[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 200.

HerbPean

legendary

Activity: 1638

Merit: 1005

Bought two SP20, very happy with them !

I run the fan speed at 20% on both units. The problem is => I have one of the unit that is having a "Resonating Wave" sound at 20% speed. I know it's bad luck. Is anyone else experimented the same thing with a unit ? It's like going on a medium-high pitch every 2 second or so ... "wouuuuuuuuuuuuangggggg ....... wouuuuuuuuuuuuuuang" (<= hahahah nice try isn't Tongue

)

I tried to use foam just to try to block the wave with no luck.

I can ALMOST get rid of it if i play with my hand and the airflow.

I guess if i could run it at 21% or 22% i might get rid of it.

This is soooooooooo unlucky Tongue

Thanks !

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Thanks again everyone for the suggestions - but I tried absolutely everything suggested. I've now completed an SD Recovery on both units and they are again working as before. It really is the strangest thing - but I'm happy I got them back. I could understand if it happened to just the one, but both? Strange stuff.

I'll think twice before switching them off again though...... Cheesy

Peace

Duce

full member

Activity: 175

Merit: 100

I throw this out there, did you just try a computer and a switch connected to them? You know just configure the NIC on the computer to see if you can get them on a standalone situation. Interested to find out what happened.

sjc1490

hero member

Activity: 546

Merit: 500

Quote from: nhminer on January 08, 2015, 01:55:13 PM

Quote from: PatMan on January 08, 2015, 01:38:24 PM

Quote from: Biodom on January 08, 2015, 01:12:52 PM

When I switch off my SP20, they come back in 5-10 min. First time I thought that they went dead too. Did you wait that long?

Yeah, they've been on for about 80 minutes now......

Quote from: notlist3d on January 08, 2015, 01:16:55 PM

Are you able to see them on "http://myminer.io/" ? If working properly they should nicely be showing there. If truly nothing finds them there is always recovery through SD image.

Nope - nothing.....

Well, thanks for the suggestions guys, it's appreciated - but I've resigned myself to the fact that I've got to do a SD recovery on them I'm afraid Sad

Wish I knew what caused it though...... Huh

can you ping them?
can you SSH to them?

I had basically the same problem with all 4 of mine. For some reason they didn't like my DHCP server (Sonicwall NSA 2400) using the 10. network config. I had to plug them into a cheap netgear cable modem and then log into them and then static them a 10. address. If you know the mac you could try to arp it with the -s command and set your ip and then see if you could reach it.

alh

legendary

Activity: 1846

Merit: 1052

Quote from: PatMan on January 08, 2015, 01:38:24 PM

Quote from: Biodom on January 08, 2015, 01:12:52 PM

When I switch off my SP20, they come back in 5-10 min. First time I thought that they went dead too. Did you wait that long?

Yeah, they've been on for about 80 minutes now......

Quote from: notlist3d on January 08, 2015, 01:16:55 PM

Are you able to see them on "http://myminer.io/" ? If working properly they should nicely be showing there. If truly nothing finds them there is always recovery through SD image.

Nope - nothing.....

Well, thanks for the suggestions guys, it's appreciated - but I've resigned myself to the fact that I've got to do a SD recovery on them I'm afraid Sad

Wish I knew what caused it though...... Huh

What else got turned off as a result of the electrical work? Any chance that the DHCP server got messed up in some way, and the SP20's now have a conflicting IP address with something else? Depending on how difficult it is to power off other stuff and your DHCP server, you might might be able to narrow the problem by getting it down to only the DNCH box and the SP20's. I know that IP conflicts can be a real bitch to debug.

Another idea. Remove the config from the DHCP server that tries to assign them a specific IP address. Hard reboot the SP20's, and see if they won't get some IP address that is on your network. In other words don't try and make them the way you want right out of the box. Instead, see if you can't get them back on your network and visible agqain. You might also want to try all this rebooting and such with just 1 SP20 for debugging purposes. Add the 2nd one once you get one visible and kinda working.

Best of luck.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: PatMan on January 08, 2015, 01:38:24 PM

Quote from: Biodom on January 08, 2015, 01:12:52 PM

When I switch off my SP20, they come back in 5-10 min. First time I thought that they went dead too. Did you wait that long?

Yeah, they've been on for about 80 minutes now......

Quote from: notlist3d on January 08, 2015, 01:16:55 PM

Are you able to see them on "http://myminer.io/" ? If working properly they should nicely be showing there. If truly nothing finds them there is always recovery through SD image.

Nope - nothing.....

Well, thanks for the suggestions guys, it's appreciated - but I've resigned myself to the fact that I've got to do a SD recovery on them I'm afraid Sad

Wish I knew what caused it though...... Huh

The last silly suggestion: ethernet connectors. Ethernet jacks on my machines do not "click in" well and cables keep getting loose.

Suggestion to Spondoolies: it just doesn't feel right to switch off machine that is hashing hard by throwing the PSU switch off. Do we switch computers off by yanking power cord-not typically, I would think. What would be a milder procedure to switch off SP20? Would stopping CGminer first in software before throwing the PSU switch be possibly better? Some kind of shutdown command would be nice to have. Maybe it is already there? thanks.

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Quote from: nhminer on January 08, 2015, 01:55:13 PM

can you ping them?
can you SSH to them?

No & No. Nada.

Quote from: MrTeal on January 08, 2015, 01:57:30 PM

If you have an FTDI cable, do you get anything out UART0?

No, I don't I'm afraid. Thanks though MrTeal.

I'm doing a recovery on the first one now, will keep ya'll informed. Wink

DiCE1904

legendary

Activity: 1118

Merit: 1002

Do i have to change something for them to show up on "http://myminer.io/"" ?

Thanks

MrTeal

legendary

Activity: 1274

Merit: 1004

If you have an FTDI cable, do you get anything out UART0?

nhminer

sr. member

Activity: 473

Merit: 250

Quote from: PatMan on January 08, 2015, 01:38:24 PM

Quote from: Biodom on January 08, 2015, 01:12:52 PM

When I switch off my SP20, they come back in 5-10 min. First time I thought that they went dead too. Did you wait that long?

Yeah, they've been on for about 80 minutes now......

Quote from: notlist3d on January 08, 2015, 01:16:55 PM

Are you able to see them on "http://myminer.io/" ? If working properly they should nicely be showing there. If truly nothing finds them there is always recovery through SD image.

Nope - nothing.....

Well, thanks for the suggestions guys, it's appreciated - but I've resigned myself to the fact that I've got to do a SD recovery on them I'm afraid Sad

Wish I knew what caused it though...... Huh

can you ping them?
can you SSH to them?

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Quote from: Biodom on January 08, 2015, 01:12:52 PM

When I switch off my SP20, they come back in 5-10 min. First time I thought that they went dead too. Did you wait that long?

Yeah, they've been on for about 80 minutes now......

Quote from: notlist3d on January 08, 2015, 01:16:55 PM

Are you able to see them on "http://myminer.io/" ? If working properly they should nicely be showing there. If truly nothing finds them there is always recovery through SD image.

Nope - nothing.....

Well, thanks for the suggestions guys, it's appreciated - but I've resigned myself to the fact that I've got to do a SD recovery on them I'm afraid Sad

Wish I knew what caused it though...... Huh

Ski72

member

Activity: 84

Merit: 10

Kinex - The New Frontier

Quote from: klondike_bar on January 08, 2015, 12:50:11 PM

Quote from: Epoch on January 08, 2015, 08:48:39 AM

Quote from: raskul on January 08, 2015, 07:39:40 AM

happy with the miner reporting on pools. this one is guild. showing very accurate
top - sp35

If you don't mind sharing, what settings did you end up using for your SP35? Start/max voltage, fan speed, PSU power limits ... and what does your unit read as its input voltage?

6TH seems abnormal for an SP35 - that is roughly a 3800-4000W DC12V draw, and the SP35 contains a pair of PSUs that are rated to give only 1600W DC each, for about 5.5TH/3200W (~3550W at wall). would love to know more, because if it can actually drive itself to 6TH i want some to go alonside my SP31 units (limited to 4.68TH at 208V)

I'm curious as well ...

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: PatMan on January 08, 2015, 12:24:19 PM

Hi guys,

Bit of a problem - I have 2 x SP20E's that have been running the latest firmware without issue. I had to switch all my stuff off while an electrician was doing some upgrade work, but when I switched everything back on again the two SP20's were nowhere to be seen. My router doesn't see them, IPscanner doesn't see them & I can't ping them. The fans are running but they're not hashing, the ethernet LED's are flashing like they're working - but they seem to have completely disappeared off my network. It's like they've "forgotten" everything. I also had my router set to reserve an IP address for them, which worked perfectly up until now.

This is the first time I've had to turn them off with this firmware installed - could it be a bug?

Any suggestions will be gratefully received......

Are you able to see them on "http://myminer.io/" ? If working properly they should nicely be showing there. If truly nothing finds them there is always recovery through SD image.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: PatMan on January 08, 2015, 12:24:19 PM

Hi guys,

Bit of a problem - I have 2 x SP20E's that have been running the latest firmware without issue. I had to switch all my stuff off while an electrician was doing some upgrade work, but when I switched everything back on again the two SP20's were nowhere to be seen. My router doesn't see them, IPscanner doesn't see them & I can't ping them. The fans are running but they're not hashing, the ethernet LED's are flashing like they're working - but they seem to have completely disappeared off my network. It's like they've "forgotten" everything. I also had my router set to reserve an IP address for them, which worked perfectly up until now.

This is the first time I've had to turn them off with this firmware installed - could it be a bug?

Any suggestions will be gratefully received......

When I switch off my SP20, they come back in 5-10 min. First time I thought that they went dead too. Did you wait that long?
First time it happened, I refreshed the browser and went to myminer.io where i saw nothing initially, but it appeared after1-2 min (few minutes before hashing restarted). Maybe this (an attempt to reach myminer.io) helps to initiate the linkup again.

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: Epoch on January 08, 2015, 08:48:39 AM

Quote from: raskul on January 08, 2015, 07:39:40 AM

happy with the miner reporting on pools. this one is guild. showing very accurate
top - sp35

If you don't mind sharing, what settings did you end up using for your SP35? Start/max voltage, fan speed, PSU power limits ... and what does your unit read as its input voltage?

6TH seems abnormal for an SP35 - that is roughly a 3800-4000W DC12V draw, and the SP35 contains a pair of PSUs that are rated to give only 1600W DC each, for about 5.5TH/3200W (~3550W at wall). would love to know more, because if it can actually drive itself to 6TH i want some to go alonside my SP31 units (limited to 4.68TH at 208V)

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Quote from: Biffa on January 08, 2015, 12:43:38 PM

Quote from: PatMan on January 08, 2015, 12:34:26 PM

Quote from: RoadStress on January 08, 2015, 12:29:27 PM

Quote from: PatMan on January 08, 2015, 12:24:19 PM

Any suggestions will be gratefully received......

Try SD recovery card method, but maybe there is something else that you can do like hard reboot them a couple of times.

Hi RoadStress,

I've tried hard rebooting them a couple of times now (it's the only way I can, as I can't access the web UI anyway) but with the same result. I'd be interested to know if anyone else has had this problem with the new firmware though, I don't fancy having to do a full SD restore/recovery only to have it happen again the next time I have to power down. It does seem strange that it's happened to both of them.....

Which firmware was it? I'm up to the latest version but I haven't had a problem rebooting them, I also reserve an IP using their MAC address on my DHCP server.

The latest - I only upgraded them both yesterday, this is the first time I have powered them down with this firmware too......

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: PatMan on January 08, 2015, 12:34:26 PM

Quote from: RoadStress on January 08, 2015, 12:29:27 PM

Quote from: PatMan on January 08, 2015, 12:24:19 PM

Any suggestions will be gratefully received......

Try SD recovery card method, but maybe there is something else that you can do like hard reboot them a couple of times.

Hi RoadStress,

I've tried hard rebooting them a couple of times now (it's the only way I can, as I can't access the web UI anyway) but with the same result. I'd be interested to know if anyone else has had this problem with the new firmware though, I don't fancy having to do a full SD restore/recovery only to have it happen again the next time I have to power down. It does seem strange that it's happened to both of them.....

Which firmware was it? I'm up to the latest version but I haven't had a problem rebooting them, I also reserve an IP using their MAC address on my DHCP server.

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Quote from: RoadStress on January 08, 2015, 12:29:27 PM

Quote from: PatMan on January 08, 2015, 12:24:19 PM

Any suggestions will be gratefully received......

Try SD recovery card method, but maybe there is something else that you can do like hard reboot them a couple of times.

Hi RoadStress,

I've tried hard rebooting them a couple of times now (it's the only way I can, as I can't access the web UI anyway) but with the same result. I'd be interested to know if anyone else has had this problem with the new firmware though, I don't fancy having to do a full SD restore/recovery only to have it happen again the next time I have to power down. It does seem strange that it's happened to both of them.....

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: PatMan on January 08, 2015, 12:24:19 PM

Any suggestions will be gratefully received......

Try SD recovery card method, but maybe there is something else that you can do like hard reboot them a couple of times.

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Hi guys,

Bit of a problem - I have 2 x SP20E's that have been running the latest firmware without issue. I had to switch all my stuff off while an electrician was doing some upgrade work, but when I switched everything back on again the two SP20's were nowhere to be seen. My router doesn't see them, IPscanner doesn't see them & I can't ping them. The fans are running but they're not hashing, the ethernet LED's are flashing like they're working - but they seem to have completely disappeared off my network. It's like they've "forgotten" everything. I also had my router set to reserve an IP address for them, which worked perfectly up until now.

This is the first time I've had to turn them off with this firmware installed - could it be a bug?

Any suggestions will be gratefully received......

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 200. (Read 1260290 times)