[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 69.

kala_kutta

newbie

Activity: 1

Merit: 0

Hello everyone . I am total noob , this is the first time i am mining .
I get this error wheenve i try to run anyverion of cgminer or sgminer .
http://prntscr.com/2v4fe5

What could be the cause ?
I am running win 7 , dual graphics card . Intel 4000 and amd hd 7670M . 64 bit .

I mined 1 DRK using my linux vps , whoever helps gets that . Grin

Vann

hero member

Activity: 1036

Merit: 606

Thank you, a 8-9% 100 Kh/s increase with a HD7850 over 4.0.0!

billotronic

legendary

Activity: 1610

Merit: 1000

Crackpot Idealist

thanks for this!

phm

full member

Activity: 378

Merit: 110

DATABLOCKCHAIN.IO SALE IS LIVE | MVP @ DBC.IO

Quote from: kahir on February 22, 2014, 05:20:58 PM

is that normal .. i get so much hardware error in 1 min .... card is 7790 with q2c new miner

also after 15 min i get msg saying that miner is banned ... i close and reopen everything is fine ...

Problem with HW errors shall be fixed now, please recompile your miner from fresh sources and check again.

Little_boo

hero member

Activity: 795

Merit: 503

Quote from: phm on February 22, 2014, 10:35:38 PM

Hmm, one guy mining DarkCoin also had problems with 7790. Upgrading Catalyst drivers fixed the problem for him.

Which version of the drivers needed?

andyatcrux

legendary

Activity: 938

Merit: 1000

Quote from: phm on February 22, 2014, 10:35:38 PM

Quote from: kahir on February 22, 2014, 05:20:58 PM

is that normal .. i get so much hardware error in 1 min .... card is 7790 with q2c new miner

also after 15 min i get msg saying that miner is banned ... i close and reopen everything is fine ...

Hmm, one guy mining DarkCoin also had problems with 7790. Upgrading Catalyst drivers fixed the problem for him.

How are you getting that speed with a 7790? Mine are getting half that at best. My 270s are getting that speed.

phm

full member

Activity: 378

Merit: 110

DATABLOCKCHAIN.IO SALE IS LIVE | MVP @ DBC.IO

Quote from: kahir on February 22, 2014, 05:20:58 PM

is that normal .. i get so much hardware error in 1 min .... card is 7790 with q2c new miner

also after 15 min i get msg saying that miner is banned ... i close and reopen everything is fine ...

Hmm, one guy mining DarkCoin also had problems with 7790. Upgrading Catalyst drivers fixed the problem for him.

wyj1888

full member

Activity: 164

Merit: 100

Quote from: kahir on February 22, 2014, 05:20:58 PM

is that normal .. i get so much hardware error in 1 min .... card is 7790 with q2c new miner

also after 15 min i get msg saying that miner is banned ... i close and reopen everything is fine ...

can you give me the GPU miner for Q2C?thank you

xorpheus

member

Activity: 75

Merit: 10

Quote from: child_harold on February 22, 2014, 04:59:50 PM

I've overclocked my r9 290 21227-00-50G using TRIXX:

gpu core from 947 to 1000 and memory from 1250 to 1350

this gives me an extra 5% or so. (2.35Mh/s > 2.45Mh/s)

My question is whether people think this overclock is safe? i don't want to burn my card or shorten life expectancy too much.
Temps are low at 65c. There are no HW errors and everything SEEMS fine. Do you think it is?

Thanks in advance for the feedback.

You're fine. The cards will usually become unstable before you can push it far enough to do physical damage, UNLESS... you are boosting the core voltage as well. Push the clocks as far as you like with temps that low. I have been running 4 x 7950s for 6 months at 1150MHz core, temps 75 to 85C.

kahir

legendary

Activity: 1050

Merit: 1000

is that normal .. i get so much hardware error in 1 min .... card is 7790 with q2c new miner

also after 15 min i get msg saying that miner is banned ... i close and reopen everything is fine ...

child_harold

hero member

Activity: 812

Merit: 1000

Quote from: phm on February 22, 2014, 05:05:17 PM

Quote from: child_harold on February 22, 2014, 04:59:50 PM

I've overclocked my r9 290 21227-00-50G using TRIXX:

gpu core from 947 to 1000 and memory from 1250 to 1350

this gives me an extra 5% or so. (2.35Mh/s > 2.45Mh/s)

My question is whether people think this overclock is safe? i don't want to burn my card or shorten life expectancy too much.
Temps are low at 65c. There are no HW errors and everything SEEMS fine. Do you think it is?

Thanks in advance for the feedback.

I think it's safe, I was running 1000/1500 on four R9 290 for a month without any problems.

thanks for the reply. did u notice any diff between say 1350 and 1500 memory speeds? I have not tested 1500 yet but i doubt it would make much difference to hashrates. Any thoughts?

phm

full member

Activity: 378

Merit: 110

DATABLOCKCHAIN.IO SALE IS LIVE | MVP @ DBC.IO

Quote from: child_harold on February 22, 2014, 04:59:50 PM

I've overclocked my r9 290 21227-00-50G using TRIXX:

gpu core from 947 to 1000 and memory from 1250 to 1350

this gives me an extra 5% or so. (2.35Mh/s > 2.45Mh/s)

My question is whether people think this overclock is safe? i don't want to burn my card or shorten life expectancy too much.
Temps are low at 65c. There are no HW errors and everything SEEMS fine. Do you think it is?

