BitFury finally started to deploy its 16nm
and i really wait for your deployment 
You mean UNemployment
Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 9. (Read 1260354 times)
October 13, 2016, 03:07:59 AM
You mean UNemployment
October 13, 2016, 02:00:11 AM
BitFury finally started to deploy its 16nm
and i really wait for your deployment 
October 12, 2016, 11:59:27 PM
BitFury finally started to deploy its 16nm
October 07, 2016, 11:00:23 PM
actually instead of pming them to ya ill just leave them in the thread for u to grab them.
sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run)
http://www.filedropper.com/sd-boot-work-2614
sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run)
http://www.filedropper.com/sd-boot-work-2614
mega mirror here.
thanks dogie
October 07, 2016, 02:44:16 PM
actually instead of pming them to ya ill just leave them in the thread for u to grab them.
sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run)
http://www.filedropper.com/sd-boot-work-2614
sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run)
http://www.filedropper.com/sd-boot-work-2614
mega mirror here.
October 06, 2016, 10:00:26 PM
actually instead of pming them to ya ill just leave them in the thread for u to grab them.
sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run)
http://www.filedropper.com/sd-boot-work-2614
sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run)
http://www.filedropper.com/sd-boot-work-2614
October 06, 2016, 09:26:25 PM
mega mirror here.
October 06, 2016, 08:59:44 PM
sp20 recovery fw
http://www.filedropper.com/sd-recovery
if anyone can tell me a better hosting service let me know , il upload the sd card boot image here in a lil bit as well
http://www.filedropper.com/sd-recovery
if anyone can tell me a better hosting service let me know , il upload the sd card boot image here in a lil bit as well
I'd host files like this for anyone , too bad there is no "updated" recovery stick
ill pm u links to neptune fw/recovery and also the sd boot for the sp20 , ill see what other fw's i have laying around that are no longer able to be had online
my internet is slow as hell at home so will take me some time to upload the others
October 06, 2016, 04:20:29 PM
sp20 recovery fw
http://www.filedropper.com/sd-recovery
if anyone can tell me a better hosting service let me know , il upload the sd card boot image here in a lil bit as well
http://www.filedropper.com/sd-recovery
if anyone can tell me a better hosting service let me know , il upload the sd card boot image here in a lil bit as well
I'd host files like this for anyone , too bad there is no "updated" recovery stick
October 06, 2016, 11:07:11 AM
sp20 recovery fw
http://www.filedropper.com/sd-recovery
if anyone can tell me a better hosting service let me know , il upload the sd card boot image here in a lil bit as well
http://www.filedropper.com/sd-recovery
if anyone can tell me a better hosting service let me know , il upload the sd card boot image here in a lil bit as well
October 04, 2016, 10:01:02 PM
Hi i make a recovery with SD image posted here and access fine to webgui, but now my sp30 show no cgminer installed and cgminer version NA, the option Upload FW file dont show in firmware tab, how upload the spon_2.7.1.tar file? 
September 27, 2016, 04:13:46 AM
Is there maybe a solution to put the SP30 in a custom-made soundproof cabinet? I have 2 sq meters of soundproof acoustic foam like this
http://www.ebay.com/itm/Fireproofing-Soundproofing-Acoustic-Studio-Decor-Wall-Foam-Board-Panel-1M-X-1M-/251809437610?hash=item3aa10317aa
http://www.ebay.com/itm/Fireproofing-Soundproofing-Acoustic-Studio-Decor-Wall-Foam-Board-Panel-1M-X-1M-/251809437610?hash=item3aa10317aa
September 24, 2016, 01:36:00 PM
I need to make my SP30 as quiet as possible, fan speed at 40% maximum.
With lowest voltage setting, 0.620 Volts, and 30 degrees Celcius intake temperature, I get around 55 degrees exhaust temperature. All ASIC temps stay at 85 degrees. Hashrate around 2500Ghs.
How far do you think I can push it with fans staying at 40%? Should I go as high as 70-75 degrees exhaust provided the chips are below 125 degrees? And I don't want to risk a fire..
With lowest voltage setting, 0.620 Volts, and 30 degrees Celcius intake temperature, I get around 55 degrees exhaust temperature. All ASIC temps stay at 85 degrees. Hashrate around 2500Ghs.
How far do you think I can push it with fans staying at 40%? Should I go as high as 70-75 degrees exhaust provided the chips are below 125 degrees? And I don't want to risk a fire..
the sp stuff is nice as it will throttle if it gets hot to avoid damage
all my sp20's are now running .58-.61v with fans at 30%-40% i get 900-1000gh out of each at with a pair of them running off 1000w psus and it keeps them below 115*
i havent tried that with my sp31 yet but i bet it would do the same as the sp20's , just keep the exhaust pointed away from anything flamable
my sp31 is in my datacenter with cheap power so i run it full out , but im half tempted to see how efficiant it can get undervolted
September 24, 2016, 09:09:16 AM
I need to make my SP30 as quiet as possible, fan speed at 40% maximum.
With lowest voltage setting, 0.620 Volts, and 30 degrees Celcius intake temperature, I get around 55 degrees exhaust temperature. All ASIC temps stay at 85 degrees. Hashrate around 2500Ghs.
How far do you think I can push it with fans staying at 40%? Should I go as high as 70-75 degrees exhaust provided the chips are below 125 degrees? And I don't want to risk a fire..
With lowest voltage setting, 0.620 Volts, and 30 degrees Celcius intake temperature, I get around 55 degrees exhaust temperature. All ASIC temps stay at 85 degrees. Hashrate around 2500Ghs.
How far do you think I can push it with fans staying at 40%? Should I go as high as 70-75 degrees exhaust provided the chips are below 125 degrees? And I don't want to risk a fire..
September 20, 2016, 09:37:01 PM
If anyone has a spare controller board for an SP20, let me know how much you want for it. Mine had a resistor burn up on it...
crushed drop me a pm looks like i have a spare controller and 1 hashboard as well
We have 10x sets of parts for any SP20. contact us for parts.
September 17, 2016, 05:56:36 PM
If anyone has a spare controller board for an SP20, let me know how much you want for it. Mine had a resistor burn up on it...
crushed drop me a pm looks like i have a spare controller and 1 hashboard as well
September 15, 2016, 11:49:53 PM
If anyone has a spare controller board for an SP20, let me know how much you want for it. Mine had a resistor burn up on it...
September 15, 2016, 10:35:29 PM
i pulled my sp20's oput of my dc today and bought them home to replace my way outdated s2's , im trying to downclock them to around 500w at the wall to keep noise down to a minimum.
my question is how accurate is the section were it says "wall watts" ass seen in this screenshot i just grabbed
i dont currently have a kill-a-watt to check power use
my question is how accurate is the section were it says "wall watts" ass seen in this screenshot i just grabbed
i dont currently have a kill-a-watt to check power use
September 15, 2016, 06:47:36 PM
i actually got the sd recovery to work , what i ended up having to do after finally getting into the dashboard was doing a factory reset , and then the miner started working properly .
does anyone have the latest sp20 firmware , as the sd recovery reverts it back tot he original fw
also if anyone needs copies of the sd recovery , or sd boot images i have both
does anyone have the latest sp20 firmware , as the sd recovery reverts it back tot he original fw
also if anyone needs copies of the sd recovery , or sd boot images i have both
might be getting a hold of you (will wait may just use them as doorstops) someone is giving me for shipping an sp10,sp20,sp30 ...so if I only had an ice fishing house
I needed a space heater for and inet access I'd be all set (and ear plugs)
sheesh...but always wanted some ..may just fire them up to look them over....but at 14c kwh probably (er likely) not gonna run them (unless the furnace goes out and I
really really need loud space heaters)
anyway couple weeks I may be asking for help on here just to watch them run
ouch i have a hard time running my sp20's at full power at 4c kwh
at full power ur talking a 2+$ a day loss on a full power sp20 at 14c kwh
yeah just a toy to look over ...so only use will be an 'emergency space heater" but will be fun to look at
(man do I need a BTC pump..wonder if 1000 usd btc would even be enough?) Jump to: