Topic: [ANN] Ravencoin [RVN] PoW GPU Mining | Asset Transfer Blockchain (Updated ANN) - page 162. (Read 1170617 times)

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

What brand are those 1060's? Zotac mini crap? Seemed too hot to me considering that the fans are running at full power. I mean 75 degrees C are OK but not while having the fans at full speed. Your fans will probably die before your cards do.

Other than that, you are doing OK. You may try to run at %80 Power LvL also. Did you test at a lower lvl? Might help with the temperature too.

They are inno3d single fan. Was the first reasonable priced cards I saw since the drought. They all have Samsung memory though.
I had it running at 65w but increased to see if I would get better hashrate. I will try 80w and see how that goes.

I use the Curve function in the Core Clock in Afterburner menu. The voltage is fixed at 800mV, the frequency of three video cards is from 1645 to 1759 MHz (matched to stability after stress tests). Single-fan MSI GTX1060 Aero 3Gb, temperatures up to 61 degrees in a closed case CM Haf X. Hashrate approximately 5 MH / s per card, z-enemy 1.08. Screenshot of AfterBurner in the attachment. I apologize for my English.
https://yadi.sk/i/0KLR5rYP3VaXgY

cryptodunno

member

Activity: 308

Merit: 10

Quote from: XCNP on May 08, 2018, 01:08:33 PM

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

What brand are those 1060's? Zotac mini crap? Seemed too hot to me considering that the fans are running at full power. I mean 75 degrees C are OK but not while having the fans at full speed. Your fans will probably die before your cards do.

Other than that, you are doing OK. You may try to run at %80 Power LvL also. Did you test at a lower lvl? Might help with the temperature too.

They are inno3d single fan. Was the first reasonable priced cards I saw since the drought. They all have Samsung memory though.
I had it running at 65w but increased to see if I would get better hashrate. I will try 80w and see how that goes.

i suggest you need tp decrease power limit to lower the temps.
75C is very high, I`ve heard a lot of times that it`s not recomended to run GPUs over 70C for 24/7, as there is a chance to kill your GPU very fast

juhakall

sr. member

Activity: 658

Merit: 250

I just realized that the transaction fees on Raven are so absurdly low, there's nothing stopping my pool from paying out every 420 seconds (7 minutes). There's also no fee.

http://rvn.elitehash.net

BiteByte

member

Activity: 248

Merit: 10

+Merit NOW or I kung fu you

It can be said based on circulating supply that RVN coin is undervalued. After few sessions of mini corrections it has found new floor at current price. It seems that market will gain huge share suddenly taking off and not watching back whenever this happens. This sleeping giant can be next big thing to surprise unaware people.

Your words give me warm fuzzies sir, and I agree with you wholeheartedly.

mindrust

legendary

Activity: 3276

Merit: 2442

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

What brand are those 1060's? Zotac mini crap? Seemed too hot to me considering that the fans are running at full power. I mean 75 degrees C are OK but not while having the fans at full speed. Your fans will probably die before your cards do.

Other than that, you are doing OK. You may try to run at %80 Power LvL also. Did you test at a lower lvl? Might help with the temperature too.

They are inno3d single fan. Was the first reasonable priced cards I saw since the drought. They all have Samsung memory though.
I had it running at 65w but increased to see if I would get better hashrate. I will try 80w and see how that goes.

Memory brand don't affect Raven hashrate at all. It is not like ETH.

My prediction was close enough, your cards are mini type/single fan cards. Those usually are known for dying faster than the bigger/2 fan models. I would keep them cool.

shenery

newbie

Activity: 18

Merit: 0

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

What brand are those 1060's? Zotac mini crap? Seemed too hot to me considering that the fans are running at full power. I mean 75 degrees C are OK but not while having the fans at full speed. Your fans will probably die before your cards do.

Other than that, you are doing OK. You may try to run at %80 Power LvL also. Did you test at a lower lvl? Might help with the temperature too.

They are inno3d single fan. Was the first reasonable priced cards I saw since the drought. They all have Samsung memory though.
I had it running at 65w but increased to see if I would get better hashrate. I will try 80w and see how that goes.

I have my target temperature set I'm smos to 69c. If I increase the target temperature surely my fan speed will come down no?

shenery

newbie

Activity: 18

Merit: 0

Quote from: PirloCrypt on May 08, 2018, 01:58:45 PM

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

What brand are those 1060's? Zotac mini crap? Seemed too hot to me considering that the fans are running at full power. I mean 75 degrees C are OK but not while having the fans at full speed. Your fans will probably die before your cards do.

Other than that, you are doing OK. You may try to run at %80 Power LvL also. Did you test at a lower lvl? Might help with the temperature too.

They are inno3d single fan. Was the first reasonable priced cards I saw since the drought. They all have Samsung memory though.
I had it running at 65w but increased to see if I would get better hashrate. I will try 80w and see how that goes.

shenery

newbie

Activity: 18

Merit: 0

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

8 cards on 750W PSU?? Really?

No sorry i have 8 cards and 2 750w PSU's. 4 cards with risers per psu.

PirloCrypt

newbie

Activity: 2

Merit: 0

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

8 cards on 750W PSU?? Really?

mindrust

legendary

Activity: 3276

Merit: 2442