I have very strange problem.
When I start mining with all 4 cards PC just hangs and I have to power it off. (tried with drivers 14.4 WHQL, 14.6beta, 13.12 all hangs)
When Mined with 3 cards : 1) 0,1,2 and
2) 1,2,3 it works ok.
Even When I try with BAMT by following guide
http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/
It hangs with mining with all 4 cards.
Any one please help me out?
PC:
AMD 145 sempron 32 bit
windows 7
4x 280x powercolor OC
Topic: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers - page 6. (Read 90638 times)
June 27, 2014, 09:33:02 AM
June 27, 2014, 09:01:53 AM
New 14.6 drivers cause ~ +10*C (290) temp increase. What's the point? X11 coins were made to work fine under 80*C at 30*C+ ambient in Summer.
Now we draw more electricity, overwhelm cards just like before with Scrypt.
The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)
Now we draw more electricity, overwhelm cards just like before with Scrypt.
The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)
With decent airflow, my 290 rigs didn't go up that much, they're still running ~72C which isn't terrible, but the fan speeds have gone up quite a bit. Still nowhere near how scrypt was cooking them. Get some box fans maybe? haha
June 27, 2014, 04:51:32 AM
it would be great if someone added a pre-compiled version for windows containing the opencl files and bin files for all the latest amd cards
p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.
This version was designed with 14.6 driver in mind. If you are using win 8.1 then you have no excuse to stay with the old amd driversp.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.
the working windows binaries are on the OP.
June 27, 2014, 01:48:37 AM
Anyone with the same problem?
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
x2 same here :-(
Where can I find them? Home page?
June 26, 2014, 11:21:47 PM
it would be great if someone added a pre-compiled version for windows containing the opencl files and bin files for all the latest amd cards
p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.
p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.
try this one ....
https://bitcointalksearch.org/topic/sgminer-amd-144-whql-hashrate-improvement-fixed-658975
June 26, 2014, 09:28:36 PM
it would be great if someone added a pre-compiled version for windows containing the opencl files and bin files for all the latest amd cards
p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.
p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.
June 26, 2014, 09:13:37 PM
Anyone with the same problem?
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
x2 same here :-(
June 26, 2014, 09:10:19 PM
Anyone with the same problem?
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
x2 same here :-(
June 26, 2014, 08:29:45 PM
oh i might have figured it out... .conf file wasn't updated...
edit:
ya that fixed it.. I normally just pass pool info and everything to sgminer via a batch file, but I updated the .conf file with all of that info and that fixed the error.
edit:
ya that fixed it.. I normally just pass pool info and everything to sgminer via a batch file, but I updated the .conf file with all of that info and that fixed the error.
June 26, 2014, 08:20:47 PM
http://i.imgur.com/cXRd2BS.jpg
It just pops up every 5 - 10 seconds in sgminer. I can't tell if it is affecting anything at all. Also when loading up sgminer it says something about failed to resolve pool. As far as I can tell it is connecting though?
It just pops up every 5 - 10 seconds in sgminer. I can't tell if it is affecting anything at all. Also when loading up sgminer it says something about failed to resolve pool. As far as I can tell it is connecting though?
June 26, 2014, 08:13:28 PM
Anyone else getting this error in sgminer?
Getaddrinfo() in setup_Stratum_socket() returned 10109: The specified class was not found
Can you give a little more detail in which occasion you had this error ? Getaddrinfo() in setup_Stratum_socket() returned 10109: The specified class was not found
June 26, 2014, 08:07:59 PM
New 14.6 drivers cause ~ +10*C (290) temp increase. What's the point? X11 coins were made to work fine under 80*C at 30*C+ ambient in Summer.
Now we draw more electricity, overwhelm cards just like before with Scrypt.
The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)
Now we draw more electricity, overwhelm cards just like before with Scrypt.
The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)
Jajaja man. Thanks for the laught.
14.6 drivers increased the hashrate around 30-50%, obviously also increased the power consumption.
June 26, 2014, 02:23:26 PM
Anyone else getting this error in sgminer?
Getaddrinfo() in setup_Stratum_socket() returned 10109: The specified class was not found
Getaddrinfo() in setup_Stratum_socket() returned 10109: The specified class was not found
June 26, 2014, 07:27:09 AM
Djm34 would you have the skill to make a bitblock gpu miner?
June 26, 2014, 07:22:00 AM
Hai guys, is anybody already setup mining vertcoin with this ?
You can try mining on x11.greenpool.com. Mines x11 coins and autoconverts to Vertcoins.
June 26, 2014, 05:52:20 AM
New 14.6 drivers cause ~ +10*C (290) temp increase. What's the point? X11 coins were made to work fine under 80*C at 30*C+ ambient in Summer.
Now we draw more electricity, overwhelm cards just like before with Scrypt.
The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)
Now we draw more electricity, overwhelm cards just like before with Scrypt.
The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)
June 26, 2014, 03:35:48 AM
I've posted a guide on how to update PiMP to use this, thanks so much for the great work guys.
http://www.reddit.com/r/getpimp/comments/294uie/add_amd_146_drivers_and_djm34s_optimized_sgminer/
http://www.reddit.com/r/getpimp/comments/294uie/add_amd_146_drivers_and_djm34s_optimized_sgminer/
June 26, 2014, 03:09:16 AM
Which driver should I use for 5gpu and windows7 64bit to get the boost with 14.6 files/drivers? (7950's)
With 14.4 drivers I can't install the drivers for the fith one, get a explanation icon.
With 14.4 drivers I can't install the drivers for the fith one, get a explanation icon.
June 26, 2014, 02:16:02 AM
Anyone with the same problem?
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...
June 25, 2014, 09:40:25 PM
Tips sent to OP and the_g00se for the bamt install instructions.
If you found this thread helpful tip these guys they were nice enough to share this stuff with the community.
If you found this thread helpful tip these guys they were nice enough to share this stuff with the community.
Jump to: