[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 22.

badman74

hero member

Activity: 658

Merit: 500

Quote from: Hueristic on April 27, 2014, 02:21:06 PM

Quote from: badman74 on April 27, 2014, 11:08:03 AM

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

No why would the dif matter? There are zero accepts/rejects but it hashes.

4.1.0 works so I am good with that.

Also I am having an issue on 4.10 on my other system where the miner drops to a command prompt with no error. Any thoughts?

it sounds like you are trying for too high a diff on that pool so you would need --difficulty-multiplier 0.0039062500
provided you are actually using one of the miners from the OP

Quote

Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

Quote from: badman74 on April 27, 2014, 11:08:03 AM

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

No why would the dif matter? There are zero accepts/rejects but it hashes.

4.1.0 works so I am good with that.

Also I am having an issue on 4.10 on my other system where the miner drops to a command prompt with no error. Any thoughts?

PepiX

newbie

Activity: 39

Merit: 0

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

4.2.0? The newest I saw in this topic was 4.1.0.103

badman74

hero member

Activity: 658

Merit: 500

Quote from: Hueristic on April 27, 2014, 10:54:10 AM

4.2.0 does not work with Groestlcoin on Drawfpool.

have you tried --difficulty-multiplier 0.0039062500
or --difficulty-multiplier 256

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

4.2.0 does not work with Groestlcoin on Drawfpool.

badman74

hero member

Activity: 658

Merit: 500

Quote from: SimkoMiner on April 27, 2014, 02:03:51 AM

Guys, could you please somebody tell me what is good hashrate for DARKCOIN via SGMiner on Radeon R7 260x? I'm currently getting 360Kh/s. Can you please post some config for this gpu? Thanks.

that sounds low...
cant say as i havent seen anyone post any info on the 260
it seems like you should get about 3 to 4 times the hash rate compared to scrypt
as far as configs

setx GPU_MAX_ALLOC_PERCENT 100
sgminer -k darkcoin -o stratum+tcp://drk.cpu-pool.net:3500 -u badman74.1 -p x -I 20 --gpu-engine 1000 --gpu-memclock 1500

is what i use for my r9 290

gotqn

newbie

Activity: 44

Merit: 0

Quote from: SimkoMiner on April 27, 2014, 02:03:51 AM

Guys, could you please somebody tell me what is good hashrate for DARKCOIN via SGMiner on Radeon R7 260x? I'm currently getting 360Kh/s. Can you please post some config for this gpu? Thanks.

Make sure you are using the sph-sgminer, not the oficial sgminer as the later one is not supporting X11 algorithm

SimkoMiner

hero member

Activity: 925

Merit: 1000

Guys, could you please somebody tell me what is good hashrate for DARKCOIN via SGMiner on Radeon R7 260x? I'm currently getting 360Kh/s. Can you please post some config for this gpu? Thanks.

badman74

hero member

Activity: 658

Merit: 500

Quote from: Hippie Tech on April 26, 2014, 11:17:48 PM

Quote from: badman74 on April 26, 2014, 09:06:26 PM

Quote from: Hippie Tech on April 26, 2014, 08:21:04 PM

Hio badman74 Grin

Plz post some addys so that we can shower you with MARU and HIRO coins. Tongue

lol if you insist
Hiro: HCpDY9JtsAKMFnLFev6XYDUh85uX64vYKU
Maru: SnZ1CJWohU6Ztb26oKHYXMf4HcTj23LqhE

"shakes fist"

Cheesy

One block of each.. SENT !

much appreciated Grin

Spoetnik

legendary

Activity: 1540

Merit: 1011

FUD Philanthropist™

I'd send some but my ass is poor i'm prob one of only a few guys in this forum that have 1 gpu to mine with Sad

and i just had a 2nd pc explode today with a light show and a flash/fire smoke and loud banging explosions LOL

it was running a Nvidia 550Ti doing scrypt with the C2D cpu mining a bit too.. do we even call that mining its so slow ? hahha
I blame Yellow coin.. it made ma puter blowz up Sad

Hippie Tech

legendary

Activity: 1624

Merit: 1001

All cryptos are FIAT digital currency. Do not use.

Quote from: badman74 on April 26, 2014, 09:06:26 PM

Quote from: Hippie Tech on April 26, 2014, 08:21:04 PM

Hio badman74 Grin

Plz post some addys so that we can shower you with MARU and HIRO coins. Tongue

lol if you insist
Hiro: HCpDY9JtsAKMFnLFev6XYDUh85uX64vYKU
Maru: SnZ1CJWohU6Ztb26oKHYXMf4HcTj23LqhE

"shakes fist"

Cheesy

One block of each.. SENT !

badman74

hero member

Activity: 658

Merit: 500

Quote from: Hippie Tech on April 26, 2014, 08:21:04 PM

Hio badman74 Grin

Plz post some addys so that we can shower you with MARU and HIRO coins. Tongue

lol if you insist
Hiro: HCpDY9JtsAKMFnLFev6XYDUh85uX64vYKU
Maru: SnZ1CJWohU6Ztb26oKHYXMf4HcTj23LqhE

Hippie Tech

legendary

Activity: 1624

Merit: 1001

All cryptos are FIAT digital currency. Do not use.

Hio badman74 Grin

Plz post some addys so that we can shower you with MARU and HIRO coins. Tongue

badman74

hero member

Activity: 658

Merit: 500

Quote from: PVTD on April 26, 2014, 03:40:01 PM

Howdy!
Whatever I do as setting to start up the mining, I get multiple errors, but then again, I am pretty new in this world.
I have had every problem in this thread, and I can't figure out what to do Tongue

My info is:
Ati HD 7650M
i7 Ivy
Ati drivers 13.12 x64

Iv tried a lot of different BAT files, almost all those I could find here, but get errors like: Command options, not selected GPU, shares difficulty, unable to connect and more.
This is the latest string I have " sgminer.exe -a quark -o stratum+tcp://qrk.suprnova.cc:6666 -u PVTD.mypc -p pass " and thats very basic

(Fails to read config)
Any help would be awesome!
PV

if you are using one of the builds off the OP use -k quarkcoin instead of -a quark
then if it still gives low shares add --difficulty-multiplier 256
so it will be
sgminer.exe -k quarkcoin -o stratum+tcp://qrk.suprnova.cc:6666 -u PVTD.mypc -p pass
or
sgminer.exe -k quarkcoin -o stratum+tcp://qrk.suprnova.cc:6666 -u PVTD.mypc -p pass --difficulty-multiplier 256

PVTD

newbie

Activity: 2

Merit: 0

Howdy!
Whatever I do as setting to start up the mining, I get multiple errors, but then again, I am pretty new in this world.
I have had every problem in this thread, and I can't figure out what to do Tongue

My info is:
Ati HD 7650M
i7 Ivy
Ati drivers 13.12 x64

Iv tried a lot of different BAT files, almost all those I could find here, but get errors like: Command options, not selected GPU, shares difficulty, unable to connect and more.
This is the latest string I have " sgminer.exe -a quark -o stratum+tcp://qrk.suprnova.cc:6666 -u PVTD.mypc -p pass " and thats very basic

(Fails to read config)
Any help would be awesome!
PV

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: gg234 on April 24, 2014, 09:08:45 AM

Can you please post sgminer.conf for R9 280x for twecoin

Thank you

Quote from: Amph on April 14, 2014, 03:16:28 PM

11MH/s for the 290 mining twecoin, seems a bit low, my 280x does 10MH/s

just the one in the op core 1100/ mem 1500

badman74

hero member

Activity: 658

Merit: 500

Quote from: gotqn on April 26, 2014, 05:42:22 AM

Hi, I am using the master of https://github.com/sgminer-dev/sgminer with the following settings:

Code:

{
"pools" :
[
        {
                "url" : "stratum+tcp://stratum-eu.suchpool.pw:3335",
                "user" : "test.test1",
                "pass" : "test123"
        }
],
"intensity" : "13",
"gpu-engine" : "1100",
"gpu-fan" : "85",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "75",
"thread-concurrency" : "8193",
"worksize" : "256",
"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",
"kernel-path" : "/usr/local/bin",
"kernel" : "zuikkis",
"algorithm" : "nscrypt"
}

but I am getting

Code:

"rejected" by (low difficulty share of *.**)

With the settings above but using scrypt I am geetting over 1.5 Mh mining LTC for example.

Could anyone assist?

I am using:

AMD Catalyst™ 13.12 Proprietary Linux x86 Display Driver
Ubuntu 12.04.2
master https://github.com/sgminer-dev/sgminer

because you are trying to mine darkcoin (x11) with nscrypt instead of darkcoin (x11) algo
try one of the sgminer downloads from the OP.
the one you are using does not support darkcoin algo
also it would have been much easier to figure this out if you had just told us what coin you were trying to mine...

gotqn

newbie

Activity: 44

Merit: 0

Hi, I am using the master of https://github.com/sgminer-dev/sgminer with the following settings:

Code:

{
"pools" :
[
        {
                "url" : "stratum+tcp://stratum-eu.suchpool.pw:3335",
                "user" : "test.test1",
                "pass" : "test123"
        }
],
"intensity" : "13",
"gpu-engine" : "1100",
"gpu-fan" : "85",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "75",
"thread-concurrency" : "8193",
"worksize" : "256",
"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",
"kernel-path" : "/usr/local/bin",
"kernel" : "zuikkis",
"algorithm" : "nscrypt"
}

but I am getting

Code:

"rejected" by (low difficulty share of *.**)

With the settings above but using scrypt I am geetting over 1.5 Mh mining LTC for example.

Could anyone assist?

I am using:

AMD Catalyst™ 13.12 Proprietary Linux x86 Display Driver
Ubuntu 12.04.2
master https://github.com/sgminer-dev/sgminer

ursidae1

newbie

Activity: 7

Merit: 0

Quote from: badman74 on April 25, 2014, 07:21:15 PM

Quote from: ursidae1 on April 25, 2014, 04:40:38 PM

I am using sgminer 4.1.0-85 for mining a coin with the darkcoin kernel.
I noticed that there are newer versions like 4.1.153-159
Is there a point in downloading the newest version?

I run 1 r9 290x giving me 2.9mh and 1 r9 290 giving me 2.6mh

not really unless you want to mine with a new algo

Thank you.

badman74

hero member

Activity: 658

Merit: 500

Quote from: ursidae1 on April 25, 2014, 04:40:38 PM

I am using sgminer 4.1.0-85 for mining a coin with the darkcoin kernel.
I noticed that there are newer versions like 4.1.153-159
Is there a point in downloading the newest version?

I run 1 r9 290x giving me 2.9mh and 1 r9 290 giving me 2.6mh

not really unless you want to mine with a new algo

Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 22. (Read 515713 times)