Topic: [ANN] Syscoin - Business on the Blockchain - LAUNCHED! - page 153. (Read 490229 times)
How bout newbs update your wallets.. LOL dumb
Stop cying for a refund!
If you marry a hot babe, and she turns out to have a few flaws would you cry for a divorce? NO.
Have some patience, things will work out. Go do some promotion instead, and let the devs work!
If you marry a hot babe, and she turns out to have a few flaws would you cry for a divorce? NO.
Have some patience, things will work out. Go do some promotion instead, and let the devs work!
But if that hot babe turns out to have a full set of Block and Tackle bigger than your own, you have got to doubt your good judgement....
Here are two steps one can try:
a. Use Danosphere's bootstrap.dat --> It will get you synced for the most part. Then you will struggle connecting to the blockchain. It will not work.
b. Use the conf and put in:
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
Then forget your coins. The program will quit mid-way with an error - "can't open database file wallet.dat error -30974"
a. Use Danosphere's bootstrap.dat --> It will get you synced for the most part. Then you will struggle connecting to the blockchain. It will not work.
b. Use the conf and put in:
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
Then forget your coins. The program will quit mid-way with an error - "can't open database file wallet.dat error -30974"
a refund is not going to happen obviously dream on crybabys 
No problem for me cupcake
I only invested 1 btc Moolah and mintpal will forever lose my business and I'm sure after this. No one will want to go back there. Are you reading, mintpal? This was a failed coin from the start and met non of the criteria as a working coin. Refund to build customers faith in your exchange
Stop cying for a refund!
If you marry a hot babe, and she turns out to have a few flaws would you cry for a divorce? NO.
Have some patience, things will work out. Go do some promotion instead, and let the devs work!
If you marry a hot babe, and she turns out to have a few flaws would you cry for a divorce? NO.
Have some patience, things will work out. Go do some promotion instead, and let the devs work!
finally, mine is working well.
a refund is not going to happen obviously dream on crybabys
stuck at 1663.
Moonriver, did you add the nodes? Try that.
if you are on the wrong fork:
1. close your wallet
2. go to your data dir and wipe everyting BUT peers.dat, wallet.dat and the .conf file
3. put this file in that folder: https://mega.co.nz/#!HFMQSIrJ!g6BGdCv48RT11sgFOTsFiFbjoiR7DvrCum8kMw7EpH0
4. reopen wallet and wait for sync + connections
Put this in syscoin.conf file and delete what is there.
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
Can I just get a refund now? Its been 36hrs and still so many issues.
No refund. If people would just read and follow the instructions that are posted on every page you would be up and running already. When Mintpal goes live with deposits just send your coins there and dump into the walls.
Go to task manager and kill syscoin-qt.exe
Go to the start menu and type run and hit enter then type %APPDATA% and hit enter
Open syscoin folder.
Delete everything but the syscoin.conf and wallet.dat file.
Open syscoin program again. Everything will sync and you should be on the latest block.
Many of us have done that - many times. I am now stuck on block 1794, and that is with Dano's bootstrap.dat file download from previous page.
Working fine! 
it's working for me.
mine is working perfectly. delete everything except wallet.dat in %appdata% syscoin folder and addnodes
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
to your config, delete everything else on config
than open the fresh install and let it sync
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
to your config, delete everything else on config
than open the fresh install and let it sync
stuck at 1663.
Moonriver, did you add the nodes? Try that.
if you are on the wrong fork:
1. close your wallet
2. go to your data dir and wipe everyting BUT peers.dat, wallet.dat and the .conf file
3. put this file in that folder: https://mega.co.nz/#!HFMQSIrJ!g6BGdCv48RT11sgFOTsFiFbjoiR7DvrCum8kMw7EpH0
4. reopen wallet and wait for sync + connections
Put this in syscoin.conf file and delete what is there.
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
Can I just get a refund now? Its been 36hrs and still so many issues.
No refund. If people would just read and follow the instructions that are posted on every page you would be up and running already. When Mintpal goes live with deposits just send your coins there and dump into the walls.
Go to task manager and kill syscoin-qt.exe
Go to the start menu and type run and hit enter then type %APPDATA% and hit enter
Open syscoin folder.
Delete everything but the syscoin.conf and wallet.dat file.
Open syscoin program again. Everything will sync and you should be on the latest block.
stuck at 1663.
Moonriver, did you add the nodes? Try that.
if you are on the wrong fork:
1. close your wallet
2. go to your data dir and wipe everyting BUT peers.dat, wallet.dat and the .conf file
3. put this file in that folder: https://mega.co.nz/#!HFMQSIrJ!g6BGdCv48RT11sgFOTsFiFbjoiR7DvrCum8kMw7EpH0
4. reopen wallet and wait for sync + connections
That kind of helped. But now it's stuck on block 1794... Sounds like some pools are effing shit up. I am going to bed. I hope you tweet out the solution once it is reached. Too hard to chase down these BCT posts, even worse IRC...
stuck at 1663.
