[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 111.

sueche

member

Activity: 63

Merit: 10

Does anyone know how to fix this on LOOP[0] ?
Even after restart of the miner it still on 760Hz-770Hz only.

notey

member

Activity: 67

Merit: 10

Thanks.

Quote from: klondike_bar on March 25, 2015, 05:06:14 PM

Quote from: bomberb17 on March 25, 2015, 09:16:17 AM

Another nice feature would be to multiply the "wall watts" number shown in the ASIC stats page with time to get total kWh consumed..

that is in the asic stats page (but cumulative kwh isnt)

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: bomberb17 on March 25, 2015, 09:16:17 AM

Another nice feature would be to multiply the "wall watts" number shown in the ASIC stats page with time to get total kWh consumed..

that is in the asic stats page (but cumulative kwh isnt)

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Anyone know which power connectors on the back of the SP20s are front and rear of the cards?

bomberb17

hero member

Activity: 773

Merit: 528

Another nice feature would be to multiply the "wall watts" number shown in the ASIC stats page with time to get total kWh consumed..

notey

member

Activity: 67

Merit: 10

Not really... Im only paying about .10 USD per kWh for electricity. About .065 if I can get a service change
Later this month. Besides, I like dealing with the machines. Anyone have any luck w hosted miners?

Quote from: notlist3d on March 24, 2015, 12:12:06 PM

Quote from: notey on March 24, 2015, 09:35:07 AM

I'm using 19 KWh per hour to generate 35 Ths. So, it looks like .5428 efficiency- best I can do with it. Can do better if I eliminate the AC on cold days (open bay doors).

Quote from: notey on March 24, 2015, 09:30:41 AM

Don't see that.

Quote from: thedreamer on March 24, 2015, 08:43:59 AM

If you look below that, do you have a wall watts number.
On the SP20s it shows total watts at the wall, although it always shows about 5% high vs what they actually use measured by my killawatt.

19 KWh is high. Have you thought about hosting? I would guess you could pay around half of what your paying now.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: notey on March 24, 2015, 09:35:07 AM

I'm using 19 KWh per hour to generate 35 Ths. So, it looks like .5428 efficiency- best I can do with it. Can do better if I eliminate the AC on cold days (open bay doors).

Quote from: notey on March 24, 2015, 09:30:41 AM

Don't see that.

Quote from: thedreamer on March 24, 2015, 08:43:59 AM

If you look below that, do you have a wall watts number.
On the SP20s it shows total watts at the wall, although it always shows about 5% high vs what they actually use measured by my killawatt.

19 KWh is high. Have you thought about hosting? I would guess you could pay around half of what your paying now.

notey

member

Activity: 67

Merit: 10

I'm using 19 KWh per hour to generate 35 Ths. So, it looks like .5428 efficiency- best I can do with it. Can do better if I eliminate the AC on cold days (open bay doors).

Quote from: notey on March 24, 2015, 09:30:41 AM

Don't see that.

Quote from: thedreamer on March 24, 2015, 08:43:59 AM

If you look below that, do you have a wall watts number.
On the SP20s it shows total watts at the wall, although it always shows about 5% high vs what they actually use measured by my killawatt.

notey

member

Activity: 67

Merit: 10

Don't see that.

Quote from: thedreamer on March 24, 2015, 08:43:59 AM

If you look below that, do you have a wall watts number.
On the SP20s it shows total watts at the wall, although it always shows about 5% high vs what they actually use measured by my killawatt.

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

If you look below that, do you have a wall watts number.
On the SP20s it shows total watts at the wall, although it always shows about 5% high vs what they actually use measured by my killawatt.

notey

member

Activity: 67

Merit: 10

This is what I'm showing on one of the ASIC stats page. showing 3543 Ghs. I'm relatively new to SP31 but seems highly efficient. I see 791w and 792w in brackets. Is that the measured power output for Psus? Then I guess the 791 and 792 are averages. This is the most efficient combination of settings I can find. If anyone can beat it let me know please.

