[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 208.

jjiimm_64

legendary

Activity: 1876

Merit: 1000

Quote from: raskul on January 04, 2015, 09:46:31 AM

Quote from: edgar on January 04, 2015, 09:45:50 AM

i just had a check on my sp30 gui and it thinks its Jan 2 2000

and none of the graphs are running.

still on firmware version: 2.5.12 though

meh, let it mine, stop babysitting Cool

lol, y2k issue ?

stan258

sr. member

Activity: 440

Merit: 250

Problems with the SP 20 not responding after changing pools. In Chrome selecting the miners IP with /reboot so far has brought them all back to life after a few mins. Avoiding a hard power cycle if you are remote in. I have not tried this after updating firmware. I guess I will find out sooner rather then later.

edgar

legendary

Activity: 1848

Merit: 1001

no recommendations for .54 or .64?

wh00per

hero member

Activity: 572

Merit: 500

Quote from: raskul on January 04, 2015, 06:47:09 AM

yeah i presumed i could just run the full cgminer command line but it doesn't - it still takes it from the .conf
i may give the .conf change a bash when mmpool solves the next block
will let you know

You can always install a visual tool to copy/edit files over SSH. I'm using WinSCP, but it's not available on MAC.
http://www.megaleecher.net/Download_winscp_alternative_free_sftp_client_for_Mac_OS_X#axzz3NrmId8wD

wpgdeez

hero member

Activity: 728

Merit: 500

Quote from: edgar on January 04, 2015, 09:45:50 AM

i just had a check on my sp30 gui and it thinks its Jan 2 2000

and none of the graphs are running.

still on firmware version: 2.5.12 though

Same thing happened to my SP10, just had to give it a reboot and the correct date showed.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: edgar on January 04, 2015, 09:45:50 AM

i just had a check on my sp30 gui and it thinks its Jan 2 2000

and none of the graphs are running.

still on firmware version: 2.5.12 though

meh, let it mine, stop babysitting Cool

edgar

legendary

Activity: 1848

Merit: 1001

i just had a check on my sp30 gui and it thinks its Jan 2 2000

and none of the graphs are running.

still on firmware version: 2.5.12 though

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: raskul on January 04, 2015, 03:33:22 AM

Quote from: blg42598 on January 03, 2015, 11:38:29 PM

Do you guys know if I could use a usb WiFi adapter to connect to the internet instead of an ethernet cable for the miners? Thanks.

it's work in progress.

Better to use a WIFi to Ethernet Bridge. There are quite a few out there.

I use a Western Digital MyNet AC Bridge for one set of miners (it has 4 ethernet ports):
https://www.amazon.com/Bridge-4-Port-Gigabit-Speeds-Wireless/dp/B00A66WJWK/ref=as_sl_pc_ss_til?tag=jedislair-20&linkCode=w01&linkId=5VJGKSAZOUYEIU53&creativeASIN=B00A66WJWK

And a Netgear EX6200 AC wifi extender for another set of miners (5 ethernet ports):
https://www.amazon.com/NETGEAR-AC1200-Power-700mW-Extender/dp/B00HQ883QW/ref=as_sl_pc_ss_til?tag=jedislair-20&linkCode=w01&linkId=64PGYXMUEPQEOXGG&creativeASIN=B00HQ883QW

You can add a switch to a port if you have more than 4 or 5 miners at one location.

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: raskul on January 04, 2015, 07:12:40 AM

Code:

[code][quote author=Biffa link=topic=521520.msg10033328#msg10033328 date=1420373366]
[quote author=raskul link=topic=521520.msg10033145#msg10033145 date=1420372029]
[quote author=Biffa link=topic=521520.msg10033132#msg10033132 date=1420371907]
[quote author=raskul link=topic=521520.msg10032916#msg10032916 date=1420370318]
[quote author=edgar link=topic=521520.msg10032701#msg10032701 date=1420368651]
[quote author=raskul link=topic=521520.msg10032627#msg10032627 date=1420368188]
[quote author=Powell link=topic=521520.msg10025188#msg10025188 date=1420310734]
Is this one of the SP20's at your house?  It looks like it will need the SD recovery.  If the actual mnt path is gone like wh00per stated earlier it seems to have owned that part of the system.  I can't remember the exact fsck command for this version of *nix.  Even then I think it will be a lot more of a pain to do vs running the SD recovery.
[/quote]

update:

