[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 21.

badman74

hero member

Activity: 658

Merit: 500

Quote from: erikforfreedom on April 30, 2014, 11:03:05 AM

Can somebody help me set up sph-sgminer for ubuntu.
I have downloaded it, now how do i compile?
Can somebody provide me with some directions?
Thanks
-erik

Did you try the method mentioned at the top of this page?

erikforfreedom

newbie

Activity: 18

Merit: 0

Can somebody help me set up sph-sgminer for ubuntu.
I have downloaded it, now how do i compile?
Can somebody provide me with some directions?
Thanks
-erik

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: B.T.Coin on April 30, 2014, 09:07:50 AM

Ever since I switched to X11 and I'm using the modified SGminer, I'm having a lot of problems connecting to pools.
SGminer start and then reports "Waiting for work to be available from pools". Then it closes and CGwatcher restarts it.
This goes on until eventually it will connect to a pool.

I think this is a bug that has been ported into SGminer from from CGminer

reported here:https://bitcointalk.org/index.php?to...355#msg3464355

and acknowledged as a bug here : https://bitcointalk.org/index.php?to...923#msg3473923

Does anybody else have this same problem?

I'm using the windows binaries compiled by badman74 and have tried both the first (DRK only) and the last version (lots of coins) but I keep having the same problem.

0.1 BTC bounty for the person that can solve this for me.

I have the same problem occasionally.

I solo mine. The miner can work on long time, then it will report "waiting for work from pools". After about 30 min, it will find work and mine again. This happen several time a day.

I do not have this problem when mining in a pool.

B.T.Coin

sr. member

Activity: 332

Merit: 250

Ever since I switched to X11 and I'm using the modified SGminer, I'm having a lot of problems connecting to pools.
SGminer start and then reports "Waiting for work to be available from pools". Then it closes and CGwatcher restarts it.
This goes on until eventually it will connect to a pool.

I think this is a bug that has been ported into SGminer from from CGminer

reported here: https://bitcointalksearch.org/topic/m.3464355

and acknowledged as a bug here : https://bitcointalksearch.org/topic/m.3473923

Does anybody else have this same problem?

I'm using the windows binaries compiled by badman74 and have tried both the first (DRK only) and the last version (lots of coins) but I keep having the same problem.

0.1 BTC bounty for the person that can solve this for me.

Amph

legendary

Activity: 3248

Merit: 1070

the miner stop working if there isn't a bat file for every desktop shortcut

so if you create just the desktop shortcut without the bat file in the sgminer folder, you get "Application has stopped working" error

in the previous version there wasn't this problem...a bit lame if you ask me

badman74

hero member

Activity: 658

Merit: 500

Quote from: SamboNZ on April 29, 2014, 07:03:54 AM

Hi guys,

I'm an experienced Scrypt Miner, but am new to X11, and I just wanted some feedback on whether my stats are looking healthy. I am currently running 2x 280x GPUs. Here's my SGMiner stats after ~30min:

Code:

sgminer 4.1.0-103-g00015 - Started: [2014-04-29 23:19:21]
-------------------------------------------------------------------------------
(5s):4.399M (avg):4.401Mh/s | A:2 R:0 HW:0 WU:0.061/m
ST: 2 SS: 0 NB: 15 LW: 4598 GF: 0 RF: 0
Connected to Pool 0 (stratum) diff 0.018 as user xxxxxxx
Block: 120d76be... Diff:1.01K Started: [23:46:15] Best share: 3.905
-------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 47.0C 2088RPM | 2.206M/2.207Mh/s | R: 0.0% HW:0 WU:0.031/m I:13
GPU 1: 46.0C 2009RPM | 2.193M/2.194Mh/s | R: 0.0% HW:0 WU:0.030/m I:13
-------------------------------------------------------------------------------
[23:46:15] Accepted 17a66cdd Diff 0.042/0.018 GPU 1 at Pool 0
[23:46:15] Network diff set to 1.01K
[23:46:15] New block detected on network before pool notification
[23:46:18] Pool 1 difficulty changed to 0.004
[23:46:22] Accepted 14c5af4d Diff 0.048/0.018 GPU 0 at Pool 0
[23:46:39] Accepted 23b8cdb8 Diff 0.028/0.018 GPU 1 at Pool 0
[23:46:48] Accepted 203c3159 Diff 0.031/0.018 GPU 0 at Pool 0
[23:46:49] Pool 1 difficulty changed to 0.004
[23:47:20] Accepted 219b369b Diff 0.030/0.018 GPU 1 at Pool 0
[23:47:50] Pool 1 difficulty changed to 0.004
[23:48:02] Accepted 2e410f5e Diff 0.022/0.018 GPU 0 at Pool 0
[23:48:20] Pool 1 difficulty changed to 0.004
[23:48:51] Pool 1 difficulty changed to 0.004

Points of concern for me are the small number of accepts, and apparently tiny work units per minute.

Also of concern is the 'Discarded' stat in CGWatcher which as at the time of this screenshot was showing 1000. Interestingly CGWatcher shows 190 accepts.

Finally, I'm mining using the CoinMine.pw pool, and while the pool site is showing me good hash rate, I can't see any coins earned after an hour.

That looks correct to me
The reason for the small number of accepts is because x11 works on very small units if you look you will see you are doing .061 WU/m which is about .6 accepted every 10 min
I suppose some decimal points on accepted and rejected should be added

edit: also you will not show any coins earned untill the pool finds a block, so if there if the pool has a small hash rate it may take a while

SamboNZ

sr. member

Activity: 1064

Merit: 253

Hi guys,

I'm an experienced Scrypt Miner, but am new to X11, and I just wanted some feedback on whether my stats are looking healthy. I am currently running 2x 280x GPUs. Here's my SGMiner stats after ~30min:

Code:

sgminer 4.1.0-103-g00015 - Started: [2014-04-29 23:19:21]
-------------------------------------------------------------------------------
(5s):4.399M (avg):4.401Mh/s | A:2 R:0 HW:0 WU:0.061/m
ST: 2 SS: 0 NB: 15 LW: 4598 GF: 0 RF: 0
Connected to Pool 0 (stratum) diff 0.018 as user xxxxxxx
Block: 120d76be... Diff:1.01K Started: [23:46:15] Best share: 3.905
-------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 47.0C 2088RPM | 2.206M/2.207Mh/s | R: 0.0% HW:0 WU:0.031/m I:13
GPU 1: 46.0C 2009RPM | 2.193M/2.194Mh/s | R: 0.0% HW:0 WU:0.030/m I:13
-------------------------------------------------------------------------------
[23:46:15] Accepted 17a66cdd Diff 0.042/0.018 GPU 1 at Pool 0
[23:46:15] Network diff set to 1.01K
[23:46:15] New block detected on network before pool notification
[23:46:18] Pool 1 difficulty changed to 0.004
[23:46:22] Accepted 14c5af4d Diff 0.048/0.018 GPU 0 at Pool 0
[23:46:39] Accepted 23b8cdb8 Diff 0.028/0.018 GPU 1 at Pool 0
[23:46:48] Accepted 203c3159 Diff 0.031/0.018 GPU 0 at Pool 0
[23:46:49] Pool 1 difficulty changed to 0.004
[23:47:20] Accepted 219b369b Diff 0.030/0.018 GPU 1 at Pool 0
[23:47:50] Pool 1 difficulty changed to 0.004
[23:48:02] Accepted 2e410f5e Diff 0.022/0.018 GPU 0 at Pool 0
[23:48:20] Pool 1 difficulty changed to 0.004
[23:48:51] Pool 1 difficulty changed to 0.004

Points of concern for me are the small number of accepts, and apparently tiny work units per minute.

Also of concern is the 'Discarded' stat in CGWatcher which as at the time of this screenshot was showing 1000. Interestingly CGWatcher shows 190 accepts.

Finally, I'm mining using the CoinMine.pw pool, and while the pool site is showing me good hash rate, I can't see any coins earned after an hour.

m5city

newbie

Activity: 30

Merit: 0

hi, i have a problem with my hashrate for darkcoin , i use this setting get a stable hashrate around 0.10M, but i only have 1.4 darkcoin in past 20 hours, is this correct? i hope to get around 3.2 or something like that!

also , the offical DARKCOIN pool show a 5000-8000 KH/S, is this normal? please help me!!

here is my setting

export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1

d:\SGMiner\SGMiner.exe -k darkcoin -o stratum+tcp://drkpool.com:3333 -u georgezhou.1 -p 1 -I 18 -g 4 --worksize 128 --thread-concurrency 27400 --gpu-powertune 20 --gpu-engine 1000 --gpu-memclock 1450 --lookup-gap 2 --gpu-platform 0 --gpu-fan 70

http://s16.postimg.org/6n84ngn9t/QQ_20140429105623.jpg

bangomatic

legendary

Activity: 1246

Merit: 1000

ARK Team likes to ban and delete posts in reddit.

Quote from: badman74 on April 27, 2014, 08:47:52 PM

Quote from: bangomatic on April 27, 2014, 07:54:41 PM

Can someone post a step by step beginners guide to getting this installed and working on Ubuntu 12.04 with r290's? I'm currently mining the BC pool but want to switch over to Darkcoin

hmm dont know anything about ubuntu
this should work for linux, maybe you can figure out any changes necessary

git clone git://github.com/prettyhatemachine/sph-sgminer.git
cd sph-sgminer
copy ADL files to ADL_SDK (look in this folder for where to get them)
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl
make
then to run it
./sgminer -k darkcoin -o : -u -p -I 18

Thanks! I will give it a try.

Gargo

sr. member

Activity: 585

Merit: 251

is it possible to build it for mac os?

badman74

hero member

Activity: 658

Merit: 500

Quote from: bangomatic on April 27, 2014, 07:54:41 PM

Can someone post a step by step beginners guide to getting this installed and working on Ubuntu 12.04 with r290's? I'm currently mining the BC pool but want to switch over to Darkcoin

hmm dont know anything about ubuntu
this should work for linux, maybe you can figure out any changes necessary

git clone git://github.com/prettyhatemachine/sph-sgminer.git
cd sph-sgminer
copy ADL files to ADL_SDK (look in this folder for where to get them)
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl
make
then to run it
./sgminer -k darkcoin -o : -u -p -I 18

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

Quote from: badman74 on April 27, 2014, 07:20:21 PM

Quote from: Hueristic on April 27, 2014, 06:37:29 PM

Quote from: badman74 on April 27, 2014, 04:07:12 PM

Quote from: Hueristic on April 27, 2014, 03:14:59 PM

Quote from: badman74 on April 27, 2014, 02:36:08 PM

Quote from: Hueristic on April 27, 2014, 02:21:06 PM

Quote from: badman74 on April 27, 2014, 11:08:03 AM

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

No why would the dif matter? There are zero accepts/rejects but it hashes.

4.1.0 works so I am good with that.

Also I am having an issue on 4.10 on my other system where the miner drops to a command prompt with no error. Any thoughts?

it sounds like you are trying for too high a diff on that pool so you would need --difficulty-multiplier 0.0039062500
provided you are actually using one of the miners from the OP

Quote

Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.

I'll try it with the dif but I see no reason why that would effect the pool from not accepting OR rejecting any shares.

AFA the 4.1.0 version that works fine on my main system Do you have any clue why it just drops out of the program to a cmd prompt after trying to initialize the gpus's? There is no error whatsoever. Very irritating a program that exits without a code.

no idea since i dont know what version you are actually using, nor do i know what your gpu's are.
also will need to know the settings you are using as well...
btw there is no 4.2.0 version

edit: confirmed groestlcoin algo needs --difficulty-multiplier 0.0039062500 or it just sets there hashing as the diff is way too high to get a share otherwise
also PHM's latest build is 4.1.0-103-g00015
try
sgminer -I 18 -k groestlcoin -o "stratum+tcp://erebor.dwarfpool.com:3345" -u COIN_WALLET -p 1 --difficulty-multiplier 0.0039062500

States 4.2.0 version in one of the readme files. thx for the confirmation. AFA the 4.1.0 version bug I outlined it in post above.

so... have you tested it with the command line i gave?
it works on my computer just fine as long as the difficulty-multiplier option is set

Sorry, after finally finding (re-finding:can't believe I forgot this!) the Bug and getting the 4.1.0 version hashing I don't have the drive to change miners again and check. I'm going to mine a few days before messing with it again.

Edit: OK, I have tested with 4.1.0-103-g00015 and shares are now being accepted. Thx alot. I'm getting the exact same hash as on 4.1.0, Isn't this version supposed to increase hash?

Also I found It was an eye failure with the 4.2.0 misread. I skimmed the file and missed the "TBA" and assumed (I KNOW

) It was just a version header.

OK, I can confirm that setting the verbose flag is fixed in 4.1.0-103-g00015

bangomatic

legendary

Activity: 1246

Merit: 1000

ARK Team likes to ban and delete posts in reddit.

Can someone post a step by step beginners guide to getting this installed and working on Ubuntu 12.04 with r290's? I'm currently mining the BC pool but want to switch over to Darkcoin

badman74

hero member

Activity: 658

Merit: 500

Quote from: Hueristic on April 27, 2014, 06:37:29 PM

Quote from: badman74 on April 27, 2014, 04:07:12 PM

Quote from: Hueristic on April 27, 2014, 03:14:59 PM

Quote from: badman74 on April 27, 2014, 02:36:08 PM

Quote from: Hueristic on April 27, 2014, 02:21:06 PM

Quote from: badman74 on April 27, 2014, 11:08:03 AM

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

No why would the dif matter? There are zero accepts/rejects but it hashes.

4.1.0 works so I am good with that.

Also I am having an issue on 4.10 on my other system where the miner drops to a command prompt with no error. Any thoughts?

it sounds like you are trying for too high a diff on that pool so you would need --difficulty-multiplier 0.0039062500
provided you are actually using one of the miners from the OP

Quote

Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.

I'll try it with the dif but I see no reason why that would effect the pool from not accepting OR rejecting any shares.

AFA the 4.1.0 version that works fine on my main system Do you have any clue why it just drops out of the program to a cmd prompt after trying to initialize the gpus's? There is no error whatsoever. Very irritating a program that exits without a code.

no idea since i dont know what version you are actually using, nor do i know what your gpu's are.
also will need to know the settings you are using as well...
btw there is no 4.2.0 version

edit: confirmed groestlcoin algo needs --difficulty-multiplier 0.0039062500 or it just sets there hashing as the diff is way too high to get a share otherwise
also PHM's latest build is 4.1.0-103-g00015
try
sgminer -I 18 -k groestlcoin -o "stratum+tcp://erebor.dwarfpool.com:3345" -u COIN_WALLET -p 1 --difficulty-multiplier 0.0039062500

States 4.2.0 version in one of the readme files. thx for the confirmation. AFA the 4.1.0 version bug I outlined it in post above.

so... have you tested it with the command line i gave?
it works on my computer just fine as long as the difficulty-multiplier option is set

badman74

hero member

Activity: 658

Merit: 500

Quote from: jimlite on April 27, 2014, 06:12:47 PM

File name:    sgminer[DRK_Q2C_QRK_MYR_FC_INK_ANI_GRS_SIC_TWE_MARU].rar
Detection ratio:    7 / 50
Analysis date:    2014-04-27 23:09:29 UTC ( 0 minutes ago )
0
0

Analysis
Additional information
Comments
Votes

Antivirus    Result    Update
Agnitum    Riskware.Agent!    20140427
AntiVir    APPL/Bitcoinminer.Gen    20140427
Baidu-International    Hacktool.Win32.BitCoinMiner.BF    20140427
DrWeb    Tool.BtcMine.141    20140427
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140427
Symantec    WS.Reputation.1    20140427
TrendMicro-HouseCall    TROJ_GEN.F47V0416    20140427

Virustotal for latest build. 7 positives. Can anyone confirm this is free of trojans, virus, rootkits, etc.?

it just says its a bitcoin miner
a lot of antivirus classify miners as viruses due to some people putting bitcoin miners inside viruses

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

Quote from: badman74 on April 27, 2014, 04:07:12 PM

Quote from: Hueristic on April 27, 2014, 03:14:59 PM

Quote from: badman74 on April 27, 2014, 02:36:08 PM

Quote from: Hueristic on April 27, 2014, 02:21:06 PM

Quote from: badman74 on April 27, 2014, 11:08:03 AM

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

No why would the dif matter? There are zero accepts/rejects but it hashes.

4.1.0 works so I am good with that.

Also I am having an issue on 4.10 on my other system where the miner drops to a command prompt with no error. Any thoughts?

it sounds like you are trying for too high a diff on that pool so you would need --difficulty-multiplier 0.0039062500
provided you are actually using one of the miners from the OP

Quote

Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.

I'll try it with the dif but I see no reason why that would effect the pool from not accepting OR rejecting any shares.

AFA the 4.1.0 version that works fine on my main system Do you have any clue why it just drops out of the program to a cmd prompt after trying to initialize the gpus's? There is no error whatsoever. Very irritating a program that exits without a code.

no idea since i dont know what version you are actually using, nor do i know what your gpu's are.
also will need to know the settings you are using as well...
btw there is no 4.2.0 version

edit: confirmed groestlcoin algo needs --difficulty-multiplier 0.0039062500 or it just sets there hashing as the diff is way too high to get a share otherwise
also PHM's latest build is 4.1.0-103-g00015
try
sgminer -I 18 -k groestlcoin -o "stratum+tcp://erebor.dwarfpool.com:3345" -u COIN_WALLET -p 1 --difficulty-multiplier 0.0039062500

States 4.2.0 version in one of the readme files. thx for the confirmation. AFA the 4.1.0 version bug I outlined it in post above.

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

Found the issue. I even found it a year ago and forgot it. I notified the Dev. Back then and he assured me it would be fixed.

You cannot use the "Verbose" flag either in the config file or the command line.

This should be in the documentation but it isn't.

jimlite

legendary

Activity: 1848

Merit: 1018

File name:    sgminer[DRK_Q2C_QRK_MYR_FC_INK_ANI_GRS_SIC_TWE_MARU].rar
Detection ratio:    7 / 50
Analysis date:    2014-04-27 23:09:29 UTC ( 0 minutes ago )
0
0

Analysis
Additional information
Comments
Votes

Antivirus    Result    Update
Agnitum    Riskware.Agent!    20140427
AntiVir    APPL/Bitcoinminer.Gen    20140427
Baidu-International    Hacktool.Win32.BitCoinMiner.BF    20140427
DrWeb    Tool.BtcMine.141    20140427
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140427
Symantec    WS.Reputation.1    20140427
TrendMicro-HouseCall    TROJ_GEN.F47V0416    20140427

Virustotal for latest build. 7 positives. Can anyone confirm this is free of trojans, virus, rootkits, etc.?

badman74

hero member

Activity: 658

Merit: 500

Quote from: Hueristic on April 27, 2014, 03:14:59 PM

Quote from: badman74 on April 27, 2014, 02:36:08 PM

Quote from: Hueristic on April 27, 2014, 02:21:06 PM

Quote from: badman74 on April 27, 2014, 11:08:03 AM

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

No why would the dif matter? There are zero accepts/rejects but it hashes.

4.1.0 works so I am good with that.

Also I am having an issue on 4.10 on my other system where the miner drops to a command prompt with no error. Any thoughts?

it sounds like you are trying for too high a diff on that pool so you would need --difficulty-multiplier 0.0039062500
provided you are actually using one of the miners from the OP

Quote

Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.

I'll try it with the dif but I see no reason why that would effect the pool from not accepting OR rejecting any shares.

AFA the 4.1.0 version that works fine on my main system Do you have any clue why it just drops out of the program to a cmd prompt after trying to initialize the gpus's? There is no error whatsoever. Very irritating a program that exits without a code.

no idea since i dont know what version you are actually using, nor do i know what your gpu's are.
also will need to know the settings you are using as well...
btw there is no 4.2.0 version

edit: confirmed groestlcoin algo needs --difficulty-multiplier 0.0039062500 or it just sets there hashing as the diff is way too high to get a share otherwise
also PHM's latest build is 4.1.0-103-g00015
try
sgminer -I 18 -k groestlcoin -o "stratum+tcp://erebor.dwarfpool.com:3345" -u COIN_WALLET -p 1 --difficulty-multiplier 0.0039062500

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

Quote from: badman74 on April 27, 2014, 02:36:08 PM

Quote from: Hueristic on April 27, 2014, 02:21:06 PM

Quote from: badman74 on April 27, 2014, 11:08:03 AM

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

No why would the dif matter? There are zero accepts/rejects but it hashes.

4.1.0 works so I am good with that.

Also I am having an issue on 4.10 on my other system where the miner drops to a command prompt with no error. Any thoughts?

it sounds like you are trying for too high a diff on that pool so you would need --difficulty-multiplier 0.0039062500
provided you are actually using one of the miners from the OP

Quote

Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.

I'll try it with the dif but I see no reason why that would effect the pool from not accepting OR rejecting any shares.

AFA the 4.1.0 version that works fine on my main system Do you have any clue why it just drops out of the program to a cmd prompt after trying to initialize the gpus's? There is no error whatsoever. Very irritating a program that exits without a code.

Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 21. (Read 515718 times)