[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 228.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Biffa on December 22, 2014, 07:14:22 PM

Quote from: raskul on December 22, 2014, 07:07:27 PM

Quote from: Biffa on December 22, 2014, 07:04:49 PM

Quote from: raskul on December 22, 2014, 06:47:18 PM

Quote from: RoadStress on December 22, 2014, 06:45:25 PM

Quote from: raskul on December 22, 2014, 06:01:17 PM

you've been hiding RS.

any new GB forthcoming?

I've been relaxin' Cool

Now that BITMAIN dropped their S5 price I would like to surprise them with a nice and stingy GB offer. In talks right now.

this pleases me immensely Grin

Me too, if it doesn't come too soon... just in the final throes of my consolidation period. Give me a week or so to build up some coin. Cheesy

where were you when we were all renting out to paycoin? Cheesy

Right there with you, its probably halved the amount of time it would normally take to reach my savings target

But I am strict with myself *ooh* Shocked

once I have my saving stashed away in the cold wallet I'm then earning to buy. But if difficulty stays flat or negative I may not need to, so may bank again for the first time ever Cheesy

(yes I saw the spike just now)

Part of that is BMT S5 testing... so that spike is what you can expect to hit just after next difficulty- that is, if they ever open sales. Roll Eyes

effing self-mining.. let's see how long they keep them on for eh?
Their 'pet' dogie seems to be avoiding the question.

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: raskul on December 22, 2014, 07:07:27 PM

Quote from: Biffa on December 22, 2014, 07:04:49 PM

Quote from: raskul on December 22, 2014, 06:47:18 PM

Quote from: RoadStress on December 22, 2014, 06:45:25 PM

Quote from: raskul on December 22, 2014, 06:01:17 PM

you've been hiding RS.

any new GB forthcoming?

I've been relaxin' Cool

Now that BITMAIN dropped their S5 price I would like to surprise them with a nice and stingy GB offer. In talks right now.

this pleases me immensely Grin

Me too, if it doesn't come too soon... just in the final throes of my consolidation period. Give me a week or so to build up some coin. Cheesy

where were you when we were all renting out to paycoin? Cheesy

Right there with you, its probably halved the amount of time it would normally take to reach my savings target

But I am strict with myself *ooh* Shocked

once I have my saving stashed away in the cold wallet I'm then earning to buy. But if difficulty stays flat or negative I may not need to, so may bank again for the first time ever Cheesy

(yes I saw the spike just now)

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Biffa on December 22, 2014, 07:04:49 PM

Quote from: raskul on December 22, 2014, 06:47:18 PM

Quote from: RoadStress on December 22, 2014, 06:45:25 PM

Quote from: raskul on December 22, 2014, 06:01:17 PM

you've been hiding RS.

any new GB forthcoming?

I've been relaxin' Cool

Now that BITMAIN dropped their S5 price I would like to surprise them with a nice and stingy GB offer. In talks right now.

this pleases me immensely Grin

Me too, if it doesn't come too soon... just in the final throes of my consolidation period. Give me a week or so to build up some coin. Cheesy

where were you when we were all renting out to paycoin? Cheesy

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: raskul on December 22, 2014, 06:47:18 PM

Quote from: RoadStress on December 22, 2014, 06:45:25 PM

Quote from: raskul on December 22, 2014, 06:01:17 PM

you've been hiding RS.

any new GB forthcoming?

I've been relaxin' Cool

Now that BITMAIN dropped their S5 price I would like to surprise them with a nice and stingy GB offer. In talks right now.

this pleases me immensely Grin

Me too, if it doesn't come too soon... just in the final throes of my consolidation period. Give me a week or so to build up some coin. Cheesy

raskul

sr. member

Activity: 434

Merit: 250

Quote from: RoadStress on December 22, 2014, 06:45:25 PM

Quote from: raskul on December 22, 2014, 06:01:17 PM

you've been hiding RS.

any new GB forthcoming?

I've been relaxin' Cool

Now that BITMAIN dropped their S5 price I would like to surprise them with a nice and stingy GB offer. In talks right now.

this pleases me immensely Grin

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: raskul on December 22, 2014, 06:01:17 PM

you've been hiding RS.

any new GB forthcoming?

I've been relaxin' Cool

Now that BITMAIN dropped their S5 price I would like to surprise them with a nice and stingy GB offer. In talks right now.

raskul

sr. member

Activity: 434

Merit: 250

you've been hiding RS.

any new GB forthcoming?

RoadStress

legendary

Activity: 1904

Merit: 1007

Happy 500 pages SP-Tech!

RoadStress

legendary

Activity: 1904

Merit: 1007

Well I missed the 500 page congratulation post, but that doesn't mean I will not congratulate Spondoolies Tech. But first a small "let's remember" moment:

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Biodom on December 22, 2014, 12:43:15 PM

Quote from: raskul on December 22, 2014, 11:48:48 AM

finally found a few hours to tinker with the miners i have at home

note: these values are not metered at the wall, as I do not have a meter to test exactly... so w/gh is estimated as per the stats page, so there will be some PSU loss, and you can divide by 0.92 to get a more accurate power draw.

SP20: ~ 1060GH/s

>snipped images<

looks great. what is your chip voltage and fan settings?

Temp Front / Back T,B
27 °C / 50,51 °C
Fan Speed
30
Start Voltage
0.62 / 0.625 / 0.62 / 0.62
Max Voltage
0.625
Max Watts
120 / 120 / 120 / 120

can't hear it from the lounge anymore Cry

disclaimer - i miss having my sp10's around Grin

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: raskul on December 22, 2014, 11:48:48 AM

finally found a few hours to tinker with the miners i have at home

note: these values are not metered at the wall, as I do not have a meter to test exactly... so w/gh is estimated as per the stats page, so there will be some PSU loss, and you can divide by 0.92 to get a more accurate power draw.

SP20: ~ 1060GH/s

>snipped images<

looks great. what is your starting and max chip voltage settings?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Guy Corem on December 22, 2014, 08:40:25 AM

Quote from: teeGUMES on December 22, 2014, 08:34:33 AM

Quote from: philipma1957 on December 22, 2014, 08:33:12 AM

Quote from: Guy Corem on December 22, 2014, 08:29:08 AM

Quote from: philipma1957 on December 22, 2014, 08:24:57 AM

Fast question. I want to take a sp20 running here and bring it to my friends office. He has really cheap power deal. 3 cents a kwatt.

His net work router is 192.168.1.1

my miner is on a router that is 192.168.0.1

I have the miner with use DHCP marked off.

I assume it will find an open address on the new router lets say 192.168.1.101

If not do I have a factory reset option?

Enable DHCP again before turn it off.
Factory reset will re-enable DHCP.

Alternatively, ask your friend to (1) lease IP address in the DHCP table based on the miner MAC in advance (2) range of IP addresses outside DHCP range and pre-configure your miner to this IP address.

yes i left DHCP checked

where is the factory reset option located?

Settings, scroll all the way to the bottom. Second last option.

If you left the DHCP off and you're in a new network with different addresses, you'll need to do SD Recovery to re-enable the DHCP.

no I left it checked and all is good. I set it up and it is running. we are running his at 1475gh and around 900 watts. he has cheap power. So a faster clock makes sense.

raskul

sr. member

Activity: 434

Merit: 250

finally found a few hours to tinker with the miners i have at home

note: these values are not metered at the wall, as I do not have a meter to test exactly... so w/gh is estimated as per the stats page, so there will be some PSU loss, and you can divide by 0.92 to get a more accurate power draw.

SP20: ~ 1060GH/s

SP31: ~ 3888GH/s

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: teeGUMES on December 22, 2014, 08:34:33 AM

Quote from: philipma1957 on December 22, 2014, 08:33:12 AM

Quote from: Guy Corem on December 22, 2014, 08:29:08 AM

Quote from: philipma1957 on December 22, 2014, 08:24:57 AM

Fast question. I want to take a sp20 running here and bring it to my friends office. He has really cheap power deal. 3 cents a kwatt.

His net work router is 192.168.1.1

my miner is on a router that is 192.168.0.1

I have the miner with use DHCP marked off.

I assume it will find an open address on the new router lets say 192.168.1.101

If not do I have a factory reset option?

Enable DHCP again before turn it off.
Factory reset will re-enable DHCP.

Alternatively, ask your friend to (1) lease IP address in the DHCP table based on the miner MAC in advance (2) range of IP addresses outside DHCP range and pre-configure your miner to this IP address.

yes i left DHCP checked

where is the factory reset option located?

Settings, scroll all the way to the bottom. Second last option.

If you left the DHCP off and you're in a new network with different addresses, you'll need to do SD Recovery to re-enable the DHCP.

teeGUMES

legendary

Activity: 1253

Merit: 1203

Quote from: philipma1957 on December 22, 2014, 08:33:12 AM

Quote from: Guy Corem on December 22, 2014, 08:29:08 AM

Quote from: philipma1957 on December 22, 2014, 08:24:57 AM

Fast question. I want to take a sp20 running here and bring it to my friends office. He has really cheap power deal. 3 cents a kwatt.

His net work router is 192.168.1.1

my miner is on a router that is 192.168.0.1

I have the miner with use DHCP marked off.

I assume it will find an open address on the new router lets say 192.168.1.101

If not do I have a factory reset option?

Enable DHCP again before turn it off.
Factory reset will re-enable DHCP.

Alternatively, ask your friend to (1) lease IP address in the DHCP table based on the miner MAC in advance (2) range of IP addresses outside DHCP range and pre-configure your miner to this IP address.

yes i left DHCP checked

where is the factory reset option located?

Settings, scroll all the way to the bottom. Second last option.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Guy Corem on December 22, 2014, 08:29:08 AM

Quote from: philipma1957 on December 22, 2014, 08:24:57 AM

Fast question. I want to take a sp20 running here and bring it to my friends office. He has really cheap power deal. 3 cents a kwatt.

His net work router is 192.168.1.1

my miner is on a router that is 192.168.0.1

I have the miner with use DHCP marked off.

I assume it will find an open address on the new router lets say 192.168.1.101

If not do I have a factory reset option?

Enable DHCP again before turn it off.
Factory reset will re-enable DHCP.

Alternatively, ask your friend to (1) lease IP address in the DHCP table based on the miner MAC in advance (2) range of IP addresses outside DHCP range and pre-configure your miner to this IP address.

yes i left DHCP checked

where is the factory reset option located?

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: philipma1957 on December 22, 2014, 08:24:57 AM

Fast question. I want to take a sp20 running here and bring it to my friends office. He has really cheap power deal. 3 cents a kwatt.

His net work router is 192.168.1.1

my miner is on a router that is 192.168.0.1

I have the miner with use DHCP marked off.

I assume it will find an open address on the new router lets say 192.168.1.101

If not do I have a factory reset option?

Enable DHCP again before turn it off.
Factory reset will re-enable DHCP.

Alternatively, ask your friend to (1) lease IP address in the DHCP table based on the miner MAC in advance (2) range of IP addresses outside DHCP range and pre-configure your miner to this IP address.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: philipma1957 on December 22, 2014, 08:24:57 AM

Fast question. I want to take a sp20 running here and bring it to my friends office. He has really cheap power deal. 3 cents a kwatt.

His net work router is 192.168.1.1

my miner is on a router that is 192.168.0.1

I have the miner with use DHCP marked off.

I assume it will find an open address on the new router lets say 192.168.1.101

If not do I have a factory reset option?

with DHCP checked, it will automatically find an IP address.
EDIT: it may take a few minutes to show up in myminer.io

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Fast question. I want to take a sp20 running here and bring it to my friends office. He has really cheap power deal. 3 cents a kwatt.

His net work router is 192.168.1.1

my miner is on a router that is 192.168.0.1

I have the miner with use DHCP marked off.

I assume it will find an open address on the new router lets say 192.168.1.101

If not do I have a factory reset option?

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: ?? on ??

have to report - the 100 usd offer that was eventually honoured via a new order number has actually not been honoured at all.

the full price was paid and no refund/rebate has been forthcoming.

quite lame!

PM the issue in details.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 228. (Read 1260290 times)