I have successfully applied the recover from sd card (got christmas lights)

restarted the miner and it starts mining correctly itself now (no need to ./cgminer in ssh)
but still no GUI

it's mining on slush, I can see the worker hashrate OK on slush website

puzzling situation, not having GUI isn't a severe issue, I am happy to leave the miner at slush,
just annoying. I blame the dead S5.
[/quote]

i had the same issue with my first sp20, never got the xmas tree lights and it took 3 attempts at sd recover but finally came back.

weird bcoz sp30 sd recover worked 1st time, with alt-xmas lights...


at least its hashing away, let us know your 24hr avg on slush as & when.


[/quote]

all seems well. I may go back to it and try sd recovery again - maybe tomorrow

after managing to run cgminer manually, i babysat it last night so it's been going ~24hrs



i've never had to babysit an SP-Tech miner but having no GUI isn't a big problem, happy to have it on slush for variance, it just means i can't put it back to mmpool (pool now at 300TH  ;D ) via pool options in GUI to ramp up shares on new block round start - i like to fire all 10TH to mmpool early in a round to keep my earnings up.

anyway - ho-hum... i'll do another sdrecovery maybe tomorrow and report back. It's my turn to cook family dinner so i'm concentrating on that today, got the old folks coming round later.

[/quote]

You should be able to modify the pools by editing the cgminer config file.

SSH to log in to your miner, and then use: vi /etc/cgminer.conf.template


[/quote]

yeah i presumed i could just run the full cgminer command line but it doesn't - it still takes it from the .conf
i may give the .conf change a bash when mmpool solves the next block
will let you know
[/quote]

For an easier life you can also use winscp to edit the files
[/quote]

cheers, i've mucked about building p2pool nodes and putting nodes up for altcoins in the past so i should remember the basics of how to edit in terminal or putty but i'll keep it in mind.[/code]

My bad, thought was talking to edgar Tongue

(just kidding edgar)

raskul

sr. member

Activity: 434

Merit: 250

Code:

[code][quote author=Biffa link=topic=521520.msg10033328#msg10033328 date=1420373366]
[quote author=raskul link=topic=521520.msg10033145#msg10033145 date=1420372029]
[quote author=Biffa link=topic=521520.msg10033132#msg10033132 date=1420371907]
[quote author=raskul link=topic=521520.msg10032916#msg10032916 date=1420370318]
[quote author=edgar link=topic=521520.msg10032701#msg10032701 date=1420368651]
[quote author=raskul link=topic=521520.msg10032627#msg10032627 date=1420368188]
[quote author=Powell link=topic=521520.msg10025188#msg10025188 date=1420310734]
Is this one of the SP20's at your house?  It looks like it will need the SD recovery.  If the actual mnt path is gone like wh00per stated earlier it seems to have owned that part of the system.  I can't remember the exact fsck command for this version of *nix.  Even then I think it will be a lot more of a pain to do vs running the SD recovery.
[/quote]

update:

I have successfully applied the recover from sd card (got christmas lights)

restarted the miner and it starts mining correctly itself now (no need to ./cgminer in ssh)
but still no GUI

it's mining on slush, I can see the worker hashrate OK on slush website

puzzling situation, not having GUI isn't a severe issue, I am happy to leave the miner at slush,
just annoying. I blame the dead S5.
[/quote]

i had the same issue with my first sp20, never got the xmas tree lights and it took 3 attempts at sd recover but finally came back.

weird bcoz sp30 sd recover worked 1st time, with alt-xmas lights...


at least its hashing away, let us know your 24hr avg on slush as & when.


[/quote]

all seems well. I may go back to it and try sd recovery again - maybe tomorrow

after managing to run cgminer manually, i babysat it last night so it's been going ~24hrs



i've never had to babysit an SP-Tech miner but having no GUI isn't a big problem, happy to have it on slush for variance, it just means i can't put it back to mmpool (pool now at 300TH  ;D ) via pool options in GUI to ramp up shares on new block round start - i like to fire all 10TH to mmpool early in a round to keep my earnings up.

anyway - ho-hum... i'll do another sdrecovery maybe tomorrow and report back. It's my turn to cook family dinner so i'm concentrating on that today, got the old folks coming round later.

