Topic: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers - page 16. (Read 90635 times)
June 21, 2014, 05:43:05 AM
I see waiting and resuming message times with this version.Did you guys see that?
June 21, 2014, 05:27:42 AM
I would like too for jackpot 
June 21, 2014, 05:25:17 AM
Can you add jackpot coin kernel and tweak it 
Right now it looks terrible compared to 750ti
Right now it looks terrible compared to 750ti June 21, 2014, 05:18:59 AM
I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards.... 
Have you tried installing 14.6 beta drivers and they compiling bins for 5xxx? I have this cards too but my rig is far far away, so I can't install drivers remote and I'm waiting for Cypress and Juniper bins
June 21, 2014, 05:16:34 AM
I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards....
June 21, 2014, 04:55:07 AM
This worked for me:
14.4 or previous -> DDU -> 14.6 -> make your .bins (lots of them
) -> DDU -> 14.4 -> enjoy...I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...
Yesterday, someone said something about putting 14.6 opencl files (dlls?) in sgminer folder, and then compile the bin files (start sgminer).
I tried a bit, but couldn't figure it out...
June 21, 2014, 04:20:28 AM
So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.
Anyways link here (it's just the bins, don't worry):
https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg
Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.
Anyways link here (it's just the bins, don't worry):
https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg
Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.
I used this bin and it increase my 7970 card hash rate from 2500 to 3200MH/s.
Is it possible for you to create a X13 bin?
June 21, 2014, 04:06:43 AM
Anyone have a .bin file for HD 6970 currently getting 1.6mhs.
June 21, 2014, 03:59:33 AM
this bin for R270 https://dl.dropboxusercontent.com/u/58576741/x11modPitcairnglg2tc8128w256l4.bin work fine with me 40% up
2850KH/s with this .bin and 14.4 drivers. 30% improvement for me, with the old miner - 2200KH/s.
June 21, 2014, 03:54:54 AM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?
https://litecointalk.org/index.php?topic=11761.0
Link doesn't appear to be working for the 14.6 modded .infs. Perhaps someone will come along with a mirror.
June 21, 2014, 03:44:58 AM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?
June 21, 2014, 03:43:22 AM
Windows 8.1 here with a 7950.
Went from 2.6MH/s to 3.6MH/s.
Went from 2.6MH/s to 3.6MH/s.
June 21, 2014, 03:41:36 AM
Weird......
I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod
Anyone know what's the problem?
I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod
Anyone know what's the problem?
Did you delete and recreate the .bin files?
Wuh Im on windows. I thought the installer just overwrites the files.
The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).
Yes I've deleted them. I tried both 14.4 and 14.6 beta but for some strange reason, it gives almost the EXACT hashrate as the last sph-sgminer with x11-mod kernal.
Yeah, I also got no improvement on my 280x.
June 21, 2014, 03:39:27 AM
Weird......
I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod
Anyone know what's the problem?
I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod
Anyone know what's the problem?
Did you delete and recreate the .bin files?
Wuh Im on windows. I thought the installer just overwrites the files.
The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).
Yes I've deleted them. I tried both 14.4 and 14.6 beta but for some strange reason, it gives almost the EXACT hashrate as the last sph-sgminer with x11-mod kernal.
June 21, 2014, 03:16:10 AM
So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.
Anyways link here (it's just the bins, don't worry):
https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg
Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.
Anyways link here (it's just the bins, don't worry):
https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg
Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.
Thanks, will test the bins for x13 7950, should be the same as 280x(256,8192) i think.
June 21, 2014, 03:01:43 AM
Weird......
I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod
Anyone know what's the problem?
I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod
Anyone know what's the problem?
Did you delete and recreate the .bin files?
Wuh Im on windows. I thought the installer just overwrites the files.
The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).
June 21, 2014, 02:59:51 AM
this is no use for r9 270/270x , right ?
Yes tried it on 270x too.. No increase on hashrate.
No increase in speed at all... 280x
are you sure you run 14.6 (or latest beta on linux ?)
+1MHs / 280x on my side. and Server sees it too.
June 21, 2014, 02:47:45 AM
this bin for R270 https://dl.dropboxusercontent.com/u/58576741/x11modPitcairnglg2tc8128w256l4.bin work fine with me 40% up
June 21, 2014, 12:00:19 AM
So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.
Anyways link here (it's just the bins, don't worry):
https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg
Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.
Anyways link here (it's just the bins, don't worry):
https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg
Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.
June 20, 2014, 11:50:24 PM
Well, tried it out on 14.6 driver and was getting accepted shares. Which I was not woth any other version of sgminer with 14.6
However, it appears that there maybe a problem with the drivers because if you check GPU-Z you will notice that the clock speeds don't change meaning you always running on default clocks.
However, it appears that there maybe a problem with the drivers because if you check GPU-Z you will notice that the clock speeds don't change meaning you always running on default clocks.
Jump to: