Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 45. (Read 515713 times)
March 23, 2014, 01:33:14 PM
How much ram have you on those miners ?
March 23, 2014, 12:46:49 PM
Could I have opinion of specialist about my Problem? I suspect a bug of the programm because that'is the only thing I had not check, someone can tell me if it's possible?
I offer on the other topic 30 Darkcoin Bounty to solve that problem, a nobody has a clue, but I get in touch with other that had the same problem.
Here is the facts:
I have 3 different R9 290, other people has 6 290 of other brand, after 10 minutes, the cards looses 10% of Hash.
That probelm happend only on R9 290 cars.
I'm on Bamt 1.6 from Bajawa, He is on windows 7, same problem.
All 290 on the same rig experiment the loss in the exact same second
if you put another card in the rigg that is not a 290, all the 290 had a loss, but not the other card
The cards are cold.
The problem happenedonly with sph-darkcoin miner, if I mine Litecoin, I'm stable.
I split the cards with 2 PSU, does not change a thing, cards crashed at the same time, no matter what psu they are plugged.
I change motherboard, does not change a thing.
I run 4 different sgminer, each one with one card activated: even I did launch them with a delay of 3 minutes, 10 minutes later, all the instance with a 290 had a 10% lossat the same time
I launched sgminer without a .conf: only intensity in the parameters: happened with I:18 and I:21 (0% rejected, cards should worked with high intensity)
Once I got the loss only a cold reboot can recover the missing hash. If I mine restart only the miner, it restart but is capped to 90% of max hashrate.
I'm getting out of hints. If the problem is in the programm, I shoud stop wasting my time. If it is not, I will keep investigate, even if I think I already get pretty far.
PS: as usual, english is not my first languagae, so if I offensed any-one, it was not intended.
I offer on the other topic 30 Darkcoin Bounty to solve that problem, a nobody has a clue, but I get in touch with other that had the same problem.
Here is the facts:
I have 3 different R9 290, other people has 6 290 of other brand, after 10 minutes, the cards looses 10% of Hash.
That probelm happend only on R9 290 cars.
I'm on Bamt 1.6 from Bajawa, He is on windows 7, same problem.
All 290 on the same rig experiment the loss in the exact same second
if you put another card in the rigg that is not a 290, all the 290 had a loss, but not the other card
The cards are cold.
The problem happenedonly with sph-darkcoin miner, if I mine Litecoin, I'm stable.
I split the cards with 2 PSU, does not change a thing, cards crashed at the same time, no matter what psu they are plugged.
I change motherboard, does not change a thing.
I run 4 different sgminer, each one with one card activated: even I did launch them with a delay of 3 minutes, 10 minutes later, all the instance with a 290 had a 10% lossat the same time
I launched sgminer without a .conf: only intensity in the parameters: happened with I:18 and I:21 (0% rejected, cards should worked with high intensity)
Once I got the loss only a cold reboot can recover the missing hash. If I mine restart only the miner, it restart but is capped to 90% of max hashrate.
I'm getting out of hints. If the problem is in the programm, I shoud stop wasting my time. If it is not, I will keep investigate, even if I think I already get pretty far.
PS: as usual, english is not my first languagae, so if I offensed any-one, it was not intended.
Bumping this question, and adding my details. I have the same problem.
It's across 5 computers, all different motherboards. Running 10 cards, all 290s. 7 reference asus . . mix of hynix and elpida. 3 nonref asus . . all elpida. 3 bronze psu's, 1 silver and 1 platinum. All on win 7 64 bit. Fresh installs all of them. I use the comps for other things . . that's why there's only 2 in each comp.
Anyways, the hashes and cards are completely stable except for this drop in hashrate.
It starts at 2.4M#, and drops to 2.0M# (running at stock clocks for the gpu's) after a certain amount of time. Can't get these back unless restarting the computer. It will run at 2.0m# for a week straight . . so no stability issues.
I don't have this problem with other mining software . . so what could be causing it with this software?
Also, I'm throwing another 30 drk on top of boubou's bounty . . so you'll now get 60 drk for a successful fix for this.
March 23, 2014, 10:23:46 AM
Since no one else posted it here is PHM's latest build
https://www.dropbox.com/s/6ugz5sfz9sluhzr/sgminer_Mar_22_2014.rar
https://mega.co.nz/#!6ExQEIZR!skZC-GTW2ESXdue4R7DwF0CfbkzhoFq3qhLRkfbX_WI
https://drive.google.com/file/d/0B8NA-05oUjR8cE00WHYxbDNta2c/edit?usp=sharing
edit: also please fix this on the OP
Example usage - AnimeCoin:
should be
Example usage - AnimeCoin:
https://www.dropbox.com/s/6ugz5sfz9sluhzr/sgminer_Mar_22_2014.rar
https://mega.co.nz/#!6ExQEIZR!skZC-GTW2ESXdue4R7DwF0CfbkzhoFq3qhLRkfbX_WI
https://drive.google.com/file/d/0B8NA-05oUjR8cE00WHYxbDNta2c/edit?usp=sharing
edit: also please fix this on the OP
Example usage - AnimeCoin:
Code:
GPU_MAX_ALLOC_PERCENT=100 ./sgminer -k inkcoin -o: -u -p -I 15 -g 4 -w 64
should be
Example usage - AnimeCoin:
Code:
GPU_MAX_ALLOC_PERCENT=100 ./sgminer -k animecoin -o: -u -p -I 15 -g 4 -w 64
March 23, 2014, 09:29:55 AM
Hi badman74 .
Can you explain why a radeon 5850 give me 14 mh/s with your groestl algo and why my radeon 290 give me approximately the same score ?
Don't you think that your algorithm is not enough optimized for last generation of radeons ?
i didn't build the algo so i don't know about that part but that does seem oddCan you explain why a radeon 5850 give me 14 mh/s with your groestl algo and why my radeon 290 give me approximately the same score ?
Don't you think that your algorithm is not enough optimized for last generation of radeons ?
it sounds like it is optimized specifically for the 5850...
my 290x gets 9.5Mh/s, 6850 gets 3.9Mh/s, and 7750 get 1.28Mh/s
March 23, 2014, 09:22:08 AM
Hi badman74 .
Can you explain why a radeon 5850 give me 14 mh/s with your groestl algo and why my radeon 290 give me approximately the same score ?
Don't you think that your algorithm is not enough optimized for last generation of radeons ?
Can you explain why a radeon 5850 give me 14 mh/s with your groestl algo and why my radeon 290 give me approximately the same score ?
Don't you think that your algorithm is not enough optimized for last generation of radeons ?
March 23, 2014, 08:52:41 AM
sgminer.exe --gpu-engine 950,920,950,950 --gpu-memclock 1150,1100,1400,1400 -I 16 -g 2 -w 256 --config ANI.conf
What about ANI.conf ?Are your cards with 2GB ram? Mine is with 1GB, can't think of anything else that could prevent it.. the system is with intel cpu with 12GB ram ;/
And win8.0&Cat13.12 ... but my 5850 which also cant compile with -w 256 are on Win7, so its not the OS then :S
IS there a possibility to try a run on my GPU with bin from yours?
"pools" : [
{
"poolname" : "Solo",
"url" : "192.168.1.197:2121",
"user" : "badman74",
"pass" : "x",
"pool-priority" : "1",
"state" : "enabled"
},
{
"poolname" : "CPU Pool",
"url" : "stratum+tcp://ani.cpu-pool.net:3550",
"user" : "badman74.2",
"pass" : "x",
"pool-priority" : "0",
"state" : "enabled"
},
{
"poolname" : "ZCoins P2Pool",
"url" : "http://ani.zcoins.org:9792",
"user" : xxxxxxxxxxxxxxx
"pass" : "x",
"pool-priority" : "1",
"state" : "enabled"
}
]
,
"kernel" : "animecoin",
"temp-hysteresis" : "5",
"kernel-path" : "/usr/local/bin"
}
hmm all mine are on win 7
you may be able to use my bins if everything is the same...
not sure since yours are 6870's and mine are 6850's
also you will have to use my build of sgminer as it supports n-factor-scrypt and builds the bins a little differently
also my cards are 1 gb and catalyst 13.12
here are my .bin files, not sure which is which though
https://mega.co.nz/#!bVwmmbYB!LFSkJJzKpiSxvtZGVFUH3L3Sbi7Y0DyRTkDt7NOSlpQ
https://mega.co.nz/#!OdIXHRZR!3o59gVZMR907giSI6Z2xpYQt6hbCX2aR_c77tsdybas
March 23, 2014, 08:21:03 AM
sgminer.exe --gpu-engine 950,920,950,950 --gpu-memclock 1150,1100,1400,1400 -I 16 -g 2 -w 256 --config ANI.conf
What about ANI.conf ?Are your cards with 2GB ram? Mine is with 1GB, can't think of anything else that could prevent it.. the system is with intel cpu with 12GB ram ;/
And win8.0&Cat13.12 ... but my 5850 which also cant compile with -w 256 are on Win7, so its not the OS then :S
IS there a possibility to try a run on my GPU with bin from yours?
March 23, 2014, 07:11:02 AM
So, the hashrate is the unique thing to worry about ?
As I understood from that tutorial: most important is hashrate and WU.
March 23, 2014, 06:56:35 AM
So, the hashrate is the unique thing to worry about ?
March 23, 2014, 06:51:43 AM
A noob question :
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
As far as i know, it's differences are how the load is given to the card.
More threads (not too much, i'm running 1 most, always trying to get 2 to run) seem to work smoother, because the system seems not so busy to me with 2 threads.
On the most threads (Forum) I've read, that not every card is willing to do 2 threads.
There is a good tutorial:
http://www.overclock.net/t/1461916/tutorial-ultimate-guide-to-tweaking-amd-cgminer-3-7-2-kalroth-edition-sgminer-instructions-included-aswell-get-the-most-hash-out-of-your-gpu
Thanks for your answer,
For example, i get ~5MHs for a each 280x on my rig with Groestlcoin algo. (and ~11 with Myr-groestl) with 2 threads or 4, as showed as example on OP. If i use only one thread, i get better hashrate (6.5 with groestlcoin.. !)
So i wondered if the hashrate is the only thing we have to check, or if a 5MH/s with 4 threads is better than a ~6.5MHs with one thread
Using 10 threads on 6770
Difference on groestl coin is not so big : ~3.1 vs 2.9 with 2 threads. But on Myriad-groestl i get 5.8 vs 4.4Mh/s
So it's worth it...edit: by the way, also using 256 work size... With -w 64 much lower hashrate...
March 23, 2014, 06:49:20 AM
A noob question :
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
As far as i know, it's differences are how the load is given to the card.
More threads (not too much, i'm running 1 most, always trying to get 2 to run) seem to work smoother, because the system seems not so busy to me with 2 threads.
On the most threads (Forum) I've read, that not every card is willing to do 2 threads.
There is a good tutorial:
http://www.overclock.net/t/1461916/tutorial-ultimate-guide-to-tweaking-amd-cgminer-3-7-2-kalroth-edition-sgminer-instructions-included-aswell-get-the-most-hash-out-of-your-gpu
Thanks for your answer,
For example, i get ~5MHs for a each 280x on my rig with Groestlcoin algo. (and ~11 with Myr-groestl) with 2 threads or 4, as showed as example on OP. If i use only one thread, i get better hashrate (6.5 with groestlcoin.. !)
So i wondered if the hashrate is the only thing we have to check, or if a 5MH/s with 4 threads is better than a ~6.5MHs with one thread
March 23, 2014, 06:42:07 AM
A noob question :
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
As far as i know, it's differences are how the load is given to the card.
More threads (not too much, i'm running 1 most, always trying to get 2 to run) seem to work smoother, because the system seems not so busy to me with 2 threads.
On the most threads (Forum) I've read, that not every card is willing to do 2 threads.
There is a good tutorial:
http://www.overclock.net/t/1461916/tutorial-ultimate-guide-to-tweaking-amd-cgminer-3-7-2-kalroth-edition-sgminer-instructions-included-aswell-get-the-most-hash-out-of-your-gpu
March 23, 2014, 06:28:32 AM
A noob question :
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
At the same hashrate, what's the difference between 1,2 or 4 threads ? Is it better to have 4 threads giving 5MHs than 1 thread giving 6.5 MHs ? (groestlcoin algo for example)
March 23, 2014, 04:04:55 AM
Could I have opinion of specialist about my Problem? I suspect a bug of the programm because that'is the only thing I had not check, someone can tell me if it's possible?
I offer on the other topic 30 Darkcoin Bounty to solve that problem, a nobody has a clue, but I get in touch with other that had the same problem.
Here is the facts:
I have 3 different R9 290, other people has 6 290 of other brand, after 10 minutes, the cards looses 10% of Hash.
That probelm happend only on R9 290 cars.
I'm on Bamt 1.6 from Bajawa, He is on windows 7, same problem.
All 290 on the same rig experiment the loss in the exact same second
if you put another card in the rigg that is not a 290, all the 290 had a loss, but not the other card
The cards are cold.
The problem happenedonly with sph-darkcoin miner, if I mine Litecoin, I'm stable.
I split the cards with 2 PSU, does not change a thing, cards crashed at the same time, no matter what psu they are plugged.