[/quote]

You should be able to modify the pools by editing the cgminer config file.

SSH to log in to your miner, and then use: vi /etc/cgminer.conf.template


[/quote]

yeah i presumed i could just run the full cgminer command line but it doesn't - it still takes it from the .conf
i may give the .conf change a bash when mmpool solves the next block
will let you know
[/quote]

For an easier life you can also use winscp to edit the files
[/quote]

cheers, i've mucked about building p2pool nodes and putting nodes up for altcoins in the past so i should remember the basics of how to edit in terminal or putty but i'll keep it in mind.[/code]

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: raskul on January 04, 2015, 06:47:09 AM

Quote from: Biffa on January 04, 2015, 06:45:07 AM

Quote from: raskul on January 04, 2015, 06:18:38 AM

Quote from: ?? on ??

Quote from: raskul on January 04, 2015, 05:43:08 AM

Quote from: Powell on January 03, 2015, 01:45:34 PM

Is this one of the SP20's at your house? It looks like it will need the SD recovery. If the actual mnt path is gone like wh00per stated earlier it seems to have owned that part of the system. I can't remember the exact fsck command for this version of *nix. Even then I think it will be a lot more of a pain to do vs running the SD recovery.

update:

I have successfully applied the recover from sd card (got christmas lights)

restarted the miner and it starts mining correctly itself now (no need to ./cgminer in ssh)
but still no GUI

it's mining on slush, I can see the worker hashrate OK on slush website

puzzling situation, not having GUI isn't a severe issue, I am happy to leave the miner at slush,
just annoying. I blame the dead S5.

i had the same issue with my first sp20, never got the xmas tree lights and it took 3 attempts at sd recover but finally came back.

weird bcoz sp30 sd recover worked 1st time, with alt-xmas lights...

at least its hashing away, let us know your 24hr avg on slush as & when.

all seems well. I may go back to it and try sd recovery again - maybe tomorrow

after managing to run cgminer manually, i babysat it last night so it's been going ~24hrs

Code:

OK	912.9 Gh/s	raskulsp201	1.125 Th/s	1.092 Th/s	1.069 Th/s	1.304 Th/s

i've never had to babysit an SP-Tech miner but having no GUI isn't a big problem, happy to have it on slush for variance, it just means i can't put it back to mmpool (pool now at 300TH Grin

) via pool options in GUI to ramp up shares on new block round start - i like to fire all 10TH to mmpool early in a round to keep my earnings up.

anyway - ho-hum... i'll do another sdrecovery maybe tomorrow and report back. It's my turn to cook family dinner so i'm concentrating on that today, got the old folks coming round later.

You should be able to modify the pools by editing the cgminer config file.

SSH to log in to your miner, and then use: vi /etc/cgminer.conf.template

yeah i presumed i could just run the full cgminer command line but it doesn't - it still takes it from the .conf
i may give the .conf change a bash when mmpool solves the next block
will let you know

For an easier life you can also use an scp client to download/edit the files if vi isn't to your tastes, not sure what it would be on the mac

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Biffa on January 04, 2015, 06:45:07 AM

Quote from: raskul on January 04, 2015, 06:18:38 AM

Quote from: ?? on ??

Quote from: raskul on January 04, 2015, 05:43:08 AM

Quote from: Powell on January 03, 2015, 01:45:34 PM

Is this one of the SP20's at your house? It looks like it will need the SD recovery. If the actual mnt path is gone like wh00per stated earlier it seems to have owned that part of the system. I can't remember the exact fsck command for this version of *nix. Even then I think it will be a lot more of a pain to do vs running the SD recovery.

update:

I have successfully applied the recover from sd card (got christmas lights)

restarted the miner and it starts mining correctly itself now (no need to ./cgminer in ssh)
but still no GUI

it's mining on slush, I can see the worker hashrate OK on slush website

puzzling situation, not having GUI isn't a severe issue, I am happy to leave the miner at slush,
just annoying. I blame the dead S5.

i had the same issue with my first sp20, never got the xmas tree lights and it took 3 attempts at sd recover but finally came back.

weird bcoz sp30 sd recover worked 1st time, with alt-xmas lights...

at least its hashing away, let us know your 24hr avg on slush as & when.

all seems well. I may go back to it and try sd recovery again - maybe tomorrow

after managing to run cgminer manually, i babysat it last night so it's been going ~24hrs

Code:

OK	912.9 Gh/s	raskulsp201	1.125 Th/s	1.092 Th/s	1.069 Th/s	1.304 Th/s

i've never had to babysit an SP-Tech miner but having no GUI isn't a big problem, happy to have it on slush for variance, it just means i can't put it back to mmpool (pool now at 300TH Grin

) via pool options in GUI to ramp up shares on new block round start - i like to fire all 10TH to mmpool early in a round to keep my earnings up.

anyway - ho-hum... i'll do another sdrecovery maybe tomorrow and report back. It's my turn to cook family dinner so i'm concentrating on that today, got the old folks coming round later.

You should be able to modify the pools by editing the cgminer config file.

SSH to log in to your miner, and then use: vi /etc/cgminer.conf.template

yeah i presumed i could just run the full cgminer command line but it doesn't - it still takes it from the .conf
i may give the .conf change a bash when mmpool solves the next block
will let you know

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: raskul on January 04, 2015, 06:18:38 AM

Quote from: ?? on ??

Quote from: raskul on January 04, 2015, 05:43:08 AM

Quote from: Powell on January 03, 2015, 01:45:34 PM

Is this one of the SP20's at your house? It looks like it will need the SD recovery. If the actual mnt path is gone like wh00per stated earlier it seems to have owned that part of the system. I can't remember the exact fsck command for this version of *nix. Even then I think it will be a lot more of a pain to do vs running the SD recovery.

update:

I have successfully applied the recover from sd card (got christmas lights)

restarted the miner and it starts mining correctly itself now (no need to ./cgminer in ssh)
but still no GUI

it's mining on slush, I can see the worker hashrate OK on slush website

puzzling situation, not having GUI isn't a severe issue, I am happy to leave the miner at slush,
just annoying. I blame the dead S5.

i had the same issue with my first sp20, never got the xmas tree lights and it took 3 attempts at sd recover but finally came back.

weird bcoz sp30 sd recover worked 1st time, with alt-xmas lights...

at least its hashing away, let us know your 24hr avg on slush as & when.

all seems well. I may go back to it and try sd recovery again - maybe tomorrow

after managing to run cgminer manually, i babysat it last night so it's been going ~24hrs

Code:

OK	912.9 Gh/s	raskulsp201	1.125 Th/s	1.092 Th/s	1.069 Th/s	1.304 Th/s

i've never had to babysit an SP-Tech miner but having no GUI isn't a big problem, happy to have it on slush for variance, it just means i can't put it back to mmpool (pool now at 300TH Grin

) via pool options in GUI to ramp up shares on new block round start - i like to fire all 10TH to mmpool early in a round to keep my earnings up.

anyway - ho-hum... i'll do another sdrecovery maybe tomorrow and report back. It's my turn to cook family dinner so i'm concentrating on that today, got the old folks coming round later.

You should be able to modify the pools by editing the cgminer config file.

SSH to log in to your miner, and then use: vi /etc/cgminer.conf.template

raskul

sr. member

Activity: 434

Merit: 250

Quote from: ?? on ??

Quote from: raskul on January 04, 2015, 05:43:08 AM

Quote from: Powell on January 03, 2015, 01:45:34 PM

Is this one of the SP20's at your house? It looks like it will need the SD recovery. If the actual mnt path is gone like wh00per stated earlier it seems to have owned that part of the system. I can't remember the exact fsck command for this version of *nix. Even then I think it will be a lot more of a pain to do vs running the SD recovery.

update:

I have successfully applied the recover from sd card (got christmas lights)

restarted the miner and it starts mining correctly itself now (no need to ./cgminer in ssh)
but still no GUI

it's mining on slush, I can see the worker hashrate OK on slush website

puzzling situation, not having GUI isn't a severe issue, I am happy to leave the miner at slush,
just annoying. I blame the dead S5.

i had the same issue with my first sp20, never got the xmas tree lights and it took 3 attempts at sd recover but finally came back.

weird bcoz sp30 sd recover worked 1st time, with alt-xmas lights...

at least its hashing away, let us know your 24hr avg on slush as & when.

all seems well. I may go back to it and try sd recovery again - maybe tomorrow

after managing to run cgminer manually, i babysat it last night so it's been going ~24hrs

Code:

OK	912.9 Gh/s	raskulsp201	1.125 Th/s	1.092 Th/s	1.069 Th/s	1.304 Th/s

i've never had to babysit an SP-Tech miner but having no GUI isn't a big problem, happy to have it on slush for variance, it just means i can't put it back to mmpool (pool now at 300TH Grin

) via pool options in GUI to ramp up shares on new block round start - i like to fire all 10TH to mmpool early in a round to keep my earnings up.

anyway - ho-hum... i'll do another sdrecovery maybe tomorrow and report back. It's my turn to cook family dinner so i'm concentrating on that today, got the old folks coming round later.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Powell on January 03, 2015, 01:45:34 PM

Is this one of the SP20's at your house? It looks like it will need the SD recovery. If the actual mnt path is gone like wh00per stated earlier it seems to have owned that part of the system. I can't remember the exact fsck command for this version of *nix. Even then I think it will be a lot more of a pain to do vs running the SD recovery.

update:

I have successfully applied the recover from sd card (got christmas lights)

restarted the miner and it starts mining correctly itself now (no need to ./cgminer in ssh)
but still no GUI

it's mining on slush, I can see the worker hashrate OK on slush website

puzzling situation, not having GUI isn't a severe issue, I am happy to leave the miner at slush,
just annoying. I blame the dead S5.

zvisha

hero member

Activity: 560

Merit: 500

Quote from: Xian01 on January 02, 2015, 08:27:38 PM

Any ideas how to change the hostname on SP20's and having it stick after a reboot ?

Tried "hostname name" and "vi /etc/hostname" and neither of 'em stick Sad

Also, just got my two GB units in, and can't seem to break 1.55TH/s using Antec 1300's with the default settings of the SP20E

Any suggestions on what I might be able to do, to get 'em running closer to 1.7TH/s ?

Look at /etc/init.d/S30hostname
"default settings of the SP20E" - check that the wattage limit on each loop is 288, and that the input air is as cold as possible. ~~1.55TH sounds a bit low (especially for 2 units), but possible~~. For intake of 33C that is reasonable result.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: blg42598 on January 03, 2015, 11:38:29 PM

Do you guys know if I could use a usb WiFi adapter to connect to the internet instead of an ethernet cable for the miners? Thanks.

it's work in progress.

TracerX

hero member

Activity: 918

Merit: 1002

Quote from: Duce on January 03, 2015, 11:43:05 PM

Quote from: TracerX on January 03, 2015, 11:33:54 PM

Quote from: Duce on January 03, 2015, 11:32:37 PM

Bottom line though, it does not matter as I do not see any difference in operation form my units, just curious now that I see you do not have any either.

I'm under the impression he was being sarcastic....

Oh no, I know he was and I am by no means knocking my SP20 units. I am really curious now what are the differences between the type of errors. I dug around before but could not find any information about the main page errors.

Right on, I wasn't trying to be an ass. I should have thrown a ;-) in there to be safe--carry on!

Duce

full member

Activity: 175

Merit: 100

Quote from: blg42598 on January 03, 2015, 11:38:29 PM

Do you guys know if I could use a usb WiFi adapter to connect to the internet instead of an ethernet cable for the miners? Thanks.

There was talk about WiFi to ethernet adapters before https://bitcointalksearch.org/topic/m.9775877. Reading this it sounds like the hardware will not recognize a USB WiFi adapter at this time.

Duce

full member

Activity: 175

Merit: 100

Quote from: TracerX on January 03, 2015, 11:33:54 PM

Quote from: Duce on January 03, 2015, 11:32:37 PM

Bottom line though, it does not matter as I do not see any difference in operation form my units, just curious now that I see you do not have any either.

I'm under the impression he was being sarcastic....

Oh no, I know he was and I am by no means knocking my SP20 units. I am really curious now what are the differences between the type of errors. I dug around before but could not find any information about the main page errors.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 208. (Read 1260290 times)