Topic: [ANN] Signatum - New Algorithm - Fair Launch - No Premine - page 523. (Read 823858 times)
Why does the miner say both amd/nvidia but it's just sgminer? No Nvidia Support ? Seems like it's not an accurate ANN ?
After starting sgminer with the following commands in a .bat, it just times out. Tells me there are no pools found at that address.
Is the pool address different?
Batch file:
sgminer -k skunkhash -o stratum+tcp://sigt.pool.mn:8732 -u myAdress.WorkerName -p x
(of course I put in a correct address)
Output of sgminer:
[01:20:41] Press any key to exit, or sgminer will try again in 15s.
[01:20:56] sigt.pool.mn difficulty changed to 0.004
[01:20:57] No servers were found that could be used to get work from.
[01:20:57] Please check the details from the list below of the servers you have input
[01:20:57] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[01:20:57] Pool: 0 URL: stratum+tcp://sigt.pool.mn:8732 User: BGePWM8CwdnZzs2LXSDBFstBza9vn6RNjn Password: x
[01:20:57] Press any key to exit, or sgminer will try again in 15s.
Any input on that?
Chronn
Is the pool address different?
Batch file:
sgminer -k skunkhash -o stratum+tcp://sigt.pool.mn:8732 -u myAdress.WorkerName -p x
(of course I put in a correct address)
Output of sgminer:
[01:20:41] Press any key to exit, or sgminer will try again in 15s.
[01:20:56] sigt.pool.mn difficulty changed to 0.004
[01:20:57] No servers were found that could be used to get work from.
[01:20:57] Please check the details from the list below of the servers you have input
[01:20:57] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[01:20:57] Pool: 0 URL: stratum+tcp://sigt.pool.mn:8732 User: BGePWM8CwdnZzs2LXSDBFstBza9vn6RNjn Password: x
[01:20:57] Press any key to exit, or sgminer will try again in 15s.
Any input on that?
Chronn
try solo mining for time being
so far i have found 8 blocks
Cheers!
Sources for the GPU miner available as well ? Need to do some testing ...
After starting sgminer with the following commands in a .bat, it just times out. Tells me there are no pools found at that address.
Is the pool address different?
Batch file:
sgminer -k skunkhash -o stratum+tcp://sigt.pool.mn:8732 -u myAdress.WorkerName -p x
(of course I put in a correct address)
Output of sgminer:
[01:20:41] Press any key to exit, or sgminer will try again in 15s.
[01:20:56] sigt.pool.mn difficulty changed to 0.004
[01:20:57] No servers were found that could be used to get work from.
[01:20:57] Please check the details from the list below of the servers you have input
[01:20:57] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[01:20:57] Pool: 0 URL: stratum+tcp://sigt.pool.mn:8732 User: BGePWM8CwdnZzs2LXSDBFstBza9vn6RNjn Password: x
[01:20:57] Press any key to exit, or sgminer will try again in 15s.
Any input on that?
Chronn
Is the pool address different?
Batch file:
sgminer -k skunkhash -o stratum+tcp://sigt.pool.mn:8732 -u myAdress.WorkerName -p x
(of course I put in a correct address)
Output of sgminer:
[01:20:41] Press any key to exit, or sgminer will try again in 15s.
[01:20:56] sigt.pool.mn difficulty changed to 0.004
[01:20:57] No servers were found that could be used to get work from.
[01:20:57] Please check the details from the list below of the servers you have input
[01:20:57] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[01:20:57] Pool: 0 URL: stratum+tcp://sigt.pool.mn:8732 User: BGePWM8CwdnZzs2LXSDBFstBza9vn6RNjn Password: x
[01:20:57] Press any key to exit, or sgminer will try again in 15s.
Any input on that?
Chronn
not working with wallet address, you need to setup worker and password on pool !
Github is down? Can anyone pm rehosted windows wallet and miner?
Github IS down, once up you can expect our CPU miner to be there. Edit: https://github.com/signatumd/releases/blob/master/sigt-cpu-miner.zip
cant find any shares at pool.. only getting hardware errors
After starting sgminer with the following commands in a .bat, it just times out. Tells me there are no pools found at that address.
Is the pool address different?
Batch file:
sgminer -k skunkhash -o stratum+tcp://sigt.pool.mn:8732 -u myAdress.WorkerName -p x
(of course I put in a correct address)
Output of sgminer:
[01:20:41] Press any key to exit, or sgminer will try again in 15s.
[01:20:56] sigt.pool.mn difficulty changed to 0.004
[01:20:57] No servers were found that could be used to get work from.
[01:20:57] Please check the details from the list below of the servers you have input
[01:20:57] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[01:20:57] Pool: 0 URL: stratum+tcp://sigt.pool.mn:8732 User: BGePWM8CwdnZzs2LXSDBFstBza9vn6RNjn Password: x
[01:20:57] Press any key to exit, or sgminer will try again in 15s.
Any input on that?
Chronn
Is the pool address different?
Batch file:
sgminer -k skunkhash -o stratum+tcp://sigt.pool.mn:8732 -u myAdress.WorkerName -p x
(of course I put in a correct address)
Output of sgminer:
[01:20:41] Press any key to exit, or sgminer will try again in 15s.
[01:20:56] sigt.pool.mn difficulty changed to 0.004
[01:20:57] No servers were found that could be used to get work from.
[01:20:57] Please check the details from the list below of the servers you have input
[01:20:57] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[01:20:57] Pool: 0 URL: stratum+tcp://sigt.pool.mn:8732 User: BGePWM8CwdnZzs2LXSDBFstBza9vn6RNjn Password: x
[01:20:57] Press any key to exit, or sgminer will try again in 15s.
Any input on that?
Chronn
Github is down? Can anyone pm rehosted windows wallet and miner?
edit: nvm back up
edit: nvm back up
Soon btc1,btc2 maybe,only cpu gpu minning.
It doesn't work
works fine, got blocks
Yes... now
It doesn't work
works fine, got blocks
i am getting 25 MH/s with GTX 1080 TI
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
now the miner is stable at Intensity 23
What GPU?
Nvidia GTX 1080 ti, now using Xintensity 4000 and getting 28 MH/s
i am getting 25 MH/s with GTX 1080 TI
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
now the miner is stable at Intensity 23
Using Sapphire R9 270x and I'm at 25 and appears stable 2.48M .. have yet to find a block
i am getting 25 MH/s with GTX 1080 TI
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
now the miner is stable at Intensity 23
What GPU?
It doesn't work
i am getting 25 MH/s with GTX 1080 TI
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
now the miner is stable at Intensity 23
Anyone selling this coin ?
makefile.unix:184: recipe for target 'obj/init.o' failed
i am getting 25 MH/s with GTX 1080 TI
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
settings
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -k skunkhash -o http://127.0.0.1:3333 -u xyz -p pass -I 20 --gpu-platform 1
GPU fails at Intensity 22
Jump to: