[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 230.

Hunger

member

Activity: 85

Merit: 10

Quote from: teeGUMES on December 20, 2014, 03:14:40 PM

Quote from: Hunger on December 20, 2014, 02:11:34 PM

LOOP[2] OFF TO:0 (test serial failed or something)
4: disabled (i2c BAD, btw!)
5: disabled (i2c BAD, btw!)
LOOP[3] OFF TO:0 (test serial failed or something)
6: disabled (i2c BAD, btw!)
7: disabled (i2c BAD, btw!)

ok this cant be good?!

this happened to me and it was because one of my pci-e cables came unplugged

exactly what happend!, stupid for not checking
but units is running fine now.

zvisha

hero member

Activity: 560

Merit: 500

Quote from: Hunger on December 20, 2014, 02:11:34 PM

LOOP[2] OFF TO:0 (test serial failed or something)
4: disabled (i2c BAD, btw!)
5: disabled (i2c BAD, btw!)
LOOP[3] OFF TO:0 (test serial failed or something)
6: disabled (i2c BAD, btw!)
7: disabled (i2c BAD, btw!)

ok this cant be good?!

No 12V to the hashing (main) boards. Only 5V to mgmt.

teeGUMES

legendary

Activity: 1253

Merit: 1203

Quote from: Hunger on December 20, 2014, 02:11:34 PM

LOOP[2] OFF TO:0 (test serial failed or something)
4: disabled (i2c BAD, btw!)
5: disabled (i2c BAD, btw!)
LOOP[3] OFF TO:0 (test serial failed or something)
6: disabled (i2c BAD, btw!)
7: disabled (i2c BAD, btw!)

ok this cant be good?!

this happened to me and it was because one of my pci-e cables came unplugged

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Hunger on December 20, 2014, 02:11:34 PM

ok this cant be good?!

have you got it set at stock (basic) settings? or have you tinkered with the voltages?

Hunger

member

Activity: 85

Merit: 10

LOOP[2] OFF TO:0 (test serial failed or something)
4: disabled (i2c BAD, btw!)
5: disabled (i2c BAD, btw!)
LOOP[3] OFF TO:0 (test serial failed or something)
6: disabled (i2c BAD, btw!)
7: disabled (i2c BAD, btw!)

ok this cant be good?!

wajiminer

full member

Activity: 134

Merit: 100

Quote from: samsonn25 on December 19, 2014, 11:08:04 PM

Quote from: wajiminer on December 19, 2014, 10:54:17 PM

I just ordered the 3 pack of sp20's.. went to the bank and did the bank transfer today.. boy was that fun Roll Eyes

My bank wire transfer paperwork after I did it said they might not get it till 1/6/15 Angry

At that point it was too late to cancel the wire

Anything longer than 3-4 days is outrageous, unless they are purposely holding the funds to make sure you or the recipient are not terrorists or criminals.

They said it could be faster than that which is what I'm hoping for

RHA

sr. member

Activity: 392

Merit: 250

Quote from: zvisha on December 20, 2014, 05:07:15 AM

2.5.52 link fixed.

Thanks, Zvisha.
But wait... Why the key value is not 646? Wink

Quote from: zvisha on July 30, 2014, 03:46:07 AM

"Number 646 is a compilation of the energies and vibrations of number 6 and number 4, with number 6 appearing repeated, amplifying its influences. Number 6 lends its attributes of stability and grace, acquisition, healing, love of home and family, protection, care and nurturing, solution-finding and problem-solving, reliability and responsibility, integrity and honesty...

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: philipma1957 on December 20, 2014, 06:27:23 AM

Quote from: mdude77 on December 20, 2014, 06:01:38 AM

Quote from: raskul on December 20, 2014, 05:03:40 AM

how many rooms can warm with it? my SP20 does the entire downstairs of my flat
what's the w/gh?

According to the bitmain site: Power Efficiency: 0.8 Watt/GH/s at the wall

M

if the c1 does 1th at 790 watts-----------------------------------it does

and the spondoolies does 1350 th at 750 watts ---------------it does

one is doing .79 the other is doing .55 if your power is more then 10 cents a kwatt the sp20 has value.

the c1 is quiet the s-3 can be made to run quiet

the sp20 is not that quiet. so figure that and make a pick

There's no doubt the SP20 is more efficient.

M

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mdude77 on December 20, 2014, 06:01:38 AM

Quote from: raskul on December 20, 2014, 05:03:40 AM

how many rooms can warm with it? my SP20 does the entire downstairs of my flat
what's the w/gh?

According to the bitmain site: Power Efficiency: 0.8 Watt/GH/s at the wall

M

if the c1 does 1th at 790 watts-----------------------------------it does

and the spondoolies does 1350 th at 750 watts ---------------it does

one is doing .79 the other is doing .55 if your power is more then 10 cents a kwatt the sp20 has value.

the c1 is quiet the s-3 can be made to run quiet

the sp20 is not that quiet. so figure that and make a pick

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: raskul on December 20, 2014, 05:03:40 AM

how many rooms can warm with it? my SP20 does the entire downstairs of my flat
what's the w/gh?

According to the bitmain site: Power Efficiency: 0.8 Watt/GH/s at the wall

M

zvisha

hero member

Activity: 560

Merit: 500

2.5.52 link fixed.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: mdude77 on December 20, 2014, 04:46:00 AM

Quote from: raskul on December 20, 2014, 02:01:31 AM

Quote from: grn on December 19, 2014, 11:17:28 PM

Will there be a price drop on SP20 soon? I would like to try out SP20 but find it hard to justify as the christmas special price is more than 2 BITMAIN C1.

SP20 $.440/ghs
BITMAIN C1 $.323/ghs

Adds up when looking for multiple units,making a tough ROI even less likely

ewwww i couldn't be bothered babysitting a liquid cooled miner, and those accessories are hideously cheap quality.
you get what you pay for, right enough Grin

The C1 runs pretty well. I haven't had to do anything with it. It does require an external PSU, though ... and the accessories are CCC. And it's MILES quieter than any SP device.

M

how many rooms can warm with it? my SP20 does the entire downstairs of my flat
what's the w/gh?

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: raskul on December 20, 2014, 02:01:31 AM

Quote from: grn on December 19, 2014, 11:17:28 PM

Will there be a price drop on SP20 soon? I would like to try out SP20 but find it hard to justify as the christmas special price is more than 2 BITMAIN C1.

SP20 $.440/ghs
BITMAIN C1 $.323/ghs

Adds up when looking for multiple units,making a tough ROI even less likely

ewwww i couldn't be bothered babysitting a liquid cooled miner, and those accessories are hideously cheap quality.
you get what you pay for, right enough Grin

The C1 runs pretty well. I haven't had to do anything with it. It does require an external PSU, though ... and the accessories are CCC. And it's MILES quieter than any SP device.

M

raskul

sr. member

Activity: 434

Merit: 250

Quote from: grn on December 19, 2014, 11:17:28 PM

Will there be a price drop on SP20 soon? I would like to try out SP20 but find it hard to justify as the christmas special price is more than 2 BITMAIN C1.

SP20 $.440/ghs
BITMAIN C1 $.323/ghs

Adds up when looking for multiple units,making a tough ROI even less likely

ewwww i couldn't be bothered babysitting a liquid cooled miner, and those accessories are hideously cheap quality.
you get what you pay for, right enough Grin

sjc1490

hero member

Activity: 546

Merit: 500

Quote from: judypug1956 on December 19, 2014, 11:35:17 PM

Quote from: sjc1490 on December 19, 2014, 11:29:52 PM

Quote from: Biodom on December 19, 2014, 11:25:00 PM

I think that you have to measure watts at the wall with kill-a-watt or something similar.

Good point I will try that, I actually have one of the meters around the office somewhere. Now you got me wondering how big difference is going to be.

the 775 should be devided by .9 = 850 watts maybe 875 watts

Thanks appreciate it, I will take that for 1.5 TH.

judypug1956

sr. member

Activity: 355

Merit: 276

Quote from: sjc1490 on December 19, 2014, 11:29:52 PM

Quote from: Biodom on December 19, 2014, 11:25:00 PM

I think that you have to measure watts at the wall with kill-a-watt or something similar.

Good point I will try that, I actually have one of the meters around the office somewhere. Now you got me wondering how big difference is going to be.

the 775 should be devided by .9 = 850 watts maybe 875 watts

sjc1490

hero member

Activity: 546

Merit: 500

Quote from: Biodom on December 19, 2014, 11:25:00 PM

I think that you have to measure watts at the wall with kill-a-watt or something similar.

Good point I will try that, I actually have one of the meters around the office somewhere. Now you got me wondering how big difference is going to be.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: sjc1490 on December 19, 2014, 11:15:16 PM

Quote from: mitak64 on December 19, 2014, 11:11:02 PM

Quote from: sjc1490 on December 19, 2014, 11:00:01 PM

Quick question, have a new SP20E tweaked to run 1500 GH at 775 W.

Care to share the setting you used to achieve that ?

Sure,

Fan: 90% (It is inside at room temp)
Starting volts: 0.72 all 4
Max volts: 0.725
Max PSU: 280 all 4

PSU = EVGA 1300

Edit:
http://i1278.photobucket.com/albums/y506/sjc1490/NewASIC_zps7a49fdd7.jpg

I think that you have to measure watts at the wall with kill-a-watt or something similar.

grn

sr. member

Activity: 357

Merit: 252

Will there be a price drop on SP20 soon? I would like to try out SP20 but find it hard to justify as the christmas special price is more than 2 BITMAIN C1.

SP20 $.440/ghs
BITMAIN C1 $.323/ghs

Adds up when looking for multiple units,making a tough ROI even less likely

sjc1490

hero member

Activity: 546

Merit: 500

Quote from: mitak64 on December 19, 2014, 11:11:02 PM

Quote from: sjc1490 on December 19, 2014, 11:00:01 PM

Quick question, have a new SP20E tweaked to run 1500 GH at 775 W.

Care to share the setting you used to achieve that ?

Sure,

Fan: 90% (It is inside at room temp)
Starting volts: 0.72 all 4
Max volts: 0.725
Max PSU: 280 all 4

PSU = EVGA 1300

Edit:
http://i1278.photobucket.com/albums/y506/sjc1490/NewASIC_zps7a49fdd7.jpg

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 230. (Read 1260290 times)