Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 240. (Read 1260290 times)
December 15, 2014, 09:00:09 AM
December 15, 2014, 02:18:40 AM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.ioMy router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
I did all this, I also assigned another ip, I cleared cache, I tried connecting from another laptop from same network, I even tried from my phone.Nothing seems to work
Please help !
Can anyone from your team give me some support ? maybe connect to me via TeamViewer and help me out ?
If it won't work, contact tech.support@ for diagnostic and RMA if needed.
I don't have an Micro SD card yet, since the SP20 has a USB slot, can it be done with an USD stick as well ?
December 15, 2014, 02:07:31 AM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.ioMy router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
I did all this, I also assigned another ip, I cleared cache, I tried connecting from another laptop from same network, I even tried from my phone.Nothing seems to work
Please help !
Can anyone from your team give me some support ? maybe connect to me via TeamViewer and help me out ?
If it won't work, contact tech.support@ for diagnostic and RMA if needed.
I don't have an Micro SD card yet, since the SP20 has a USB slot, can it be done with an USD stick as well ?
December 15, 2014, 01:29:42 AM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.ioMy router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
I did all this, I also assigned another ip, I cleared cache, I tried connecting from another laptop from same network, I even tried from my phone.Nothing seems to work
Please help !
Can anyone from your team give me some support ? maybe connect to me via TeamViewer and help me out ?
If it won't work, contact tech.support@ for diagnostic and RMA if needed.
where can I find this recovery procedure blog ?
http://www.spondoolies-tech.com/blogs/technical-blog/13098521-sp10-sp2x-sp3x-recovery-sd-card-boot-sd-card-creation-instructions
December 15, 2014, 01:27:34 AM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.ioMy router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
I did all this, I also assigned another ip, I cleared cache, I tried connecting from another laptop from same network, I even tried from my phone.Nothing seems to work
Please help !
Can anyone from your team give me some support ? maybe connect to me via TeamViewer and help me out ?
If it won't work, contact tech.support@ for diagnostic and RMA if needed.
where can I find this recovery procedure blog ?
December 15, 2014, 12:13:32 AM
Thanks again to the spondoolies team who have now also donated an SP20 for continued cgminer support! 
Man, that's cool! I don't see Bitmain doing that, eh!
December 15, 2014, 12:07:02 AM
Thanks again to the spondoolies team who have now also donated an SP20 for continued cgminer support!
well deserved, iMHO
December 14, 2014, 11:28:28 PM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.ioMy router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
I did all this, I also assigned another ip, I cleared cache, I tried connecting from another laptop from same network, I even tried from my phone.Nothing seems to work
Please help !
Can anyone from your team give me some support ? maybe connect to me via TeamViewer and help me out ?
If it won't work, contact tech.support@ for diagnostic and RMA if needed.
December 14, 2014, 10:55:42 PM
Thanks again to the spondoolies team who have now also donated an SP20 for continued cgminer support!
December 14, 2014, 06:18:34 PM
Half of my 10x SP30s dont work very well.
I dont believe they can work for many months.
How can you ROI in such investment?
I dont believe they can work for many months.
How can you ROI in such investment?
Can you be a bit more specific?
Also some insight into the environment they are in?
Some of them had to disable cores to let them start again.
Which means I have bad cores recently.
A couple of others fall to half speed because of psus.
Need to reboot and they are back again for a few days.
The enviroment is a sealed 20ft container with air filters inhaling from the outside air and raw direct sealed exhaling.
Temps are quite low not exceeding the 70 C in the outlet.
December 14, 2014, 04:05:25 PM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.ioMy router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
I did all this, I also assigned another ip, I cleared cache, I tried connecting from another laptop from same network, I even tried from my phone.Nothing seems to work
Please help !
+1
i tried to help via teamviewer and we tried to ssh, but the miner isn't allowing access, for some strange reason.
I'd maybe have done better via terminal on a mac but with putty it's the same principle and we couldn't get access to the miner.
hoping someone can help our friend above, better than I was able.
December 14, 2014, 04:03:01 PM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.ioMy router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
I did all this, I also assigned another ip, I cleared cache, I tried connecting from another laptop from same network, I even tried from my phone.Nothing seems to work
Please help !
Can anyone from your team give me some support ? maybe connect to me via TeamViewer and help me out ?
December 14, 2014, 02:10:24 PM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Try to access via another laptop/desktop on the same network, browse to http://myminer.io My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
December 14, 2014, 12:06:51 PM
ok don´t be angry vortexz but you have tried turn off and on a again
seriously it works for me
seriously it works for me
December 14, 2014, 11:58:07 AM
how can I ssh ?
please explain
please explain
use putty on a windows machine or terminal on a mac.
Do you have skype? can you help me via teamviewer ? please !
* raskul runs a mile
December 14, 2014, 11:57:27 AM
how can I ssh ?
please explain
please explain
use putty on a windows machine or terminal on a mac.
Do you have skype? can you help me via teamviewer ? please !
December 14, 2014, 11:54:46 AM
how can I ssh ?
please explain
please explain
use putty on a windows machine or terminal on a mac.
December 14, 2014, 11:54:24 AM
how can I ssh ?
please explain
please explain
December 14, 2014, 11:53:02 AM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Then it changed IP, when it happens i need to find the correct ip in my router.
the ip is .100 !
I scanned with angry ip scanner, that is the ip !
Router also shows me it's 192.168.1.100 asigned to the device
something else is wrong !
Can you ssh into it?
December 14, 2014, 11:46:39 AM
I have 2 SP20s, for one of them I can not acces the settings page anymore,
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
My router assiged the following ip adresees : 192.168.1.99 and 192.168.1.100
I can access just fine the one ending with 99
But I can not acces the one with 100 anymore saying that the web page is not available when I try accessing it from my browser
Both of them are up and mining, they have the pool settings stored, I just can't access one of them's menu
this are the ip's asigned by the router: http://gyazo.com/1dcfb737298ce594e928aa99131f1dac
Any ideeas? thank you !
Then it changed IP, when it happens i need to find the correct ip in my router.
the ip is .100 !
I scanned with angry ip scanner, that is the ip !
Router also shows me it's 192.168.1.100 asigned to the device
something else is wrong !
have you tried bringing the GUI up in a different browser?
Jump to: