Topic: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers - page 9. (Read 90635 times)

Here ya go mate...basically a C & P from Lazybear or w/e his name is from x11/x13 mod release (without the hidden 2%):

14.6 amd drivers
I install them but when I run
sgminer it crashes any way to to fix this . do I need other files to make it work
was not crashing befor 

are you speaking about my linkYes I am a bit surprised too by the result...
I will try to recompile and see if I get the same thing, but not for the moment.
Now as I have stated already, it is better to compile yourself than use any binaries
(and actually, that will be the last I put binaries with my release... problem solved.)

Config for x11?

Well i;m posting my problem in case someone read this on a previous threads.

all my cards are hashing at the increased Hashrate, GREAT Job btw, you guys are coming up with great improvement before i can deploys the previous ones  

so here is my problems, i have R9 280X and r9 270x running stable
but my Gigabyte R9 290x starts off at full speed, 5.5 mh/s on x11 but at an indeterminate time it will drop to about half speed, card restart doesn't fix this, i have to reboot.

it does this on sgminer416, and also on the sgminer5 and LSB version also. i read other people having this issue, but can't pinpoint the threads anymore.

anyone .?

thanks

x11 ~ 2.7
x13 ~ 2.0

The sweet part being still using 13.12 drivers with 14.6 opencl dropped in to folder. So didn't have to use "modded" drivers for Win7x64 to get the 5 270x "recognized".

Was getting ~2.0 and ~1.7 respectively before.

Took about 5 mins...didn't change a thing in bat or conf file.

Diamond kernel doesn't work(creates ckolivas binary and throws many HW errors).
Should be great if it gets fixed cos groestlcoin kernel doesn't support DMD stratum.

Any gains for r9 270? What are people hashing?

Anyone tested with linux? what catalyst?

Got 4.85MH/s stable on 290
Win 7 x64, 14.6, 1000/1300 (every higher memclock causes SICK message sooner or later, due to the known 150-1350 variance.. I think)

If this helps anybody:

2x r9 280x Vapor-x gains (using 14.6 fixed version of sgminer).

- Windows 8.1
- updated to 14.4 ATI drivers, did not gain anything.
- uninstalled drivers with DDU (highly recommended you use this to remove ATI drivers)
- Installed 14.6 ATI beta drivers (without HDMI audio drivers)

x11 data:
--- x11: 4,1Mh/s hashrate on both, it was not stable at first using old sgminer settings
   - bumped up just little GPU core, from 1060 to 1075 (at 1100 i got a lot of HW errors)
   - less undervoltage, before i was having 1,09V, now 1,11V
   - stable 48hours without HW errors
gains combined both gpu's:
   - before 6,2Mh/s......now 8,2Mh/s,   33% gain
   - electricity: before 295W..... now 315W,  7% more electric consumption.
BAT FILE BASIC SETTINGS: --thread-concurrency 8192,8191 -g 2,2 -I 18,18 -w 256,256 --auto-fan --gpu-memclock 1488,1488 --gpu-engine 1075,1075 --gpu-powertune -20,-20

x13 data:
--- x13: 3,1Mh/s on both
   - same settings and vboltage as x11
gains combined both gpu's:
   - before 5Mh/s .... now 6,2 Mh/s  20% gain
   -  electricity not measured yet
BAT FILE BASIC SETTINGS: --thread-concurrency 8192,8191 -g 2,2 -I 18,18 -w 128,128 --auto-fan --gpu-memclock 1488,1488 --gpu-engine 1075,1075 --gpu-powertune -20,-20

As you can see, only difference in settings between x11 and x13 is in worksize. Rest is the same. Trying to bumping up intensity, memclock, thread-concurrency and gpu powertune did not gave nothing more.

Hmm
I suspect I may have some ports filtered out.
Does anybody know the X11 pool operating on port 80, 8080 or 443?

Run fine in 13.12 5850hd 
I18 TC6144
If you let the sgminer compile the default kernel (tc6016) gives problems. Edit a config to tc6144

Reinstall the drivers from the windows panel, not the whole process of catalyst

I tried it and got an Error (both x13mod and x13modold):
[08:01:59] Error -11: Building Program (clBuildProgram)
[08:01:59] "C:\Users\leonz\AppData\Local\Temp\OCL352T5.cl", line 1106: error: identifier
          "buf" is undefined
          INPUT_BIG;
          ^

"C:\Users\leonz\AppData\Local\Temp\OCL352T5.cl", line 1112: error: identifier          "buf" is undefined



Tried. No change.


Furthermore.
Today @ morning my antivirus found a trojan in the fixed version. I see people already complained about that. So, I just confirm it.
Switching to NON-fixed version now..

Any suggestion of how to get this stuff to work?

If anyone had issues with "locked clock" speeds, I figured out what was causing mine.  One of my rigs has 4x 290x cards in it.  MSI afterburner recently expired, so I upgraded to the latest beta.  This upgrade didn't keep the "enable unofficial overclocking" setting to whatever you had it before.  I re-enabled it, bam, I can change core/mem clock speeds and not have my cards crash at the defaults.

Thread explaining how to update to 14.6b and compile on BAMT can be found here:  http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/


Achieving 2.7mh/R9270 with this version!  16mh for the rig. Thank you djm34!!

??

what about 5xxx/6xxx cards?

Oh, should have seen the different color in the link.
So I downloaded it, and virustotalled it.
DOESN'T THIS CONCERN ANYONE?

AntiVir    APPL/Bitcoinminer.Gen    20140623
Baidu-International    Hacktool.Win32.BitCoinMiner.BBF    20140623
DrWeb    Tool.BtcMine.141    20140623
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140623
K7AntiVirus    Trojan ( 00494bd01 )    20140623           MAINLY THESE TROJANS, not the bitcoinminer!
K7GW    Trojan ( 00494bd01 )    20140623
Sophos    Generic PUA GF    20140623
Symantec    WS.Reputation.1    20140623
TrendMicro-HouseCall    Suspicious_GEN.F47V0620    20140623

OP's link does work...just not formatted correctly.

https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o