Uptime:26250 | FPGA ver:62
-----BOARD-0-----
PSU[EMERSON1200]: 800->748w[748 748 748] (->791w[791 791 791]) (lim=750) 0c cooling:0/0x0
-----BOARD-1-----
PSU[EMERSON1200]: 784->748w[748 748 748] (->792w[792 792 792]) (lim=750) 0c cooling:0/0x0
LOOP[0] ON
0: DC2DC/1/:[vlt1:589 vlt2:594(DCl:794 Tl:794 Ul:669) 42W 72A 57c] ASIC:[ 85c (120c) 635hz(BL: 635) 731 (E:193) F:0]
1: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 42W 71A 57c] ASIC:[ 85c (120c) 630hz(BL: 630) 752 (E:193) F:0]
2: DC2DC/1/:[vlt1:589 vlt2:594(DCl:794 Tl:794 Ul:669) 37W 63A 49c] ASIC:[ 85c (120c) 570hz(BL: 570) 654 (E:193) F:0]
LOOP[1] ON
3: DC2DC/1/:[vlt1:593 vlt2:594(DCl:794 Tl:794 Ul:669) 36W 61A 55c] ASIC:[ 85c (120c) 545hz(BL: 545) 454 (E:192) F:0]
4: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 41W 70A 64c] ASIC:[ 85c (120c) 620hz(BL: 620) 741 (E:193) F:0]
5: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 43W 73A 65c] ASIC:[ 85c (120c) 655hz(BL: 655) 696 (E:193) F:0]
LOOP[2] ON
6: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 32W 54A 60c] ASIC:[ 85c (120c) 485hz(BL: 485) 519 (E:188) F:0]
7: DC2DC/1/:[vlt1:589 vlt2:594(DCl:794 Tl:794 Ul:669) 43W 74A 71c] ASIC:[ 85c (120c) 655hz(BL: 655) 766 (E:193) F:0]
8: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 42W 72A 62c] ASIC:[ 85c (120c) 640hz(BL: 640) 744 (E:193) F:0]
LOOP[3] ON
9: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 47W 79A 72c] ASIC:[ 85c (120c) 690hz(BL: 690) 798 (E:193) F:0]
10: DC2DC/1/:[vlt1:589 vlt2:592(DCl:794 Tl:794 Ul:669) 44W 74A 78c] ASIC:[ 85c (120c) 645hz(BL: 645) 766 (E:193) F:0]
11: DC2DC/1/:[vlt1:589 vlt2:592(DCl:794 Tl:794 Ul:669) 42W 72A 76c] ASIC:[ 85c (120c) 635hz(BL: 635) 730 (E:193) F:0]
LOOP[4] ON
12: DC2DC/1/:[vlt1:587 vlt2:592(DCl:794 Tl:794 Ul:669) 37W 63A 76c] ASIC:[ 85c (120c) 575hz(BL: 575) 687 (E:193) F:0]
13: DC2DC/1/:[vlt1:587 vlt2:592(DCl:794 Tl:794 Ul:669) 41W 69A 80c] ASIC:[ 85c (120c) 610hz(BL: 610) 738 (E:192) F:0]
14: DC2DC/1/:[vlt1:587 vlt2:592(DCl:794 Tl:794 Ul:669) 44W 75A 71c] ASIC:[ 85c (120c) 665hz(BL: 665) 797 (E:193) F:0]
LOOP[5] ON
15: DC2DC/1/:[vlt1:587 vlt2:592(DCl:794 Tl:794 Ul:669) 32W 55A 48c] ASIC:[ 85c (120c) 490hz(BL: 490) 613 (E:192) F:0]
16: DC2DC/1/:[vlt1:587 vlt2:592(DCl:794 Tl:794 Ul:669) 38W 65A 51c] ASIC:[ 85c (120c) 565hz(BL: 565) 615 (E:193) F:0]
17: DC2DC/1/:[vlt1:589 vlt2:592(DCl:794 Tl:794 Ul:669) 36W 62A 45c] ASIC:[ 85c (120c) 545hz(BL: 545) 585 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:589 vlt2:594(DCl:794 Tl:794 Ul:669) 35W 60A 54c] ASIC:[ 85c (120c) 530hz(BL: 530) 592 (E:193) F:0]
19: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 43W 73A 64c] ASIC:[ 85c (120c) 635hz(BL: 635) 764 (E:193) F:0]
20: DC2DC/1/:[vlt1:589 vlt2:594(DCl:794 Tl:794 Ul:669) 40W 68A 62c] ASIC:[ 85c (120c) 590hz(BL: 590) 638 (E:193) F:0]
LOOP[7] ON
21: DC2DC/1/:[vlt1:589 vlt2:594(DCl:794 Tl:794 Ul:669) 44W 74A 69c] ASIC:[ 85c (120c) 640hz(BL: 640) 732 (E:193) F:0]
22: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 39W 65A 67c] ASIC:[ 85c (120c) 575hz(BL: 575) 647 (E:193) F:0]
23: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 44W 74A 60c] ASIC:[ 85c (120c) 640hz(BL: 640) 714 (E:193) F:0]
LOOP[8] ON
24: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 43W 72A 66c] ASIC:[ 85c (120c) 620hz(BL: 620) 706 (E:193) F:0]
25: DC2DC/1/:[vlt1:587 vlt2:592(DCl:794 Tl:794 Ul:669) 45W 76A 80c] ASIC:[ 85c (120c) 665hz(BL: 665) 740 (E:193) F:0]
26: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 43W 73A 77c] ASIC:[ 85c (120c) 650hz(BL: 650) 771 (E:193) F:0]
LOOP[9] ON
27: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 43W 73A 79c] ASIC:[ 85c (120c) 635hz(BL: 635) 752 (E:193) F:0]
28: DC2DC/1/:[vlt1:589 vlt2:594(DCl:794 Tl:794 Ul:669) 47W 80A 83c] ASIC:[ 85c (120c) 690hz(BL: 690) 841 (E:193) F:0]
29: DC2DC/1/:[vlt1:591 vlt2:594(DCl:794 Tl:794 Ul:669) 44W 74A 68c] ASIC:[ 85c (120c) 635hz(BL: 635) 709 (E:193) F

Quote from: klondike_bar on March 24, 2015, 08:17:57 AM

Quote from: notey on March 24, 2015, 07:30:32 AM

I run my SP31s with the following settings, .64, .64, .67, and limit psus to 750w each. I run fans at 40 with air conditioning and ceiling exhaust fans and get 3.5 Ths at about 1500w.

Thats surprisingly good - i assume thats 1500W DC though, and closer to 1850W AC? generally the SP3X doesnt get more than 0.5W/GH efficient at the wall unless you really tune it low

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

On the SP20's I can get way with 0.49x efficiency once I go below 1TH/s. I'm sure the SP3x can hit the same thing as it's the same guts just more of it. No?

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: notey on March 24, 2015, 07:30:32 AM

I run my SP31s with the following settings, .64, .64, .67, and limit psus to 750w each. I run fans at 40 with air conditioning and ceiling exhaust fans and get 3.5 Ths at about 1500w.

Thats surprisingly good - i assume thats 1500W DC though, and closer to 1850W AC? generally the SP3X doesnt get more than 0.5W/GH efficient at the wall unless you really tune it low

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Quote from: miguelmorales85 on March 24, 2015, 07:15:19 AM

Quote from: thedreamer on March 23, 2015, 09:16:13 PM

Me too. I just started mining a few weeks ago, but have Antminers and Spondoolies.

The antminers are more quiet, yes, but the SP's IMO are just ... better. Heck I can reduce the fan to '4' in my office on 2 of them, hashing away at 1100GH/s@580watts and it is not overly loud. About the same as 2 S3's or C1's at full blast.

I have a new S5 coming this week but will probably just sell everything to buy more SP tech.

Now if only I could find a good deal on SP3x or some more cheap SP20's. Grin

a SP20 to '4' fan speed? wow. Is you office at freezing temperature? How much is the temp?

Just window open a little, and the SP20s sucking air from there. Temps are around 60-70 at the loops.

notey

member

Activity: 67

Merit: 10

I run my SP31s with the following settings, .64, .64, .67, and limit psus to 750w each. I run fans at 40 with air conditioning and ceiling exhaust fans and get 3.5 Ths at about 1500w. Inlet temp 29c exhaust 69c. Running my entire operation at about 1/3 reduction, but savings on electrical makes up for it. Underclocking has made room for several more Sp-31s but can't find any!

uote author=miguelmorales85 link=topic=521520.msg10870134#msg10870134 date=1427199319]

Quote from: thedreamer on March 23, 2015, 09:16:13 PM

Me too. I just started mining a few weeks ago, but have Antminers and Spondoolies.

The antminers are more quiet, yes, but the SP's IMO are just ... better. Heck I can reduce the fan to '4' in my office on 2 of them, hashing away at 1100GH/s@580watts and it is not overly loud. About the same as 2 S3's or C1's at full blast.

I have a new S5 coming this week but will probably just sell everything to buy more SP tech.

Now if only I could find a good deal on SP3x or some more cheap SP20's. Grin

a SP20 to '4' fan speed? wow. Is you office at freezing temperature? How much is the temp?
[/quote]

miguelmorales85

hero member

Activity: 544

Merit: 507

Quote from: thedreamer on March 23, 2015, 09:16:13 PM

Me too. I just started mining a few weeks ago, but have Antminers and Spondoolies.

The antminers are more quiet, yes, but the SP's IMO are just ... better. Heck I can reduce the fan to '4' in my office on 2 of them, hashing away at 1100GH/s@580watts and it is not overly loud. About the same as 2 S3's or C1's at full blast.

I have a new S5 coming this week but will probably just sell everything to buy more SP tech.

Now if only I could find a good deal on SP3x or some more cheap SP20's. Grin

a SP20 to '4' fan speed? wow. Is you office at freezing temperature? How much is the temp?

Dr Charles

legendary

Activity: 1708

Merit: 1080

Quote from: netmonk on March 24, 2015, 05:15:19 AM

Hello,

I ear that 16nm is gonna be delayed due to Samsung.
What about 20nm technology ?

for technical reasons I believe most are skipping the 20nm stage.

netmonk

full member

Activity: 219

Merit: 100

Hello,

I ear that 16nm is gonna be delayed due to Samsung.
What about 20nm technology ?

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: edgar on March 23, 2015, 10:20:47 AM

Quote from: notlist3d on March 23, 2015, 05:28:47 AM

Quote from: edgar on March 23, 2015, 04:48:15 AM

weeks, not days...

i opened my SP30, vacuum wouldnt budge the gunk, too tacky - high humidity.

toothbrush sorted em right out. still no hashing though >frowny face<

bit of a mission to get to the bottom board but why not eh.

has anyone discussed the 'reset button' on the MMC board anywhere?

Most who I have heard of use a recovery SD. Would be interesting on reset button, not sure what you will get there.

recovery SD is step 1

If MMC board is faulty, boot SD is required

If recovery & boot fail then the board needs replacing as explained by Guy recently (ish)

i just received shipping notification of the ribbons & the SP30 MMC board, no mention of SP20E board...

>500 hours downtime for SP20E & SP30... over 21 days of stalled communications with @support.

Hi Edgar,

I reviewed your ticket and there is no mention of requiring a new board for the SP20E.
Please work with support@ for your issues as that is the only official support channel.

Thanks,

Gadi

n00ber

sr. member

Activity: 588

Merit: 253

Any new models are expected in the nearest future? i've heard something about Bitfury+Spondoolies project. anyone can advise?

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 111. (Read 1260226 times)