Thanks in advance for the feedback.

I think it's safe, I was running 1000/1500 on four R9 290 for a month without any problems.

child_harold

hero member

Activity: 812

Merit: 1000

I've overclocked my r9 290 21227-00-50G using TRIXX:

gpu core from 947 to 1000 and memory from 1250 to 1350

this gives me an extra 5% or so. (2.35Mh/s > 2.45Mh/s)

My question is whether people think this overclock is safe? i don't want to burn my card or shorten life expectancy too much.
Temps are low at 65c. There are no HW errors and everything SEEMS fine. Do you think it is?

Thanks in advance for the feedback.

phm

full member

Activity: 378

Merit: 110

DATABLOCKCHAIN.IO SALE IS LIVE | MVP @ DBC.IO

Quote from: kahir on February 22, 2014, 04:42:05 PM

Phm are u working on making windows Gpu miner for q2c ?

No, I'm only providing source code.

kahir

legendary

Activity: 1050

Merit: 1000

Phm are u working on making windows Gpu miner for q2c ?

p4r4m0un7

sr. member

Activity: 406

Merit: 250

Quote from: Patejl on February 21, 2014, 08:24:13 AM

2290 with Radeon 7970. Thanks. Kiss

Hi, can you post settings please. I have reached 1790 with 7970. I am starting with bat file:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u username -p password -I 13 --lookup-gap 2 -w 256 --thread-concurrency 8192

clocks are - core 1025 and 1750 memory

Thank you in advance.

guysoft

newbie

Activity: 10

Merit: 0

Quote from: badman74 on February 21, 2014, 11:02:40 PM

Quote from: guysoft on February 21, 2014, 10:24:19 PM

Hmm, running on linux, and X crashes fairly quickly, the picture freezes. Before it does I manage to accept a few shared at 2.5 Mh/s

Using elbereth' settings on R9 290

Any ideas?

try basic settings to see if it will run first then try to optimize
sgminer -k darkcoin -I 18 -g 2 -w 256 -o stratum+tcp://pool.darkcoin.io:3333 -u username -p x

Ok that works and I get stable 2.2 Mh/s, thanks!

Shame though its not that profitable, just did the math and its ~ 0.002 btc / day at current rates.
Still will keep an eye on the coin, looks interesting.

xorpheus

member

Activity: 75

Merit: 10

Quote from: badman74 on February 22, 2014, 01:29:44 AM

Quote from: xorpheus on February 22, 2014, 01:09:12 AM

Quote from: badman74 on February 19, 2014, 09:58:02 PM

Quote from: Pustul on February 19, 2014, 09:45:37 PM

Thanks for the win build! Hashrate has increased but I don't have any control over my gpus with this version, no temps are displayed and no settings change.

here is my windows build of it https://mega.co.nz/#!2JYXHDpD!OOiFOdsh5rnvk1zhz5niXENNzbgnw1UXwmFcicBzevI i know the adl works on this version

Much better, thank you for sharing this! Still doesn't display pool URLs but I can live with that.

if you are using a conf file you can fix that like this
   {
      "poolname" : "DarkCoin P2P Pool",
      "url" : "stratum+tcp://112.175.123.82:8372",
      "user" : "XvRs67Wnw1n1Kwtq4ihhTpv699DdJpxdnt+.02",
      "pass" : "x",
      "pool-priority" : "1"
   }

Yes I am using a conf file and I thought I was setting the pool name but had the syntax wrong, was using just "name" instead of "poolname". Thanks!

badman74

hero member

Activity: 658

Merit: 500

Quote from: xorpheus on February 22, 2014, 01:09:12 AM

Quote from: badman74 on February 19, 2014, 09:58:02 PM

Quote from: Pustul on February 19, 2014, 09:45:37 PM

Thanks for the win build! Hashrate has increased but I don't have any control over my gpus with this version, no temps are displayed and no settings change.

here is my windows build of it https://mega.co.nz/#!2JYXHDpD!OOiFOdsh5rnvk1zhz5niXENNzbgnw1UXwmFcicBzevI i know the adl works on this version

Much better, thank you for sharing this! Still doesn't display pool URLs but I can live with that.

if you are using a conf file you can fix that like this
   {
      "poolname" : "DarkCoin P2P Pool",
      "url" : "stratum+tcp://112.175.123.82:8372",
      "user" : "XvRs67Wnw1n1Kwtq4ihhTpv699DdJpxdnt+.02",
      "pass" : "x",
      "pool-priority" : "1"
   }

xorpheus

member

Activity: 75

Merit: 10

Quote from: badman74 on February 19, 2014, 09:58:02 PM

Quote from: Pustul on February 19, 2014, 09:45:37 PM

Thanks for the win build! Hashrate has increased but I don't have any control over my gpus with this version, no temps are displayed and no settings change.

here is my windows build of it https://mega.co.nz/#!2JYXHDpD!OOiFOdsh5rnvk1zhz5niXENNzbgnw1UXwmFcicBzevI i know the adl works on this version

Much better, thank you for sharing this! Still doesn't display pool URLs but I can live with that.

Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 69. (Read 515718 times)