Moonriver, did you add the nodes? Try that.
if you are on the wrong fork:
1. close your wallet
2. go to your data dir and wipe everyting BUT peers.dat, wallet.dat and the .conf file
3. put this file in that folder: https://mega.co.nz/#!HFMQSIrJ!g6BGdCv48RT11sgFOTsFiFbjoiR7DvrCum8kMw7EpH0
4. reopen wallet and wait for sync + connections
Put this in syscoin.conf file and delete what is there.
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
I have been holding my nerves till now. Dano/snipsnoop - how about a refund now? This is just painful.
Real quick, since my knowledge is limited to investing and basic computer skills... how the fuck do I know if I'm on a fork?
stuck at 1663.
Moonriver, did you add the nodes? Try that.
if you are on the wrong fork:
1. close your wallet
2. go to your data dir and wipe everyting BUT peers.dat, wallet.dat and the .conf file
3. put this file in that folder: https://mega.co.nz/#!HFMQSIrJ!g6BGdCv48RT11sgFOTsFiFbjoiR7DvrCum8kMw7EpH0
4. reopen wallet and wait for sync + connections
Put this in syscoin.conf file and delete what is there.
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
stuck at 1663.
Moonriver, did you add the nodes? Try that.
if you are on the wrong fork:
1. close your wallet
2. go to your data dir and wipe everyting BUT peers.dat, wallet.dat and the .conf file
3. put this file in that folder: https://mega.co.nz/#!HFMQSIrJ!g6BGdCv48RT11sgFOTsFiFbjoiR7DvrCum8kMw7EpH0
4. reopen wallet and wait for sync + connections
Alright, one last post before bed then I am gonna worry about this shit tomorrow.
Currently stuck at block 1663. Below is the exact config file I have made. If you see an error, please point it out. Thanks ladies and gentlemen
addnode=node.syscoin.me
addnode=68.110.119.91
addnode=99.249.255.234
addnode=91.134.53.161
addnode=50.72.149.56
addnode=207.68.212.54
addnode=23.240.55.44
addnode=76.115.198.51
addnode=54.72.229.220
addnode=24.186.111.60
addnode=93.77.104.84
addnode=96.242.181.7
addnode=206.63.230.236
addnode=99.242.230.163
addnode=37.59.18.108
addnode=86.159.199.211
addnode=67.253.247.113
addnode=24.147.192.252
addnode=72.239.177.162
addnode=98.220.3.187
addnode=86.31.116.79
addnode=71.95.186.175
addnode=58.169.222.80
addnode=198.50.132.91
addnode=37.187.71.108
addnode=71.163.67.32
addnode=23.234.223.141
addnode=70.173.167.3
addnode=78.46.22.103
addnode=31.220.4.41
addnode=146.115.133.109
addnode=70.29.206.168
addnode=174.110.195.255
addnode=62.210.122.161
addnode=96.27.68.140
addnode=198.15.127.242
addnode=194.79.23.168
addnode=67.173.41.36
addnode=68.231.192.15
addnode=82.46.101.131
addnode=75.91.157.247
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
Currently stuck at block 1663. Below is the exact config file I have made. If you see an error, please point it out. Thanks ladies and gentlemen
addnode=node.syscoin.me
addnode=68.110.119.91
addnode=99.249.255.234
addnode=91.134.53.161
addnode=50.72.149.56
addnode=207.68.212.54
addnode=23.240.55.44
addnode=76.115.198.51
addnode=54.72.229.220
addnode=24.186.111.60
addnode=93.77.104.84
addnode=96.242.181.7
addnode=206.63.230.236
addnode=99.242.230.163
addnode=37.59.18.108
addnode=86.159.199.211
addnode=67.253.247.113
addnode=24.147.192.252
addnode=72.239.177.162
addnode=98.220.3.187
addnode=86.31.116.79
addnode=71.95.186.175
addnode=58.169.222.80
addnode=198.50.132.91
addnode=37.187.71.108
addnode=71.163.67.32
addnode=23.234.223.141
addnode=70.173.167.3
addnode=78.46.22.103
addnode=31.220.4.41
addnode=146.115.133.109
addnode=70.29.206.168
addnode=174.110.195.255
addnode=62.210.122.161
addnode=96.27.68.140
addnode=198.15.127.242
addnode=194.79.23.168
addnode=67.173.41.36
addnode=68.231.192.15
addnode=82.46.101.131
addnode=75.91.157.247
addnode=76.25.201.234:8369
addnode=67.253.247.113:8369
addnode=node.syscoin.me:6369
stuck at 1663.
Moonriver, did you add the nodes? Try that.
if you are on the wrong fork:
1. close your wallet
2. go to your data dir and wipe everyting BUT peers.dat, wallet.dat and the .conf file
3. put this file in that folder: https://mega.co.nz/#!HFMQSIrJ!g6BGdCv48RT11sgFOTsFiFbjoiR7DvrCum8kMw7EpH0
4. reopen wallet and wait for sync + connections
my wallet corrupted after one of the (many) crashes endured after wallet updated this coin is broken
it was a great idea but its too badly implemented good try but bad go see ya nxt time
Its working. it was a great idea but its too badly implemented good try but bad go see ya nxt time
Jump to: