it's cool to say shitcoin
— probably mines with his gamebox when he's not playing Witcher
— has never touched anything but Windows because, y'know, JEUX
— has no concept or appreciation for crypto technology
— just loves saying shitcoin, 'cause it's really all about that FIAT

Either go away or, better yet, go make a coin that ain't shit according to you, so you can show us all what that looks like. Kiss
sr. member
Activity: 518
Merit: 261
Hi,

I was wondering if someone could help me. I'm new to Phoenixcoin and the wallet. I download and installed the wallet; it's currently downloading the blockchain. The problem is that there is no address listed in the wallet. All the wallet's I've used in the past, generated a default wallet address.

I would like to solo mine as soon as the bc downloads, but need an address.

Can someone tell me how to generate an address in the wallet?

Thanks in advance!

Mog

PS. And if anyone know's where I can download the block chain directly, let me know Smiley Have several hours left...

why you dont mine directly to exchange ? you are wasting time by downloading the blockchain, this is just a shit coin dude, mine and sell ...
newbie
Activity: 5
Merit: 0
Hi,

I was wondering if someone could help me. I'm new to Phoenixcoin and the wallet. I download and installed the wallet; it's currently downloading the blockchain. The problem is that there is no address listed in the wallet. All the wallet's I've used in the past, generated a default wallet address.

I would like to solo mine as soon as the bc downloads, but need an address.

Can someone tell me how to generate an address in the wallet?

Thanks in advance!

Mog

PS. And if anyone know's where I can download the block chain directly, let me know Smiley Have several hours left...
full member
Activity: 150
Merit: 100
caeruleum arca archa
Many pools are down

what to do now where to mine Phoenix
i think you can continue , this is only the front end who is down. but i suggest to wait to be sure, dump that coin , and wait for the hack to end

You can always mine PXC at a p2pool like http://atlas.phoenixcoin.org:10554/static/

Yes, yiimp-based pools (hexpool, zpool, altminer, etc.) were hacked, but altminer is indicating pool wallets may have been compromised. I can confirm payouts were continuing, albeit at very reduced levels, so miner beware...

Cryptopia's PXC wallet node list is being updated — notice just posted today:
Code:
9th September - We have added new nodes to the wallet and have put it into maintenance
to give it an opportunity to catch up to the block-chain.
sr. member
Activity: 518
Merit: 261
Many pools are down


what to do now where to mine Phoenix


I received my payment from hexpool about 50 minutes ago what does that mean? is it ok to mine there or better switch

i think you can continue , this is only the front end who is down. but i suggest to wait to be sure, dump that coin , and wait for the hack to end
Pages:
Jump to: