Remember how fun it is to silently smile and nod condescendingly at a captive consumer base while adding $100 of pure profit margin to every unit sold just because you can? I guess Bitmain was having fun with the supply/demand curves and figured what the hey, why not.
I'm gonna side with Dogie's opinion that it might be BitFury. There's been pretty much zero publicity about their new chips, which I'd think they'd be rolling in it if they were actually impressed with the design. Spondoolies I doubt has a batchable ASIC yet (though I could be wrong) and though I've been drooling over BE300 since December, with everything that's gone wrong for ASICMiner lately, I figure either they put in an order months ago or not at all so the timing doesn't really make sense.
Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 126. (Read 1260226 times)
March 09, 2015, 10:32:26 PM
March 09, 2015, 10:15:55 PM
Quote
20 mins ago, we received a very important intelligence and we decide to increase the price of S5 by 20%. A certain competitor which we pay attention has not submit any mass production order to its wafer supplier. Only a small batch of pilot run has been submitted before the Chinese New Year. It has confirmed a long but uncertain guess that the aggressiveness get in trouble. The best time for mining bitcoin comes right now.
Source: https://www.facebook.com/Bitmain/posts/859782150729679
Only 1 competitor I can think of....
Whats going on Guy(s), is this price gouging, or based on real intelligence?
Asicminer? Dead / Soon to be Dead?
Bitfury? Very Large B2B only.
Spondoolies? Shipping.
Bitmain? Shipping.
Just a few in the B2B end of things.
S5's are the last models available now for purchase
SP31 are the last models available in stock from Spondoolies $2,075.00: http://www.spondoolies-tech.com/products/sp31-yukon-shipping-from-stock
So what do you expect is going to happen price wise?
Prices go down?
Do you remember when there were no units to be had?
March 09, 2015, 08:46:26 PM
Quote
20 mins ago, we received a very important intelligence and we decide to increase the price of S5 by 20%. A certain competitor which we pay attention has not submit any mass production order to its wafer supplier. Only a small batch of pilot run has been submitted before the Chinese New Year. It has confirmed a long but uncertain guess that the aggressiveness get in trouble. The best time for mining bitcoin comes right now.
Source: https://www.facebook.com/Bitmain/posts/859782150729679
Only 1 competitor I can think of....
Whats going on Guy(s), is this price gouging, or based on real intelligence?
It was at $320 this AM and then up it went. A lot of people are pissed but whether it represents the majority or is a vocal minority remains to be seen. I bailed on a purchase of a couple of units because of it.
March 09, 2015, 08:37:45 PM
Quote
20 mins ago, we received a very important intelligence and we decide to increase the price of S5 by 20%. A certain competitor which we pay attention has not submit any mass production order to its wafer supplier. Only a small batch of pilot run has been submitted before the Chinese New Year. It has confirmed a long but uncertain guess that the aggressiveness get in trouble. The best time for mining bitcoin comes right now.
Source: https://www.facebook.com/Bitmain/posts/859782150729679
Only 1 competitor I can think of....
Whats going on Guy(s), is this price gouging, or based on real intelligence?
March 09, 2015, 07:13:48 PM
If you want the kids full bio report as well as his partner in crime, I can provide all of that for you. I went to college with these nut jobs before they decided to take a year off to pursue this failure of a shit scamming spree.
I'm glad that I only tried one miner with them for a limited period of time.
March 09, 2015, 06:51:01 PM
If you have hosting at Minersource and want to get out of there, you're also welcome to contact us. We've gotten a few SP3Xs from Minersource over the last few months, including a few after their website went down. I don't know if shipments will continue, but I hope so. I've been thinking about making a trip down to Denver to visit a friend, so there's a chance I might be able to pick some miners up from Minersource as well.
Update from one of our customers: While they were able to get some of their miners shipped from Minersource to us a few weeks ago, their subsequent attempts to get their last 4 SP30s out of Minersource have not been successful yet, after one week of attempted contact.
*Ominous music plays in the background*
I used to do a fair amount of business with minersource, have had exactly one email conversation with Carson in the last month, over the course of about two hours on the 12th. No responses to any inquiries since then. Not terribly encouraging as they'd previously been talking about sending a lot of work our way, and we were already preparing for the jobs before they went dark. Just throwing that out there.
Would contacting the Colorado State Attorney help?
If you want the kids full bio report as well as his partner in crime, I can provide all of that for you. I went to college with these nut jobs before they decided to take a year off to pursue this failure of a shit scamming spree.
March 09, 2015, 06:49:13 PM
Hi everyone,
Has someone played with the serial port on the Spondoolies machine? I'm trying to connect to my SP20 using a serial cable and would like the pinout diagram of the RJ12 plug...
Thank you!
Has someone played with the serial port on the Spondoolies machine? I'm trying to connect to my SP20 using a serial cable and would like the pinout diagram of the RJ12 plug...
Thank you!
March 09, 2015, 06:21:49 PM
I will be looking forward to next-gen hardware from SP-Tech 
Is there an ETA as to when preorders/shipments are offered for the next-gen hardware?
Last year, they said they would not be doing preorders for their 3rd generation of hardware (Pickaxe ASIC). They'll announce availability when it's available. Is there an ETA as to when preorders/shipments are offered for the next-gen hardware? March 09, 2015, 03:55:20 PM
I will be looking forward to next-gen hardware from SP-Tech Is there an ETA as to when preorders/shipments are offered for the next-gen hardware?
Is there an ETA as to when preorders/shipments are offered for the next-gen hardware? March 09, 2015, 03:26:20 PM
Got the SP31s today. I am running them on basic voltage settings of slow fans, medium rates. I would like to set them up so that I am hashing at about 3000 gh. Can someone kindly walk me though the menu settings? I am thinking that I'll have to adjust via advanced voltage settings. I've made some minor changes but see no hash rate changes. Thanks very much.
Set the initial voltages and max voltage to something around 0.620. Set the fan speed to something around 40 or to Auto. Higher voltage will mean higher hashrate, higher power consumption, and lower efficiency.
Usually, if you use Auto fans, you want to set the initial voltage to something lower than the max voltage, because otherwise some of the ASICs might start to overheat before the proper fan speed gets learned properly. However, at voltages near or below 0.620 V, some ASICs will start to fail, and if you start them at a lower voltage they will be more likely to fail than if you start them at the final voltage.
March 09, 2015, 01:38:52 PM
Got the SP31s today. I am running them on basic voltage settings of slow fans, medium rates. I would like to set them up so that I am hashing at about 3000 gh. Can someone kindly walk me though the menu settings? I am thinking that I'll have to adjust via advanced voltage settings. I've made some minor changes but see no hash rate changes. Thanks very much.
quote author=Biodom link=topic=521520.msg10668522#msg10668522 date=1425564734]
Underclocking SP30 courtesy of Tigggger:
https://bitcointalksearch.org/topic/m.10657999
[/quote]
quote author=Biodom link=topic=521520.msg10668522#msg10668522 date=1425564734]
There is an unofficial thread for the SP20s. At this time, I am looking at underclocking my SP30;
Currently pulling 3KW and 4.5T
Does anyone of the top of their heads have the best settings for a SP30 for the best hash/watt/fan rate?
Currently pulling 3KW and 4.5T
Does anyone of the top of their heads have the best settings for a SP30 for the best hash/watt/fan rate?
Underclocking SP30 courtesy of Tigggger:
https://bitcointalksearch.org/topic/m.10657999
[/quote]
March 09, 2015, 07:55:02 AM
Hello to all.
I need help to recover a SP20.
problem happens when i downgrade from 2.6.14 to 2.5.12 with firmware list from web management. After the downgrade machine shows it is a SP10, having web access, but not mining. I did a factory reset and have not more access to the unit.
So I tried a recovery with SDcard. I got xmas lights , but problem remain. 4 times or more.
I can get web and ssh acces to the machine with SDboot, but want to recover internal memory.
It looks that something internally is saying the machine is a SP10 , but doesnt know how to change it.
here is something similar:
http://www.spondoolies-tech.com/blogs/technical-blog/16218032-recover-sp10-that-has-image-2-x-x
but i am not sure if this is the same that my situation and what the instructions to fix it have to be implemented.
I write to support, but I get tired after one week waiting for a solution from them. Not much happy with support.
thanks
I need help to recover a SP20.
problem happens when i downgrade from 2.6.14 to 2.5.12 with firmware list from web management. After the downgrade machine shows it is a SP10, having web access, but not mining. I did a factory reset and have not more access to the unit.
So I tried a recovery with SDcard. I got xmas lights , but problem remain. 4 times or more.