I change motherboard, does not change a thing.
I run 4 different sgminer, each one with one card activated: even I did launch them with a delay of 3 minutes, 10 minutes later, all the instance with a 290 had a 10% lossat the same time
I launched sgminer without a .conf: only intensity in the parameters: happened with I:18 and I:21 (0% rejected, cards should worked with high intensity)
Once I got the loss only a cold reboot can recover the missing hash. If I mine restart only the miner, it restart but is capped to 90% of max hashrate.
I'm getting out of hints. If the problem is in the programm, I shoud stop wasting my time. If it is not, I will keep investigate, even if I think I already get pretty far.
PS: as usual, english is not my first languagae, so if I offensed any-one, it was not intended.
I offer on the other topic 30 Darkcoin Bounty to solve that problem, a nobody has a clue, but I get in touch with other that had the same problem.
Here is the facts:
I have 3 different R9 290, other people has 6 290 of other brand, after 10 minutes, the cards looses 10% of Hash.
That probelm happend only on R9 290 cars.
I'm on Bamt 1.6 from Bajawa, He is on windows 7, same problem.
All 290 on the same rig experiment the loss in the exact same second
if you put another card in the rigg that is not a 290, all the 290 had a loss, but not the other card
The cards are cold.
The problem happenedonly with sph-darkcoin miner, if I mine Litecoin, I'm stable.
I split the cards with 2 PSU, does not change a thing, cards crashed at the same time, no matter what psu they are plugged.
I change motherboard, does not change a thing.
I run 4 different sgminer, each one with one card activated: even I did launch them with a delay of 3 minutes, 10 minutes later, all the instance with a 290 had a 10% lossat the same time
I launched sgminer without a .conf: only intensity in the parameters: happened with I:18 and I:21 (0% rejected, cards should worked with high intensity)
Once I got the loss only a cold reboot can recover the missing hash. If I mine restart only the miner, it restart but is capped to 90% of max hashrate.
I'm getting out of hints. If the problem is in the programm, I shoud stop wasting my time. If it is not, I will keep investigate, even if I think I already get pretty far.
PS: as usual, english is not my first languagae, so if I offensed any-one, it was not intended.
March 23, 2014, 01:45:06 AM
my build is updated and working
i got 370Mh/s on drwarfpool with 2 290x at 150Mh/s each, 2 7750 at 25Mh/s each, and 2 6850 at a pitiful 10Mh/s each (usually they do 2 to 3 times the output of my 7750's)
Yup, something in Fugue doesn't like non-GCN cores i got 370Mh/s on drwarfpool with 2 290x at 150Mh/s each, 2 7750 at 25Mh/s each, and 2 6850 at a pitiful 10Mh/s each (usually they do 2 to 3 times the output of my 7750's)
Badman can you share your conf file for ANI ?
I'm getting 20-25% les hasrate with 6870 vs your 6850 :O
Also van't increase worksize above 128, while 6970 happily makes 2MH with -w 256 :S
March 23, 2014, 01:38:32 AM
my build is updated and working
i got 370Mh/s on drwarfpool with 2 290x at 150Mh/s each, 2 7750 at 25Mh/s each, and 2 6850 at a pitiful 10Mh/s each (usually they do 2 to 3 times the output of my 7750's)
Yup, something in Fugue doesn't like non-GCN cores i got 370Mh/s on drwarfpool with 2 290x at 150Mh/s each, 2 7750 at 25Mh/s each, and 2 6850 at a pitiful 10Mh/s each (usually they do 2 to 3 times the output of my 7750's)
Badman can you share your conf file for ANI ?
I'm getting 20-25% les hasrate with 6870 vs your 6850 :O
Also van't increase worksize above 128, while 6970 happily makes 2MH with -w 256 :S
March 22, 2014, 11:21:38 PM
WORK !!!! -> http://dwarfpool.com/fc
For fugue this one was already outdated.
Here is the new link:
UPLOADED : http://ul.to/0ofppj9f
DropBox: https://www.dropbox.com/s/966txs08z25ofy7/sph-sgminer-bin-201403230215.rar
GitHub : https://github.com/DJstone/sph-sgminer
NOT WORKING >... !!! http://dwarfpool.com/fc
On my way
There are the actual binarys from phm's last merge:
http://ul.to/mqn3ueqg
Seems like not the last version, as there is no groestlcoin.cl in kernel catalogue.
Here is the final source with groestlcoin: https://github.com/prettyhatemachine/sph-sgminer
Could someone compile it? I can't install MinGw on my PC- getting errors
there is groestelcoin.cl in kernel folder.
So dunno what u are meaning
Downloaded sph-sgminer-DJstone.rar.
Extracted: no groestlcoin.cl in kernel catalogue. Running sgminer with -k groestlcoin parameter gives an error in setting -k parameter. What does this mean? It's not compiled from the latest source...
I could compile it myself, but can't get MinGw installed
maybe i did pack the wrong files.
Give me a second try...
sry guys
Sooooo
This one should work:
http://ul.to/gsyb7o17
thank you now it works
Could you share it by uploading it to dropbox or similar service?
This is a DropBox link:
https://www.dropbox.com/s/a7ha1trod7yh8xr/sph-sgminer-bin.rar
Thanks phm for groestlcoin implementation. Anyone can compile it for Windows, plz
Yes that would be wonderful please anybodyhttp://ul.to/mqn3ueqg
Seems like not the last version, as there is no groestlcoin.cl in kernel catalogue.
Here is the final source with groestlcoin: https://github.com/prettyhatemachine/sph-sgminer
Could someone compile it? I can't install MinGw on my PC- getting errors
there is groestelcoin.cl in kernel folder.
So dunno what u are meaning
Downloaded sph-sgminer-DJstone.rar.
Extracted: no groestlcoin.cl in kernel catalogue. Running sgminer with -k groestlcoin parameter gives an error in setting -k parameter. What does this mean? It's not compiled from the latest source...
I could compile it myself, but can't get MinGw installed
maybe i did pack the wrong files.
Give me a second try...
sry guys
Sooooo
This one should work:
http://ul.to/gsyb7o17
This is a DropBox link:
https://www.dropbox.com/s/a7ha1trod7yh8xr/sph-sgminer-bin.rar
For fugue this one was already outdated.
Here is the new link:
UPLOADED : http://ul.to/0ofppj9f
DropBox: https://www.dropbox.com/s/966txs08z25ofy7/sph-sgminer-bin-201403230215.rar
GitHub : https://github.com/DJstone/sph-sgminer
i got 370Mh/s on drwarfpool with 2 290x at 150Mh/s each, 2 7750 at 25Mh/s each, and 2 6850 at a pitiful 10Mh/s each (usually they do 2 to 3 times the output of my 7750's)
March 22, 2014, 10:47:20 PM
WORK !!!! -> http://dwarfpool.com/fc
For fugue this one was already outdated.
Here is the new link:
UPLOADED : http://ul.to/0ofppj9f
DropBox: https://www.dropbox.com/s/966txs08z25ofy7/sph-sgminer-bin-201403230215.rar
GitHub : https://github.com/DJstone/sph-sgminer
NOT WORKING >... !!! http://dwarfpool.com/fc
On my way
There are the actual binarys from phm's last merge:
http://ul.to/mqn3ueqg
Seems like not the last version, as there is no groestlcoin.cl in kernel catalogue.
Here is the final source with groestlcoin: https://github.com/prettyhatemachine/sph-sgminer
Could someone compile it? I can't install MinGw on my PC- getting errors
there is groestelcoin.cl in kernel folder.
So dunno what u are meaning
Downloaded sph-sgminer-DJstone.rar.
Extracted: no groestlcoin.cl in kernel catalogue. Running sgminer with -k groestlcoin parameter gives an error in setting -k parameter. What does this mean? It's not compiled from the latest source...
I could compile it myself, but can't get MinGw installed
maybe i did pack the wrong files.
Give me a second try...
sry guys
Sooooo
This one should work:
http://ul.to/gsyb7o17
thank you now it works
Could you share it by uploading it to dropbox or similar service?
This is a DropBox link:
https://www.dropbox.com/s/a7ha1trod7yh8xr/sph-sgminer-bin.rar
Thanks phm for groestlcoin implementation. Anyone can compile it for Windows, plz
Yes that would be wonderful please anybodyhttp://ul.to/mqn3ueqg
Seems like not the last version, as there is no groestlcoin.cl in kernel catalogue.
Here is the final source with groestlcoin: https://github.com/prettyhatemachine/sph-sgminer
Could someone compile it? I can't install MinGw on my PC- getting errors
there is groestelcoin.cl in kernel folder.
So dunno what u are meaning
Downloaded sph-sgminer-DJstone.rar.
Extracted: no groestlcoin.cl in kernel catalogue. Running sgminer with -k groestlcoin parameter gives an error in setting -k parameter. What does this mean? It's not compiled from the latest source...
I could compile it myself, but can't get MinGw installed
maybe i did pack the wrong files.
Give me a second try...
sry guys
Sooooo
This one should work:
http://ul.to/gsyb7o17
This is a DropBox link:
https://www.dropbox.com/s/a7ha1trod7yh8xr/sph-sgminer-bin.rar
For fugue this one was already outdated.
Here is the new link:
UPLOADED : http://ul.to/0ofppj9f
DropBox: https://www.dropbox.com/s/966txs08z25ofy7/sph-sgminer-bin-201403230215.rar
GitHub : https://github.com/DJstone/sph-sgminer
March 22, 2014, 10:11:01 PM
Thanks phm for groestlcoin implementation. Anyone can compile it for Windows, plz
Yes that would be wonderful please anybodyhttp://ul.to/mqn3ueqg
Seems like not the last version, as there is no groestlcoin.cl in kernel catalogue.
Here is the final source with groestlcoin: https://github.com/prettyhatemachine/sph-sgminer
Could someone compile it? I can't install MinGw on my PC- getting errors
there is groestelcoin.cl in kernel folder.
So dunno what u are meaning
Downloaded sph-sgminer-DJstone.rar.
Extracted: no groestlcoin.cl in kernel catalogue. Running sgminer with -k groestlcoin parameter gives an error in setting -k parameter. What does this mean? It's not compiled from the latest source...
I could compile it myself, but can't get MinGw installed
maybe i did pack the wrong files.
Give me a second try...
sry guys
also newest binaries are in my github repo
the link is in my sig
edit: sorry adding the new groestlcoin algo now
March 22, 2014, 09:37:16 PM
WORK !!!! -> http://dwarfpool.com/fc
For fugue this one was already outdated.
Here is the new link:
UPLOADED : http://ul.to/0ofppj9f
DropBox: https://www.dropbox.com/s/966txs08z25ofy7/sph-sgminer-bin-201403230215.rar
GitHub : https://github.com/DJstone/sph-sgminer
NOT WORKING >... !!! http://dwarfpool.com/fc
On my way
There are the actual binarys from phm's last merge:
http://ul.to/mqn3ueqg
Seems like not the last version, as there is no groestlcoin.cl in kernel catalogue.
Here is the final source with groestlcoin: https://github.com/prettyhatemachine/sph-sgminer
Could someone compile it? I can't install MinGw on my PC- getting errors
there is groestelcoin.cl in kernel folder.
So dunno what u are meaning
Downloaded sph-sgminer-DJstone.rar.
Extracted: no groestlcoin.cl in kernel catalogue. Running sgminer with -k groestlcoin parameter gives an error in setting -k parameter. What does this mean? It's not compiled from the latest source...
I could compile it myself, but can't get MinGw installed
maybe i did pack the wrong files.
Give me a second try...
sry guys
Sooooo
This one should work:
http://ul.to/gsyb7o17
thank you now it works
Could you share it by uploading it to dropbox or similar service?
This is a DropBox link:
https://www.dropbox.com/s/a7ha1trod7yh8xr/sph-sgminer-bin.rar
Thanks phm for groestlcoin implementation. Anyone can compile it for Windows, plz
Yes that would be wonderful please anybodyhttp://ul.to/mqn3ueqg
Seems like not the last version, as there is no groestlcoin.cl in kernel catalogue.
Here is the final source with groestlcoin: https://github.com/prettyhatemachine/sph-sgminer
Could someone compile it? I can't install MinGw on my PC- getting errors
there is groestelcoin.cl in kernel folder.
So dunno what u are meaning
Downloaded sph-sgminer-DJstone.rar.
Extracted: no groestlcoin.cl in kernel catalogue. Running sgminer with -k groestlcoin parameter gives an error in setting -k parameter. What does this mean? It's not compiled from the latest source...
I could compile it myself, but can't get MinGw installed
maybe i did pack the wrong files.
Give me a second try...
sry guys
Sooooo
This one should work:
http://ul.to/gsyb7o17
This is a DropBox link:
https://www.dropbox.com/s/a7ha1trod7yh8xr/sph-sgminer-bin.rar
For fugue this one was already outdated.
Here is the new link:
UPLOADED : http://ul.to/0ofppj9f
DropBox: https://www.dropbox.com/s/966txs08z25ofy7/sph-sgminer-bin-201403230215.rar
GitHub : https://github.com/DJstone/sph-sgminer
Jump to: