Pages:
Author

Topic: [ANN] [QRK] Quark | POW/POS | 0.10.6.3 - New Self Moderated Thread - page 12. (Read 64318 times)

jr. member
Activity: 180
Merit: 4
0.17.0.3 worked stable, with 0.17.0.4 there are again problems. The wallets loose over the day 3-4 times their blockchain. There are already more than 51% nodes 0.17.0.4 in the chain, but not all are correct recognized. And there are again crashing wallets, not so often like with 0.17.0.1, but it happens again.

And MN is always online, but only sometime got rewards. in 7.3 MN rewards was good, continous. In 7.4 not continous...

Yes, we have the same problem.


When my wallet gets stuck though I need to reboot

But my MN didn't go down

My rewards were still allocated to me on time
jr. member
Activity: 180
Merit: 4
POS is successfully produced!

On block 7236756
https://chainz.cryptoid.info/qrk/block.dws?7236756.htm

AEX has been notified
They are expected to reopen deposits and withdrawals in the coming days
newbie
Activity: 56
Merit: 0
0.17.0.3 worked stable, with 0.17.0.4 there are again problems. The wallets loose over the day 3-4 times their blockchain. There are already more than 51% nodes 0.17.0.4 in the chain, but not all are correct recognized. And there are again crashing wallets, not so often like with 0.17.0.1, but it happens again.

And MN is always online, but only sometime got rewards. in 7.3 MN rewards was good, continous. In 7.4 not continous...

Yes, we have the same problem.
newbie
Activity: 9
Merit: 0
0.17.0.3 worked stable, with 0.17.0.4 there are again problems. The wallets loose over the day 3-4 times their blockchain. There are already more than 51% nodes 0.17.0.4 in the chain, but not all are correct recognized. And there are again crashing wallets, not so often like with 0.17.0.1, but it happens again.

And MN is always online, but only sometime got rewards. in 7.3 MN rewards was good, continous. In 7.4 not continous...
jr. member
Activity: 180
Merit: 4
0.17.0.3 worked stable, with 0.17.0.4 there are again problems. The wallets loose over the day 3-4 times their blockchain. There are already more than 51% nodes 0.17.0.4 in the chain, but not all are correct recognized. And there are again crashing wallets, not so often like with 0.17.0.1, but it happens again.

So far we haven't seen any crashes on our side
But it will get stuck at a certain height and need to restart the wallet to fix it

The reason for this phenomenon may be that the output POS is stuck

I generated 1 POS block
But it got stuck on one confirmation
It has not been accepted on the net

Using 7.4 is still not enough
Many people are still using 7.3

Need to see more time
newbie
Activity: 56
Merit: 0
0.10.7.3 worked stable, with 0.10.7.4 there are again problems. The wallets loose over the day 3-4 times their blockchain. There are already more than 51% nodes 0.10.7.4 in the chain, but not all are correct recognized. And there are again crashing wallets, not so often like with 0.10.7.1, but it happens again.
newbie
Activity: 59
Merit: 0
I notice I can only run the program. It doesn't really install? So I can't really uninstall it either? I look in the add remove programs and no Quark program is listed? It runs but never connects to the node? I guess it uninstalls on shut down?  Huh Zero active connections to Quark Network after running for 12 minutes?
What OS are you using? What does your quarkcoin.conf look like?


Windows 7.                      Quarkcoin.conf? Where is that?   

Windows quarkcoin.conf location:

Go to Start -> Run (or press WinKey+R) and run this:  %APPDATA%\Quarkcoin

If you don't know where it is you probably don't have one. You will find instructions for its creation listed in this thread previously.
sr. member
Activity: 389
Merit: 250
I notice I can only run the program. It doesn't really install? So I can't really uninstall it either? I look in the add remove programs and no Quark program is listed? It runs but never connects to the node? I guess it uninstalls on shut down?  Huh Zero active connections to Quark Network after running for 12 minutes?
What OS are you using? What does your quarkcoin.conf look like?


Windows 7.                      Quarkcoin.conf? Where is that?   
sr. member
Activity: 389
Merit: 250
additionally:
i sent some QRK onto the new 10.7.4 wallet,... it was pending for 24hrs... restarted it and then it finally said that it was confirmed, i guess it did not update the transaction while the wallet was open? just after restarting the wallet it got confirmed,...

im going to send some QRK coins again to see if that problem occurs...


How did you get your wallet to work? No Block source available.
newbie
Activity: 12
Merit: 0
additionally:
i sent some QRK onto the new 10.7.4 wallet,... it was pending for 24hrs... restarted it and then it finally said that it was confirmed, i guess it did not update the transaction while the wallet was open? just after restarting the wallet it got confirmed,...

im going to send some QRK coins again to see if that problem occurs...
newbie
Activity: 59
Merit: 0
I notice I can only run the program. It doesn't really install? So I can't really uninstall it either? I look in the add remove programs and no Quark program is listed? It runs but never connects to the node? I guess it uninstalls on shut down?  Huh Zero active connections to Quark Network after running for 12 minutes?
What OS are you using? What does your quarkcoin.conf look like?
sr. member
Activity: 389
Merit: 250
I notice I can only run the program. It doesn't really install? So I can't really uninstall it either? I look in the add remove programs and no Quark program is listed? It runs but never connects to the node? I guess it uninstalls on shut down?  Huh Zero active connections to Quark Network after running for 12 minutes?
newbie
Activity: 56
Merit: 0
At the moment the wallets often "lose" the current blockchain. A restart solves this problem, but it's annoying because it sets the MN to "missing". As already written, the number of MNs in the new version 0.10.7.4 in the mentioned Blockchain Explorer is not correct, there should be more.

Why don't you increase the stake with a new version and force the operators of old versions to update their nodes? So there are always leftovers of the old versions and it becomes more and more difficult to reach the necessary 51%.
jr. member
Activity: 180
Merit: 4
Quote
When enough supporters use 0.10.7.4
POS can produce correctly
If it's so great and we need it so bad, why not list it here?
The link was posted earlier today, just a few posts before yours.
https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.4


They erased the link I listed. I'm talking about the Quark Website listed on Coinmarket Cap. If you listed it there you would get much more traffic. If I down load it and install will I be able to synch the wallet?
We are continually trying to notify these listing sites, they are proving difficult to get in contact with and update their records.
If you download the latest version you will be able to synch the wallet.  You can always add the latest nodes list from cryptoid blockchain explorer which is up to date. Here:
https://chainz.cryptoid.info/qrk/#!network

I downloaded v0.10.7.4     (3 weeks behind  No Block Source Available)........... WTF?



Some unknown reason may cause the card to be stuck at this height

You can remove blocks and reload them

Some of these blocks can be downloaded here
https://mega.nz/#!Xy4VCKJR!3VbR-HzV2VDnmNG0tgQTYfa72Gs3EtOsAvugx_e-y5Y


In addition, if you cannot connect to the node, you can view it in Explorer and add some
sr. member
Activity: 389
Merit: 250
Quote
When enough supporters use 0.10.7.4
POS can produce correctly
If it's so great and we need it so bad, why not list it here?
The link was posted earlier today, just a few posts before yours.
https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.4


They erased the link I listed. I'm talking about the Quark Website listed on Coinmarket Cap. If you listed it there you would get much more traffic. If I down load it and install will I be able to synch the wallet?
We are continually trying to notify these listing sites, they are proving difficult to get in contact with and update their records.
If you download the latest version you will be able to synch the wallet.  You can always add the latest nodes list from cryptoid blockchain explorer which is up to date. Here:
https://chainz.cryptoid.info/qrk/#!network

I downloaded v0.10.7.4     (3 weeks behind  No Block Source Available)........... WTF?


full member
Activity: 229
Merit: 100
Quote
When enough supporters use 0.10.7.4
POS can produce correctly
If it's so great and we need it so bad, why not list it here?
The link was posted earlier today, just a few posts before yours.
https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.4


They erased the link I listed. I'm talking about the Quark Website listed on Coinmarket Cap. If you listed it there you would get much more traffic. If I down load it and install will I be able to synch the wallet? 
We are continually trying to notify these listing sites, they are proving difficult to get in contact with and update their records.
If you download the latest version you will be able to synch the wallet.  You can always add the latest nodes list from cryptoid blockchain explorer which is up to date. Here:
https://chainz.cryptoid.info/qrk/#!network

newbie
Activity: 1
Merit: 0
Hey,
could someone post step by step commands to setup masternode? I seems to be far more complicated than pivx clones I used before and apparently this
https://pastebin.com/iggH4B75
and this https://github.com/quark-project-evolution/quark/blob/master/doc/build-unix.md
doesn't work anymore..
it seems I got to the end but no deamon / cli is available...
sr. member
Activity: 389
Merit: 250
Quote
When enough supporters use 0.10.7.4
POS can produce correctly
If it's so great and we need it so bad, why not list it here?
The link was posted earlier today, just a few posts before yours.
https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.4


They erased the link I listed. I'm talking about the Quark Website listed on Coinmarket Cap. If you listed it there you would get much more traffic. If I down load it and install will I be able to synch the wallet? 
full member
Activity: 229
Merit: 100
Quote
When enough supporters use 0.10.7.4
POS can produce correctly
If it's so great and we need it so bad, why not list it here?
The link was posted earlier today, just a few posts before yours.
https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.4
sr. member
Activity: 389
Merit: 250
Quote
When enough supporters use 0.10.7.4

POS can produce correctly

If it's so great and we need it so bad, why not list it here?

Pages:
Jump to: