Your sites down.
Edit: Its back again now. Front end and mining was down for about 5 minutes.
Topic: [ANN] SoloMining.com - 0.5% fee, Charts, Stats, NOMP, Alts. - page 5. (Read 17447 times)
Tonight we had the good fortune of having a super user and 150 TH, unfortunately no luck in finding a block, you soon friend.
Nevermind, I see it's adusting
If although very high sends an average of 20 or 25 shares each minute would be within the ideal, recommended by the same ck, has gone to the higher diff accepted on that port.
There are 3 factors to modify, TargetTime, RetargetTime and PercentJump.
Now is 15, 60, 50. Jumps 50% are large, were above 30% and taking too long to adjust, let's see how we can tune it to the fullest.
Diff is still too high... sometimes it goes down to 1.8 then shoot up to 13.8k. It's not stable.
Edit: On ckpool, the diff for 2Th is usually hovering around 1.3-1.6. Max it goes up to is 1.8+
Nevermind, I see it's adusting
If although very high sends an average of 20 or 25 shares each minute would be within the ideal, recommended by the same ck, has gone to the higher diff accepted on that port.
There are 3 factors to modify, TargetTime, RetargetTime and PercentJump.
Now is 15, 60, 50. Jumps 50% are large, were above 30% and taking too long to adjust, let's see how we can tune it to the fullest.
Nevermind, I see it's adusting
ckpool starts at 1024. It will adjust up or down.
Changed, try now, the jumps are 50% this is also modifiable.
Much better
Let's see if we can find your first block. ckpool starts at 1024. It will adjust up or down.
Changed, try now, the jumps are 50% this is also modifiable.
Just thought you should know, you should at least start the vardiff at 1024 then adjust down or up. Or even start at 512. I just tried your vardiff port and it started at 1 diff and connection dead within a few seconds.
Thanks for the warning, the problem that I have is for people of few MH that if they start to 1024 do not send any valid share and never will adjust its difficulty to 1, the easy solution is to have multiple ports all varDiff, one begins 1, one in 512 and one in 1024 but I'm trying to leave a single port.
As does the varDiff port ck pool, those which ye have tested?
ckpool starts at 1024. It will adjust up or down.
Just thought you should know, you should at least start the vardiff at 1024 then adjust down or up. Or even start at 512. I just tried your vardiff port and it started at 1 diff and connection dead within a few seconds.
Thanks for the warning, the problem that I have is for people of few MH that if they start to 1024 do not send any valid share and never will adjust its difficulty to 1, the easy solution is to have multiple ports all varDiff, one begins 1, one in 512 and one in 1024 but I'm trying to leave a single port.
As does the varDiff port ck pool, those which ye have tested?
New Port varDiff of 1-16384 on port 3334, we will prove that this is going and how we can adjust the maximum configuration to finish leaving one input port, the miners sometimes not select the most suitable difficulties and consume involuntarily entire bandwidth of the pool.
This configured with a TargetTime 16s RetargetTime 60s, each jump is 50%, these values can fine tune to find suitable.
Whoever wants to collaborate to try it, thanks.
This configured with a TargetTime 16s RetargetTime 60s, each jump is 50%, these values can fine tune to find suitable.
Whoever wants to collaborate to try it, thanks.
Just thought you should know, you should at least start the vardiff at 1024 then adjust down or up. Or even start at 512. I just tried your vardiff port and it started at 1 diff and connection dead within a few seconds.
Forgot to say I found the first litecoin block and several after 
. It was with rented rigs though as I don't own any scrypt hardware.
Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs
.
Do you mind me asking where you rent the scrypt mining rigs and if you make profit off of it?. It was with rented rigs though as I don't own any scrypt hardware. Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs
.
.
Forgot to say I found the first litecoin block and several after . It was with rented rigs though as I don't own any scrypt hardware.
Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs.
Do you mind me asking where you rent the scrypt mining rigs and if you make profit off of it?. It was with rented rigs though as I don't own any scrypt hardware. Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs
..Forgot to say I found the first litecoin block and several after . It was with rented rigs though as I don't own any scrypt hardware.
Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs.
Do you mind me asking where you rent the scrypt mining rigs and if you make profit off of it?. It was with rented rigs though as I don't own any scrypt hardware. Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs
.. Forgot to say I found the first litecoin block and several after . It was with rented rigs though as I don't own any scrypt hardware.
Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs.
Do you mind me asking where you rent the scrypt mining rigs and if you make profit off of it? . It was with rented rigs though as I don't own any scrypt hardware. Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs
.
Forgot to say I found the first litecoin block and several after . It was with rented rigs though as I don't own any scrypt hardware.
Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs.
. It was with rented rigs though as I don't own any scrypt hardware. Unfortunately I don't have the spare btc or money to rent sha256 rigs to combat my demon of the 0 bitcoin blocks found by renting rigs
.
Yes very transparent 
.
The 0 blocks found for bitcoin is driving me mad (must be my ocd lol) but I only have 850GH to point there, pool needs some extra hashrate to find the first one so I can sleep at night
.
aTg is a good guy I'd love to help his pool find its first block.
.The 0 blocks found for bitcoin is driving me mad (must be my ocd lol) but I only have 850GH to point there, pool needs some extra hashrate to find the first one so I can sleep at night
.aTg is a good guy I'd love to help his pool find its first block.
I installed a new server with more capacity and much more stability:
As you can see, the server hosting at SoloMining.com is a transparent operation. Teehee
Looks like a cool site.
Someone needs to find a bitcoin block on this pool, calling out to anyone with spare hashrate to give it a go 
.
.
New Port varDiff of 1-16384 on port 3334, we will prove that this is going and how we can adjust the maximum configuration to finish leaving one input port, the miners sometimes not select the most suitable difficulties and consume involuntarily entire bandwidth of the pool.
This configured with a TargetTime 16s RetargetTime 60s, each jump is 50%, these values can fine tune to find suitable.
Whoever wants to collaborate to try it, thanks.
This configured with a TargetTime 16s RetargetTime 60s, each jump is 50%, these values can fine tune to find suitable.
Whoever wants to collaborate to try it, thanks.
I must say I like the pool and hope others join in, there is nothing like finding a block to get the adrenaline flowing....cheers
Jump to: