[ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers - page 14.

volodzya

newbie

Activity: 10

Merit: 0

Quote from: bullus on June 21, 2014, 05:38:06 PM

Quote from: volodzya on June 21, 2014, 05:09:20 PM

@bullus,

can you post your config ?

Code:


],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}

6970@950/1375~2300kh/s x11

how many cards do you have in the rig ? are all 6970 ? what cpu / ram have you ?

p.s. thnx for the reply

bullus

sr. member

Activity: 294

Merit: 250

Quote from: volodzya on June 21, 2014, 05:09:20 PM

@bullus,

can you post your config ?

Code:


],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}

6970@950/1375~2300kh/s x11

volodzya

newbie

Activity: 10

Merit: 0

@bullus,

can you post your config ?

oktay50000

sr. member

Activity: 560

Merit: 250

i upgraded my farm with this miner and driver to 14.6
linux rigs works fine for some time and then droping hash rate after waiting work ....

windows is better but sometimes getting waitin for work

any fix for linux
?

oktay50000

sr. member

Activity: 560

Merit: 250

Quote from: rudarSRB on June 21, 2014, 04:04:29 PM

Works like a charm Wink

mine works like charm too mate but...
have you checked graph on after burner for hickups?
you dont have waiting for pool message???
can yougive me link of sgminer you are using?
i am using 14.6 beta and sgminer fixed

smtn512

newbie

Activity: 34

Merit: 0

Quote from: gmerk on June 21, 2014, 11:11:39 AM

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

Did this... 14.4 drivers with 14.6 opencl files in sgminer folder. Msi 7790s up from 1.17mh to 1.62mh. Sapphire 270s up from 2mh to 2.72mh. If anyone is interested in my configs I'll post them upon request.

Quote from: restless on June 21, 2014, 07:58:08 AM

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...

Yes these little things are great power savers, and they run so cool...wish I had bought more last December when they were .1btc each. I'm very curious to know whats in your 1.8mh config...

rudarSRB

full member

Activity: 220

Merit: 100

Works like a charm Wink

oktay50000

sr. member

Activity: 560

Merit: 250

you guys are okay?
are you getting waiting for work from pools with fixed version??
its annoying when it wants to start
i need to restart sgminer several times to get it to work
some times getting black screen on miner too Huh

volodzya

newbie

Activity: 10

Merit: 0

Quote

What clocks is your 6970 running at?

950/1375 ~2300kh/s with an older binfile..no increase seen with the new 14.6miner and or cl files

899/1399

bullus

sr. member

Activity: 294

Merit: 250

Quote from: volodzya on June 21, 2014, 03:46:30 PM

Quote from: gmerk on June 21, 2014, 11:11:39 AM

Quote from: restless on June 21, 2014, 07:58:08 AM

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalksearch.org/topic/sgminer-amd-144-whql-hashrate-improvement-fixed-658975, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

hi @qmerk , @restless

I have 14.4, took 8 files ( amd_opencl32.dll, amd_opencl64.dll, amdocl.dll, amdocl_as32.exe, amdocl_as64.exe, amdocl_ld32.exe, amdocl_ld64.exe, amdocl64.dll) from 14.6 and put into sgminer folder, but no gain compared to lazybear's release in mining x11. tried few of the sgminer versions produced by djm34, including the initial one on the first page of the thread.

Could you please dump your sgminer config or command line parameters, whichever may be relevant.
Or if possible, could you also share the bin files generated by sgminer.

p.s. with lazybear's release & 14.4 driver & opencl files I get around 2180 kh/s mining x11 per each slightly overclocked 6970, have few of these in the rig.

Code:

{
"kernel" : "x11mod",
"intensity" : "21",
"worksize" : "128",
"lookup-gap" : "2"
}

What clocks is your 6970 running at?

950/1375 ~2300kh/s with an older binfile..no increase seen with the new 14.6miner and or cl files

volodzya

newbie

Activity: 10

Merit: 0

Quote from: gmerk on June 21, 2014, 11:11:39 AM

Quote from: restless on June 21, 2014, 07:58:08 AM

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalksearch.org/topic/sgminer-amd-144-whql-hashrate-improvement-fixed-658975, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

hi @qmerk , @restless

I have 14.4, took 8 files ( amd_opencl32.dll, amd_opencl64.dll, amdocl.dll, amdocl_as32.exe, amdocl_as64.exe, amdocl_ld32.exe, amdocl_ld64.exe, amdocl64.dll) from 14.6 and put into sgminer folder, but no gain compared to lazybear's release in mining x11. tried few of the sgminer versions produced by djm34, including the initial one on the first page of the thread.

Could you please dump your sgminer config or command line parameters, whichever may be relevant.
Or if possible, could you also share the bin files generated by sgminer.

p.s. with lazybear's release & 14.4 driver & opencl files I get around 2180 kh/s mining x11 per each slightly overclocked 6970, have few of these in the rig.

Code:

{
"kernel" : "x11mod",
"intensity" : "21",
"worksize" : "128",
"lookup-gap" : "2"
}

oktay50000

sr. member

Activity: 560

Merit: 250

still getting waiting frrom pools Huh

ClutchThese

sr. member

Activity: 448

Merit: 250

can anyone write instructions on how to download the miner? :/

dat mega upload is OP... i can't figure it out.

bullus

sr. member

Activity: 294

Merit: 250

Quote from: barryzand on June 21, 2014, 03:06:43 PM

Quote from: restless on June 21, 2014, 01:43:44 PM

Quote from: BITCOINDENMARK on June 21, 2014, 11:18:05 AM

Quote from: restless on June 21, 2014, 07:58:08 AM

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalksearch.org/topic/sgminer-amd-144-whql-hashrate-improvement-fixed-658975, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same

as in post above

Quote

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).

I will try this in a few hours... thnx for sharing

For me it was C:\AMD\AMD-Catalyst-14.6-Beta-V1.0-Windows-May23\Packages\Drivers\Display\WB6A_INF\B172153 and copied the 8 files, but no increase 6970.
Am I not using the correct beta drivers?

barryzand

hero member

Activity: 574

Merit: 500

Growcoin Chief

Quote from: restless on June 21, 2014, 01:43:44 PM

Quote from: BITCOINDENMARK on June 21, 2014, 11:18:05 AM

Quote from: restless on June 21, 2014, 07:58:08 AM

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalksearch.org/topic/sgminer-amd-144-whql-hashrate-improvement-fixed-658975, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same

as in post above

Quote

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).

I will try this in a few hours... thnx for sharing

binkshurts

member

Activity: 84

Merit: 10

This makes nvidia irrelevant again

Vampiro4L

full member

Activity: 164

Merit: 100

can somebody write up complete instructions how to upgrade bamt 1.6 to this version?

restless

legendary

Activity: 1151

Merit: 1001

Quote from: BITCOINDENMARK on June 21, 2014, 11:18:05 AM

Quote from: restless on June 21, 2014, 07:58:08 AM

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalksearch.org/topic/sgminer-amd-144-whql-hashrate-improvement-fixed-658975, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same

as in post above

Quote

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).

oktay50000

sr. member

Activity: 560

Merit: 250

Quote from: kozmos on June 20, 2014, 03:30:55 AM

@djm34

Thank you a lot for this great sgminer

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ

I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalksearch.org/topic/m.7412560

where can i find linux version of fixed miner?

thcmakaveli

sr. member

Activity: 252

Merit: 250

The link doesnt work for me as well Huh

Topic: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers - page 14. (Read 90635 times)