I can get web and ssh acces to the machine with SDboot, but want to recover internal memory.
It looks that something internally is saying the machine is a SP10 , but doesnt know how to change it.
here is something similar:
http://www.spondoolies-tech.com/blogs/technical-blog/16218032-recover-sp10-that-has-image-2-x-x
but i am not sure if this is the same that my situation and what the instructions to fix it have to be implemented.
I write to support, but I get tired after one week waiting for a solution from them. Not much happy with support.
thanks
Did the same thing when I first got one of my SP20 units. It takes a while after you get the xmas lights. Just let it go about 5 minutes. After that, immediately flash with new firmware. Be sure to use the recovery and not boot SD. Worst case scenario, SP-T will remote with you to get it going again.
March 09, 2015, 07:46:22 AM
If you have hosting at Minersource and want to get out of there, you're also welcome to contact us. We've gotten a few SP3Xs from Minersource over the last few months, including a few after their website went down. I don't know if shipments will continue, but I hope so. I've been thinking about making a trip down to Denver to visit a friend, so there's a chance I might be able to pick some miners up from Minersource as well.
Update from one of our customers: While they were able to get some of their miners shipped from Minersource to us a few weeks ago, their subsequent attempts to get their last 4 SP30s out of Minersource have not been successful yet, after one week of attempted contact.
*Ominous music plays in the background*
I used to do a fair amount of business with minersource, have had exactly one email conversation with Carson in the last month, over the course of about two hours on the 12th. No responses to any inquiries since then. Not terribly encouraging as they'd previously been talking about sending a lot of work our way, and we were already preparing for the jobs before they went dark. Just throwing that out there.
Would contacting the Colorado State Attorney help?
What good would that do?
March 09, 2015, 07:41:34 AM
Hello to all.
I need help to recover a SP20.
problem happens when i downgrade from 2.6.14 to 2.5.12 with firmware list from web management. After the downgrade machine shows it is a SP10, having web access, but not mining. I did a factory reset and have not more access to the unit.
So I tried a recovery with SDcard. I got xmas lights , but problem remain. 4 times or more.
I can get web and ssh acces to the machine with SDboot, but want to recover internal memory.
It looks that something internally is saying the machine is a SP10 , but doesnt know how to change it.
here is something similar:
http://www.spondoolies-tech.com/blogs/technical-blog/16218032-recover-sp10-that-has-image-2-x-x
but i am not sure if this is the same that my situation and what the instructions to fix it have to be implemented.
I write to support, but I get tired after one week waiting for a solution from them. Not much happy with support.
thanks
I need help to recover a SP20.
problem happens when i downgrade from 2.6.14 to 2.5.12 with firmware list from web management. After the downgrade machine shows it is a SP10, having web access, but not mining. I did a factory reset and have not more access to the unit.
So I tried a recovery with SDcard. I got xmas lights , but problem remain. 4 times or more.
I can get web and ssh acces to the machine with SDboot, but want to recover internal memory.
It looks that something internally is saying the machine is a SP10 , but doesnt know how to change it.
here is something similar:
http://www.spondoolies-tech.com/blogs/technical-blog/16218032-recover-sp10-that-has-image-2-x-x
but i am not sure if this is the same that my situation and what the instructions to fix it have to be implemented.
I write to support, but I get tired after one week waiting for a solution from them. Not much happy with support.
thanks
Email remo@sp
March 09, 2015, 06:51:03 AM
I know this is not a bitmain thread, but S5 batches 5 and 6 up now ... last production run shipping Mar 30th & June 9th
kind of lonely without sp20 on the market...
March 09, 2015, 06:40:19 AM
I know this is not a bitmain thread, but S5 batches 5 and 6 up now ... last production run shipping Mar 30th & June 9th
March 09, 2015, 06:10:13 AM
Hello to all.
I need help to recover a SP20.
problem happens when i downgrade from 2.6.14 to 2.5.12 with firmware list from web management. After the downgrade machine shows it is a SP10, having web access, but not mining. I did a factory reset and have not more access to the unit.
So I tried a recovery with SDcard. I got xmas lights , but problem remain. 4 times or more.
I can get web and ssh acces to the machine with SDboot, but want to recover internal memory.
It looks that something internally is saying the machine is a SP10 , but doesnt know how to change it.
here is something similar:
http://www.spondoolies-tech.com/blogs/technical-blog/16218032-recover-sp10-that-has-image-2-x-x
but i am not sure if this is the same that my situation and what the instructions to fix it have to be implemented.
I write to support, but I get tired after one week waiting for a solution from them. Not much happy with support.
thanks
I need help to recover a SP20.
problem happens when i downgrade from 2.6.14 to 2.5.12 with firmware list from web management. After the downgrade machine shows it is a SP10, having web access, but not mining. I did a factory reset and have not more access to the unit.
So I tried a recovery with SDcard. I got xmas lights , but problem remain. 4 times or more.
I can get web and ssh acces to the machine with SDboot, but want to recover internal memory.
It looks that something internally is saying the machine is a SP10 , but doesnt know how to change it.
here is something similar:
http://www.spondoolies-tech.com/blogs/technical-blog/16218032-recover-sp10-that-has-image-2-x-x
but i am not sure if this is the same that my situation and what the instructions to fix it have to be implemented.
I write to support, but I get tired after one week waiting for a solution from them. Not much happy with support.
thanks
March 09, 2015, 01:15:08 AM
If you have hosting at Minersource and want to get out of there, you're also welcome to contact us. We've gotten a few SP3Xs from Minersource over the last few months, including a few after their website went down. I don't know if shipments will continue, but I hope so. I've been thinking about making a trip down to Denver to visit a friend, so there's a chance I might be able to pick some miners up from Minersource as well.
Update from one of our customers: While they were able to get some of their miners shipped from Minersource to us a few weeks ago, their subsequent attempts to get their last 4 SP30s out of Minersource have not been successful yet, after one week of attempted contact.
*Ominous music plays in the background*
I used to do a fair amount of business with minersource, have had exactly one email conversation with Carson in the last month, over the course of about two hours on the 12th. No responses to any inquiries since then. Not terribly encouraging as they'd previously been talking about sending a lot of work our way, and we were already preparing for the jobs before they went dark. Just throwing that out there.
Would contacting the Colorado State Attorney help?
March 08, 2015, 10:08:44 PM
If you have hosting at Minersource and want to get out of there, you're also welcome to contact us. We've gotten a few SP3Xs from Minersource over the last few months, including a few after their website went down. I don't know if shipments will continue, but I hope so. I've been thinking about making a trip down to Denver to visit a friend, so there's a chance I might be able to pick some miners up from Minersource as well.
Update from one of our customers: While they were able to get some of their miners shipped from Minersource to us a few weeks ago, their subsequent attempts to get their last 4 SP30s out of Minersource have not been successful yet, after one week of attempted contact.
*Ominous music plays in the background*
I used to do a fair amount of business with minersource, have had exactly one email conversation with Carson in the last month, over the course of about two hours on the 12th. No responses to any inquiries since then. Not terribly encouraging as they'd previously been talking about sending a lot of work our way, and we were already preparing for the jobs before they went dark. Just throwing that out there.
March 08, 2015, 09:44:24 PM
SP30 with the 'boot SD' has crapped out again!! (restarting every 3 minutes with zero mining) (last SP20 is 'fine')
multiple 'SD recoveries' failed to help
multiple 'SD boot' attempts fail to help
(SP20E offline 10 days)
I have similar issue...multiple 'SD recoveries' failed to help
multiple 'SD boot' attempts fail to help
(SP20E offline 10 days)
Try sd boot first, but patiently wait for at least 10 minutes to see if miner boot.
If not, try to put sd card on working sp20, then wait (must be self reboot and start booting)
If not shut them down for at least 5 min and then with inserted SD Recovery wait again at least 10 minutes to get xmas light mode, then wait not 2min as is said in instruction, but wait 10/15 minutes, remove sd and power down.
I found all this when i try to recover 2 sp20e after power faliure, first one was fixed with sd recovery, but second one work only with sd boot(seems like his own memory is dead)
Good luck!
Thanks loudnes, but still no joy on the SP30.
2nd day of failed recoveries and i think its not coming back.
SP-T mentioned the MMC board possibly needing replacing.
If they havent yet sent my ribbons & connector headers, perhaps they can send an SP30 board at the same time.
4.06PM
Dear 'Edgar',
Today we are shipping to you some spare parts with DHL.
Please see attached shipping documents
Best Regards,
Katya Penkar
Invoice shows 4 x 6 pin connector headers only.
No mention of ribbons nor SP30 MMC board...
Jump to: